Explosives for civil uses - Propellants and rocket propellants - Part 6: Solid rocket propellants - Guide for the determination of integrity of inhibitor coatings

This European Standard provides a guide to non-destructive testing (NDT) methods used for checking the integrity of inhibitor coatings of solid rocket propellants.

Explosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 6: Feste Raketentreibstoffe - Leitfaden zur Bestimmung der Integrität von Inhibitorbeschichtungen

Diese Europäische Norm gibt Leitlinien für zerstörungsfreie (ZfP-)Prüfverfahren zur Bestimmung der Integrität von Inhibitorbeschichtungen bei Raketenfesttreibstoffen.

Explosifs a usage civil - Propergol et blocs de propergol pour fusée - Partie 6: Bloc de propergol pour fusée - Guide de détermination de l'intégrité des revetements inhibiteurs

Eksplozivi za civilno uporabo - Smodniki in raketna goriva - 6. del: Trdna raketna goriva – Vodilo za ugotavljanje ustreznosti inhibitorskih prevlek

General Information

Status
Published
Publication Date
31-Aug-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2004
Due Date
01-Sep-2004
Completion Date
01-Sep-2004

Buy Standard

Standard
EN 13938-6:2004
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eksplozivi za civilno uporabo - Smodniki in raketna goriva - 6. del: Trdna raketna goriva – Vodilo za ugotavljanje ustreznosti inhibitorskih prevlekExplosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 6: Feste Raketentreibstoffe - Leitfaden zur Bestimmung der Integrität von InhibitorbeschichtungenExplosifs a usage civil - Propergol et blocs de propergol pour fusée - Partie 6: Bloc de propergol pour fusée - Guide de détermination de l'intégrité des revetements inhibiteursExplosives for civil uses - Propellants and rocket propellants - Part 6: Solid rocket propellants - Guide for the determination of integrity of inhibitor coatings71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13938-6:2004SIST EN 13938-6:2004en01-september-2004SIST EN 13938-6:2004SLOVENSKI
STANDARD



SIST EN 13938-6:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13938-6May 2004ICS 71.100.30English versionExplosives for civil uses - Propellants and rocket propellants -Part 6: Solid rocket propellants - Guide for the determination ofintegrity of inhibitor coatingsExplosifs à usage civil - Propergol et blocs de propergolpour fusée - Partie 6: Bloc de propergol pour fusée - Guidede détermination de l'intégrité des revêtements inhibiteursExplosivstoffe für zivile Zwecke - Treibladungspulver undRaketentreibstoffe - Teil 6: Feste Raketentreibstoffe -Leitfaden zur Bestimmung der Integrität vonInhibitorbeschichtungenThis European Standard was approved by CEN on 6 February 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13938-6:2004: ESIST EN 13938-6:2004



EN 13938-6:2004 (E)2ContentsPageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.54NDT methods.65Test report.6SIST EN 13938-6:2004



EN 13938-6:2004 (E)3ForewordThis document (EN 13938-6:2004) has been prepared by CEN /TC 321, "Explosives for civil uses", thesecretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by November 2004, and conflicting national standards shall be withdrawnat the latest by November 2004.This European Standard is one of a series of standards with the generic title Explosives for civil uses –Propellants and rocket propellants. The other parts of this series are listed below:prEN 13938-1Part 1: Requirements.prEN 13938-2Part 2: Determination of resistance to electrostatic energy.EN 13938-3Part 3: Determination of deflagration to detonation transition.EN 13938-4Part 4: Determination of burning rate under ambient conditions.prEN 13938-5Part 5: Solid rocket propellants. Determination of voids and fissures.prEN 13938-7Part 7: Determination of properties of black powder.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spai
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.