SIST EN 17032:2018/A1:2019
(Amendment)Blast chillers and freezers cabinets for professional use - Classification, requirements and test conditions
Blast chillers and freezers cabinets for professional use - Classification, requirements and test conditions
Schnellkühl- und Schockfrostkabinen für den gewerblichen Gebrauch - Klassifizierung, Anforderungen und Prüfbedingungen
Cellules de refroidissement et congélateurs pour usage professionnel - Classification, exigences et conditions d'essai
Hladilniki in zamrzovalne omare za profesionalno uporabo - Razvrstitev, zahteve in preskusni pogoji - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17032:2018/A1:2019
01-junij-2019
Hladilniki in zamrzovalne omare za profesionalno uporabo - Razvrstitev, zahteve in
preskusni pogoji - Dopolnilo A1
Blast chillers and freezers cabinets for professional use - Classification, requirements
and test conditions
Schnellkühl- und Schockfrostkabinen für den gewerblichen Gebrauch - Klassifizierung,
Anforderungen und Prüfbedingungen
Cellules de refroidissement et congélateurs pour usage professionnel - Classification,
exigences et conditions d'essai
Ta slovenski standard je istoveten z: EN 17032:2018/A1:2019
ICS:
97.130.20 Hladilne naprave za trgovine Commercial refrigerating
appliances
SIST EN 17032:2018/A1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17032:2018/A1:2019
---------------------- Page: 2 ----------------------
SIST EN 17032:2018/A1:2019
EN 17032:2018/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2019
EUROPÄISCHE NORM
ICS 97.130.20
English Version
Blast chillers and freezers cabinets for professional use -
Classification, requirements and test conditions
Cellules de refroidissement et congélateurs pour usage Schnellkühl- und Schockfrostkabinen für den
professionnel - Classification, exigences et conditions gewerblichen Gebrauch - Klassifizierung,
d'essai Anforderungen und Prüfbedingungen
This amendment A1 modifies the European Standard EN 17032:2018; it was approved by CEN on 27 November 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17032:2018/A1:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17032:2018/A1:2019
EN 17032:2018/A1:2019 (E)
European foreword
This document (EN 17032:2018/A1:2019) has been prepared by Technical Committee CEN/TC 44
“Commercial and Professional Refrigerating Appliances and Systems, Performance and Energy
Consumption", the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2019, and conflicting national standards shall
be withdrawn at the latest by October 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
2
---------------------- Page: 4 ----------------------
SIST EN 17032:2018/A1:2019
EN 17032:2018/A1:2019 (E)
1 Modification of Annex ZA
Replace Annex ZA with the following new Annex ZA:
"
Annex ZA
(informative)
Relationship between this European Standard and the ecodesign
requirements of Commission Regulation (EU) No 2015/1095 aimed t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.