SIST EN 50109-2-5:1996

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications -- Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications

Part 2-5 of this European Standard specifies detail requirements for hand crimping tools incorporating a system of multiple indentors for use with Databus contacts of electrical connectors and similar components. Two tools are covered, as follows: a tool for contacts with crimp barrel size 22 (tool reference EN 50109-2-5-001), see clause 5; a tool for contacts with crimp barrel size 20 (tool reference EN 50109-2-5-002), see clause 5. It includes requirements for crimped joints made with the tools

Handcrimpwerkzeuge - Werkzeuge für den Crimpanschluß von elektrischen Leitungen und Drähten für Niederfrequenz- und für Hochfrequenzanwendungen -- Teil 2-5: Spezielle Anforderungen für den Anschluß von Kabeln mit zwei Innenleitern für Datenbusanwendungen

Outils de sertissage manuels - Outils pour sertir les câbles et fils électriques basse fréquence et radio-fréquence -- Partie 2-5: Sortie de câble 'twin-ax' pour applications bus de données

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus application

General Information

• Status: Published
• Publication Date: 30-Apr-1996
• ICS: 25.140.30 - Hand-operated tools
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-1996
• Due Date: 01-May-1996
• Completion Date: 01-May-1996
• Ref Project: EN 50109-2-5:1995 - Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50109-2-5:1996
01-maj-1996
Hand crimping tools - Tools for the crimp termination of electric cables and wires
for low frequency and radio frequency applications - Part 2-5: Particular
requirements for the termination of twin-ax cable for databus application
Hand crimping tools - Tools for the crimp termination of electric cables and wires for low
frequency and radio frequency applications -- Part 2-5: Particular requirements for the
termination of twin-ax cable for databus applications
Handcrimpwerkzeuge - Werkzeuge für den Crimpanschluß von elektrischen Leitungen
und Drähten für Niederfrequenz- und für Hochfrequenzanwendungen -- Teil 2-5:
Spezielle Anforderungen für den Anschluß von Kabeln mit zwei Innenleitern für
Datenbusanwendungen
Outils de sertissage manuels - Outils pour sertir les câbles et fils électriques basse
fréquence et radio-fréquence -- Partie 2-5: Sortie de câble 'twin-ax' pour applications bus
de données
Ta slovenski standard je istoveten z: EN 50109-2-5:1995
ICS:
25.140.30 2URGMD]DURþQRXSRUDER Hand-operated tools
SIST EN 50109-2-5:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50109-2-5:1996

---------------------- Page: 2 ----------------------

SIST EN 50109-2-5:1996

---------------------- Page: 3 ----------------------

SIST EN 50109-2-5:1996

--
...