SIST EN ISO 28199-2:2021

Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2021)

This document specifies methods for the determination of colour stability/colour evaluation, process
hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling of coating
materials applied to a test panel under defined conditions, using spray application process.

Beschichtungsstoffe - Beurteilung der durch Spritzapplikation bedingten Eigenschaften von Beschichtungssystemen - Teil 2: Farbstabilität, Prozessdeckvermögen, Anlösen, Spritznebelaufnahme, Benetzung, Oberflächenstruktur und Wolkigkeit (ISO 28199- 2:2021)

Dieses Dokument legt Verfahren zum Bestimmen von Farbstabilität/koloristische Bewertung, Prozessdeck¬vermögen, Anlösen, Spritznebelaufnahme, Benetzung, Oberflächenstruktur und Wolkigkeit von Beschich¬tungsstoffen und Beschichtungen, die mittels Spritzapplikation unter definierten Bedingungen auf Probenplatten appliziert wurden, fest.

Peintures et vernis - Évaluation des propriétés des systèmes de revêtement liées au mode d'application par pulvérisation - Partie 2 : Stabilité des couleurs, pouvoir masquant du procédé, détrempe, absorption des pertes de peinture à la pulvérisation, mouillage, texture superficielle et marbrures (ISO 28199-2:2021)

Le présent document spécifie des méthodes de détermination de la stabilité des couleurs/évaluation des couleurs, du pouvoir masquant du procédé, de la détrempe, de l'absorption des pertes de peinture à la pulvérisation, du mouillage, de la texture superficielle et des marbrures des produits de peinture appliqués sur un panneau d'essai dans des conditions définies, en utilisant un mode d'application.

Barve in laki - Vrednotenje lastnosti premaznih sistemov pri nanašanju s prašenjem - 2. del: Barvna stabilnost, kritnost, ponovno raztapljanje, absorpcija pri prašenju, omočljivost, struktura površine in lisavost (ISO 28199-2:2021)

General Information

• Status: Published
• Public Enquiry End Date: 14-Sep-2020
• Publication Date: 16-Aug-2021
• ICS: 87.040 - Paints and varnishes
• Technical Committee: IBLP - Paints and varnishes
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 11-Jul-2021
• Due Date: 15-Sep-2021
• Completion Date: 17-Aug-2021
• Ref Project: EN ISO 28199-2:2021 - Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2021)

Relations

• Replaces: SIST EN ISO 28199-2:2010 - Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2009)
• Effective Date: 01-Sep-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 28199-2:2021
01-september-2021
Nadomešča:
SIST EN ISO 28199-2:2010
Barve in laki - Vrednotenje lastnosti premaznih sistemov pri nanašanju s
prašenjem - 2. del: Barvna stabilnost, kritnost, ponovno raztapljanje, absorpcija pri
prašenju, omočljivost, struktura površine in lisavost (ISO 28199-2:2021)
Paints and varnishes - Evaluation of properties of coating systems related to the spray
application process - Part 2: Colour stability, process hiding power, re-dissolving,
overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2021)
Beschichtungsstoffe - Beurteilung der durch Spritzapplikation bedingten Eigenschaften
von Beschichtungssystemen - Teil 2: Farbstabilität, Prozessdeckvermögen, Anlösen,
Spritznebelaufnahme, Benetzung, Oberflächenstruktur und Wolkigkeit (ISO 28199-
2:2021)
Peintures et vernis - Évaluation des propriétés des systèmes de revêtement liées au
mode d'application par pulvérisation - Partie 2 : Stabilité des couleurs, pouvoir masquant
du procédé, détrempe, absorption des pertes de peinture à la pulvérisation, mouillage,
texture superficielle et marbrures (ISO 28199-2:2021)
Ta slovenski standard je istoveten z: EN ISO 28199-2:2021
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 28199-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 28199-2:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 28199-2:2021


EN ISO 28199-2
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2021
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 28199-2:2009
English Version

Paints and varnishes - Evaluation of properties of coating
systems related to the spray application process - Part 2:
Colour stability, process hiding power, re-dissolving,
overspray absorption, wetting, surface texture and
mottling (ISO 28199-2:2021)
Peintures et vernis - Évaluation des propriétés des Beschichtungsstoffe - Beurteilung der durch
systèmes de revêtement liées au mode d'application Spritzapplikation bedingten Eigenschaften von
par pulvérisation - Partie 2 : Stabilité des couleurs, Beschichtungssystemen - Teil 2: Farbstabilität,
pouvoir masquant du procédé, détrempe, absorption Prozessdeckvermögen, Anlösen, Spritznebelaufnahme,
des pertes de peinture à la pulvérisation, mouillage, Benetzung, Oberflächenstruktur und Wolkigkeit (ISO
texture superficielle et marbrures (ISO 28199-2:2021) 28199 2:2021)
This European Standard was approved by CEN on 6 June 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28199-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 28199-2:2021
EN ISO 28199-2:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 28199-2:2021
EN ISO 28199-2:2021 (E)
European foreword
This document (EN ISO 28199-2:2021) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2021, and conflicting national standards
shall be withdrawn at the latest by December 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 28199-2:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 28199-2:2021 has been approved by CEN as EN ISO 28199-2:2021 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 28199-2:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 28199-2:2021
INTERNATIONAL ISO
STANDARD 28199-2
Second edition
2021-06
Paints and varnishes — Evaluation of
properties of coating systems related
to the spray application process —
Part 2:
Colour stability, process hiding power,
re-dissolving, overspray absorption,
wetting, surface texture and mottling
Peintures et vernis — Évaluation des propriétés des systèmes de
revêtement liées au mode d'application par pulvérisation —
Partie 2: Stabilité des couleurs, pouvoir masquant du procédé,
détrempe, absorption des pertes de peinture à la pulvérisation,
mouillage, texture superficielle et marbrures
Reference number
ISO 28199-2:2021(E)
©
ISO 2021

---------------------- Page: 7 ----------------------
SIST EN ISO 28199-2:2021
ISO 28199-2:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 28199-2:2021
ISO 28199-2:2021(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Colour stability/colour evaluation . 1
4.1 General . 1
4.2 Evaluation . 1
5 Process hiding power . 3
5.1 General . 3
5.2 Evaluation . 3
6 Re-dissolving . 4
6.1 General . 4
6.2 Evaluation . 4
7 Overspray absorption . 5
7.1 General . 5
7.2 Evaluation . 5
8 Wetting . 6
8.1 General . 6
8.2 Evaluation . 6
9 Surface texture . 7
9.1 General . 7
9.2 Evaluation . 7
9.2.1 General evaluation . . 7
9.2.2 Evaluation of base coats . 7
9.2.3 Evaluation of clear coats . 8
10 Mottling . 9
10.1 General . 9
10.2 Evaluation . 9
10.2.1 Measurement techniques . 9
10.2.2 Visual evaluation .10
11 Test report .10
Bibliography .11
© ISO 2021 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 28199-2:2021
ISO 28199-2:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all
...

SLOVENSKI STANDARD
oSIST prEN ISO 28199-2:2020
01-september-2020
Barve in laki - Vrednotenje lastnosti premaznih sistemov pri nanašanju - 2. del:
Barvna stabilnost, kritnost, ponovno raztapljanje, absorpcija pri prašenju,
močljivost, struktura površine in lisavost (ISO/DIS 28199-2:2020)
Paints and varnishes - Evaluation of properties of coating systems related to the
application process - Part 2: Colour stability, process hiding power, re-dissolving,
overspray absorption, wetting, surface texture and mottling (ISO/DIS 28199-2:2020)
Beschichtungsstoffe - Beurteilung applikationsbedingter Eigenschaften von
Beschichtungssystemen - Teil 2: Farbstabilität, Prozessdeckvermögen, Anlösen,
Spritznebelaufnahme, Benetzung, Oberflächenstruktur und Wolkigkeit (ISO/DIS 28199-
2:2020)
Peintures et vernis -- Évaluation des propriétés des systèmes de revêtement liées au
mode d'application -- Partie 2: Stabilité des couleurs, pouvoir masquant du procédé,
détrempe, absorption des pertes de peinture à la pulvérisation, mouillage, texture
superficielle et marbrures (ISO/DIS 28199-2:2020)
Ta slovenski standard je istoveten z: prEN ISO 28199-2
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 28199-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 28199-2:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 28199-2:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 28199-2
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2020-06-23 2020-09-15
Paints and varnishes — Evaluation of properties of coating
systems related to the application process —
Part 2:
Colour stability, process hiding power, re-dissolving,
overspray absorption, wetting, surface texture and
mottling
Peintures et vernis — Évaluation des propriétés des systèmes de revêtement liées au mode d'application —
Partie 2: Stabilité des couleurs, pouvoir masquant du procédé, détrempe, absorption des pertes de peinture
à la pulvérisation, mouillage, texture superficielle et marbrures
ICS: 87.040
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 28199-2:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
oSIST prEN ISO 28199-2:2020
ISO/DIS 28199-2:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 28199-2:2020
ISO/DIS 28199-2:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Colour stability/colour evaluation . 1
4.1 General . 1
4.2 Evaluation . 1
5 Process hiding power . 3
5.1 General . 3
5.2 Evaluation . 3
6 Re-dissolving . 4
6.1 General . 4
6.2 Evaluation . 4
7 Overspray absorption . 5
7.1 General . 5
7.2 Evaluation . 5
8 Wetting . 6
8.1 General . 6
8.2 Evaluation . 6
9 Surface texture . 7
9.1 General . 7
9.2 Evaluation . 7
9.2.1 General evaluation . . 7
9.2.2 Evaluation of base coats . 7
9.2.3 Evaluation of clear coats . 8
10 Mottling . 9
10.1 General . 9
10.2 Evaluation . 9
10.2.1 Measurement techniques . 9
10.2.2 Visual evaluation .10
11 Test report .10
Bibliography .11
© ISO 2020 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 28199-2:2020
ISO/DIS 28199-2:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes.
This second edition cancels and replaces the first edition (ISO 28199-2:2009), which has been
technically revised.
The main changes compared to the previous edition are as follows:
— the assessment of mottling (10.2) has been divided into measuring techniques and visual evaluation;
— limit values have been introduced for long-wavelength and short-wavelength surface textures (9.2.1);
— the normative references have been updated;
— the standard has been editorially revised.
A list of all parts in the ISO 28199 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved

---------------------- Page: 6 ------------
...