Designation of phase differences by hour numbers in three-phase AC systems (IEC 60152:2021)

This document specifies methods and rules for the designation of phase difference between two items in a three-phase AC system. The designations are intended to be applied in the technical documentation of industrial installations, equipment and products, and also on markings of equipment and products.

Kennzeichnung der Phasenleiter in einem elektrischen Dreiphasensystem durch Uhrziffern (IEC 60152:2021)

Désignation des déphasages par indices horaires des réseaux en courant alternatif triphasés (IEC 60152:2021)

L'IEC 61052:2021 spécifie les méthodes et les règles en vue de la désignation du déphasage entre deux entités dans un réseau en courant alternatif triphasé. Les désignations sont destinées à figurer dans la documentation technique des installations, matériels et produits industriels, ainsi que sur les marquages des matériels et produits. L'IEC 61052:2021 annule et remplace la 1re édition parue en 1963. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) le titre a été mis à jour en vue de refléter le contenu du nouveau document; b) le concept d'identification des conducteurs par indices horaires a été supprimé, car il est considéré comme dépassé et qu’il existe d'autres moyens d'identification des conducteurs; c) la définition de l’indice horaire (indice d’horloge) et celle du déphasage ont été ajoutées.

Označevanje faznih vodnikov po časovnih indeksih (po urah) trifaznih omrežij z izmeničnim tokom (IEC 60152:2021)

General Information

Status
Published
Public Enquiry End Date
24-Jan-2021
Publication Date
11-Oct-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
07-Sep-2021
Due Date
12-Nov-2021
Completion Date
12-Oct-2021

Buy Standard

Standard
SIST EN IEC 60152:2021
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
oSIST prEN IEC 60152:2021
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 60152:2021
01-november-2021
Označevanje faznih vodnikov po časovnih indeksih (po urah) trifaznih omrežij z
izmeničnim tokom (IEC 60152:2021)
Designation of phase differences by hour numbers in three-phase AC systems (IEC
60152:2021)
Kennzeichnung der Phasenleiter in einem elektrischen Dreiphasensystem durch
Uhrziffern (IEC 60152:2021)

Désignation des déphasages par indices horaires des réseaux en courant alternatif

triphasés (IEC 60152:2021)
Ta slovenski standard je istoveten z: EN IEC 60152:2021
ICS:
29.020 Elektrotehnika na splošno Electrical engineering in
general
SIST EN IEC 60152:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60152:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 60152:2021
EUROPEAN STANDARD EN IEC 60152
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2021
ICS 29.020
English Version
Designation of phase differences by hour numbers in three-
phase AC systems
(IEC 60152:2021)

Désignation des déphasages par indices horaires des Kennzeichnung der Phasenleiter in einem elektrischen

réseaux en courant alternatif triphasés Dreiphasensystem durch Uhrziffern
(IEC 60152:2021) (IEC 60152:2021)

This European Standard was approved by CENELEC on 2021-08-13. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 60152:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60152:2021
EN IEC 60152:2021 (E)
European foreword

The text of document 3/1490/FDIS, future edition 2 of IEC 60152, prepared by IEC/TC 3

“Documentation, graphical symbols and representations of technical information” was submitted to the

IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60152:2021.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2022–05–13

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2024–08–13

document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Any feedback and questions on this document should be directed to the users’ national committee. A

complete listing of these bodies can be found on the CENELEC website.
Endorsement notice

The text of the International Standard IEC 60152:2021 was approved by CENELEC as a European

Standard without any modification.
---------------------- Page: 4 ----------------------
SIST EN IEC 60152:2021
IEC 60152
Edition 2.0 2021-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
HORIZONTAL PUBLICATION
PUBLICATION HORIZONTALE
Designation of phase differences by hour numbers in three-phase AC systems
Désignation des déphasages par indices horaires des réseaux en courant
alternatif triphasés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.020 ISBN 978-2-8322-9920-3

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 5 ----------------------
SIST EN IEC 60152:2021
– 2 – IEC 60152:2021 © IEC 2021
CONTENTS

FOREWORD ........................................................................................................................... 3

1 Scope .............................................................................................................................. 5

2 Normative references ...................................................................................................... 5

3 Terms and definitions ...................................................................................................... 5

4 Hour numbers .................................................................................................................. 5

5 Phase difference ............................................................................................................. 6

Figure 1 – Illustration of hour number for three-phase transformer Dy11 ................................. 6

Figure 2 – Examples of hour numbers representing phase differences .................................... 7

---------------------- Page: 6 ----------------------
SIST EN IEC 60152:2021
IEC 60152:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DESIGNATION OF PHASE DIFFERENCES BY
HOUR NUMBERS IN THREE-PHASE AC SYSTEMS
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their

preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

may participate in this preparatory work. International, governmental and non-governmental organizations liaising

with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While
...

SLOVENSKI STANDARD
oSIST prEN IEC 60152:2021
01-januar-2021
Identifikacija vodnikov trifaznih omrežij po urnih indeksih

Identification by hour numbers of the phase conductors of 3-phase electric systems

Repérage par indices horaires des conducteurs des réseaux triphasés
Ta slovenski standard je istoveten z: prEN IEC 60152:2020
ICS:
29.020 Elektrotehnika na splošno Electrical engineering in
general
oSIST prEN IEC 60152:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60152:2021
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60152:2021
3/1459/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60152 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2020-11-06 2021-01-29
SUPERSEDES DOCUMENTS:
3/1446/CD, 3/1458/CC

IEC TC 3 : DOCUMENTATION, GRAPHICAL SYMBOLS AND REPRESENTATIONS OF TECHNICAL INFORMATION

SECRETARIAT: SECRETARY:
Sweden Mr Thomas Borglin
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 2,SC 3C,SC 3D,TC 9,TC 14,TC 23,SC
23G,TC 38,TC 61,SC 61B,SC 61C,SC 61D,SC
Other TC/SCs are requested to indicate their interest, if
61H,TC 62
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING

Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.

Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of

which they are aware and to provide supporting documentation.
TITLE:

Identification by hour numbers of the phase conductors of 3-phase electric systems

PROPOSED STABILITY DATE: 2030
NOTE FROM TC/SC OFFICERS:

This CDV is developed in response to the decision no. 15 of the TC 3 meeting in Shanghai, China,

2019-10-24/25.

Copyright © 2020 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this

electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.

You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without

permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60152:2021
3/1459/CDV – 2 – IEC CD 60152  IEC:2020
2 CONTENTS

4 FOREWORD ........................................................................................................................... 3

5 1 Scope .............................................................................................................................. 5

6 2 Normative references ...................................................................................................... 5

7 3 Terms and definitions ...................................................................................................... 5

8 4 Hour numbers .................................................................................................................. 5

9 5 Phase difference ............................................................................................................. 6

11 Figure 1 – Illustration of hour number for three-phase transformer Dy11 ................................. 6

12 Figure 2 – Examples of hour numbers representing phase differences .................................... 6

---------------------- Page: 4 ----------------------
oSIST prEN IEC 60152:2021
IEC CD 60152  IEC:2020 – 3 – 3/1459/CDV
18 INTERNATIONAL ELECTROTECHNICAL COMMISSION
19 ____________
21 DESIGNATION OF PHASE DIFFERENCES BY HOUR NUMBERS IN
22 THREE-PHASE AC SYSTEMS
25 FOREWORD

26 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

27 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

28 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

29 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

30 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their

31 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

32 may participate in this preparatory work. International, governmental and non-governmental organizations liaising

33 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

34 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

35 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

36 consensus of opinion on the relevant subjects since each technical committee has representation from all

37 interested IEC National Committees.

38 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

39 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

40 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

41 misinterpretation by any end user.

42 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

43 transparently to the maximum extent possible in their national and regional publications. Any divergence between

44 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

45 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

46 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

47 services carried out by independent certification bodies.

48 6) All users should ensure that they have the latest edition of this publication.

49 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

50 members of its technical committees and IEC National Committees for any personal injury, property damage or

51 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

52 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

53 Publications.

54 8) Attention is drawn to the Normative references cited in this publication. Use of the referen

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.