SIST EN ISO 22042:2021/A1:2024
(Amendment)Blast chiller and freezer cabinets for professional use - Classification, requirements and test conditions - Amendment 1 (ISO 22042:2021/Amd 1:2024)
Blast chiller and freezer cabinets for professional use - Classification, requirements and test conditions - Amendment 1 (ISO 22042:2021/Amd 1:2024)
Schnellkühl- und Schockfrostkabinen für den gewerblichen Gebrauch - Klassifizierung, Anforderungen und Prüfbedingungen - Änderung 1 (ISO 22042:2021/Amd 1:2024)
Cellules de refroidissement et de surgélation rapide pour usage professionnel - Classification, exigences et conditions d'essai - Amendement 1 (ISO 22042:2021/Amd 1:2024)
Hladilniki in zamrzovalne omare za poklicno uporabo - Razvrstitev, zahteve in preskusni pogoji - Dopolnilo A1 (ISO 22042:2021/Amd 1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22042:2021/oprA1:2022
01-september-2022
Hladilniki in zamrzovalne omare za poklicno uporabo - Razvrstitev, zahteve in
preskusni pogoji - Dopolnilo A1 (ISO 22042:2021/DAM 1:2022)
Blast chiller and freezer cabinets for professional use - Classification, requirements and
test conditions - Amendment 1 (ISO 22042:2021/DAM 1:2022)
Cellules de refroidissement et de surgélation rapide pour usage professionnel -
Classification, exigences et conditions d'essai - Amendement 1 (ISO 22042:2021/DAM
1:2022)
Ta slovenski standard je istoveten z: EN ISO 22042:2021/prA1
ICS:
97.130.20 Hladilne naprave za trgovine Commercial refrigerating
appliances
SIST EN ISO 22042:2021/oprA1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22042:2021/oprA1:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 22042:2021/oprA1:2022
DRAFT AMENDMENT
ISO 22042:2021/DAM 1
ISO/TC 86/SC 7 Secretariat: UNI
Voting begins on: Voting terminates on:
2022-05-31 2022-08-23
Blast chiller and freezer cabinets for professional use —
Classification, requirements and test conditions
AMENDMENT 1
Cellules de refroidissement et de surgélation rapide pour usage professionnel — Classification, exigences et
conditions d'essai
AMENDEMENT 1
ICS: 97.130.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 22042:2021/DAM 1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
SIST EN ISO 22042:2021/oprA1:2022
ISO 22042:2021/DAM 1:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 22042:2021/oprA1:2022
ISO 22042:2021/DAM 1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.