EN 50109-2-5:1995

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications

Part 2-5 of this European Standard specifies detail requirements for hand crimping tools incorporating a system of multiple indentors for use with Databus contacts of electrical connectors and similar components. Two tools are covered, as follows: a tool for contacts with crimp barrel size 22 (tool reference EN 50109-2-5-001), see clause 5; a tool for contacts with crimp barrel size 20 (tool reference EN 50109-2-5-002), see clause 5. It includes requirements for crimped joints made with the tools

Handcrimpwerkzeuge - Werkzeuge für den Crimpanschluß von elektrischen Leitungen und Drähten für Niederfrequenz- und für Hochfrequenzanwendungen - Teil 2-5: Spezielle Anforderungen für den Anschluß von Kabeln mit zwei Innenleitern für Datenbusanwendungen

Outils de sertissage manuels - Outils pour sertir les câbles et fils électriques basse fréquence et radio-fréquence - Partie 2-5: Sortie de câble 'twin-ax' pour applications bus de données

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus application

General Information

• Status: Published
• Publication Date: 21-Jun-1995
• Withdrawal Date: 14-Dec-1995
• Technical Committee: CLC/TC 46X - Communication cables
• Drafting Committee: CLC/SC 46XC - Multicore, Multipair and Quad Data communication cables
• Parallel Committee: IEC/TC 46 - IEC_TC_46
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Jun-1995
• Completion Date: 22-Jun-1995
• Ref Project: SIST EN 50109-2-5:1996 - Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications -- Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications

Overview

EN 50109-2-5:1995 (adopted as SIST EN 50109-2-5:1996 by CLC) is a European standard that defines particular requirements for hand crimping tools used to terminate twin-ax cable for databus applications. The document covers hand-operated crimp tools that use a system of multiple indentors and specifies the two tool variants by crimp barrel size: size 22 (EN 50109-2-5-001) and size 20 (EN 50109-2-5-002). It also includes requirements for the resulting crimped joints produced with these tools.

Key topics and technical requirements

• Scope of tools: Requirements for hand crimping tools designed specifically for twin-ax/databus contacts and similar connector components.
• Tool variants: Detailed coverage of two reference designs-crimp barrel size 22 and crimp barrel size 20 (tool references EN 50109-2-5-001 and EN 50109-2-5-002).
• Multiple indentor systems: Specification focuses on tools incorporating multiple indentors to form the crimp profile required by Databus contacts.
• Crimped joint requirements: The standard sets acceptance criteria and characteristics that crimped joints must meet when produced using the specified tools (mechanical and assembly quality expectations).
• Conformity and procurement: Practical dimensions for specifying compliant tools and joints in purchasing documentation and design specifications.

(Note: the standard text should be consulted for precise dimensions, testing methods and acceptance criteria.)

Applications

• Termination of twin-ax cable in databus systems for low-frequency and radio-frequency applications.
• Use in component assembly and harness manufacture where consistent, reliable crimped joints are required for signal integrity.
• Suitable for tool manufacturers, connector/cable assemblers, quality and test engineers who need to ensure compatible tooling and repeatable crimps.

Who should use this standard

• Tool designers and manufacturers developing hand crimping tools for databus connectors.
• Cable-assembly shops and harness manufacturers procuring tools or specifying crimp quality.
• Quality assurance and test laboratories that validate crimped joint performance.
• Procurement and engineering teams writing technical specifications for databus interconnects.

Related standards

• EN 50109 series (hand crimping tools for low- and radio-frequency applications) - EN 50109-2-5 is a part addressing twin-ax/databus terminations.
• Connector and contact manufacturers’ datasheets and general crimping standards should be consulted alongside EN 50109-2-5 for full implementation.

Keywords: hand crimping tools, twin-ax cable, databus, crimp termination, EN 50109-2-5, crimp barrel size 22, crimp barrel size 20, multiple indentors, crimped joints.

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-1996
Hand crimping tools - Tools for the crimp termination of electric cables and wires
for low frequency and radio frequency applications - Part 2-5: Particular
requirements for the termination of twin-ax cable for databus application
Hand crimping tools - Tools for the crimp termination of electric cables and wires for low
frequency and radio frequency applications -- Part 2-5: Particular requirements for the
termination of twin-ax cable for databus applications
Handcrimpwerkzeuge - Werkzeuge für den Crimpanschluß von elektrischen Leitungen
und Drähten für Niederfrequenz- und für Hochfrequenzanwendungen -- Teil 2-5:
Spezielle Anforderungen für den Anschluß von Kabeln mit zwei Innenleitern für
Datenbusanwendungen
Outils de sertissage manuels - Outils pour sertir les câbles et fils électriques basse
fréquence et radio-fréquence -- Partie 2-5: Sortie de câble 'twin-ax' pour applications bus
de données
Ta slovenski standard je istoveten z: EN 50109-2-5:1995
ICS:
25.140.30 2URGMD]DURþQRXSRUDER Hand-operated tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

--
...