iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 760:1996

(Main)

Welding consumables - Fluxes for submerged arc welding - Classification

Welding consumables - Fluxes for submerged arc welding - Classification

This standard applies to fluxes for the submerged arc welding of non alloyed, low alloy and high alloy steels such as stainless and heat resisting steels and of nickel and nickel alloys using wire electrodes and strip electrodes.

Schweißzusätze - Pulver zum Unterpulverschweißen - Einteilung

Diese Norm gilt für Schweißpulver zum Unterpulverschweißen mit Draht- und Bandelektroden von unlegierten, niedriglegierten und hochlegierten nichtrostenden und hitzebeständigen Stählen sowie von Nickel und Nickellegierungen.

Produits consommables pour le soudage - Flux pour le soudage a l'arc sous flux - Classification

La présente norme s'applique aux flux pour le soudage a l'arc sous flux des aciers non alliés, faiblement alliés et fortement alliés tels que les aciers inoxydables et les aciers réfractaires, du nickel et des alliages de nickel au moyen d'électrodes sous forme de fils et de feuillards.

Dodajni materiali za varjenje - Varilni praški za varjenje pod praškom - Razvrstitev

General Information

Status
Withdrawn
Publication Date
31-Oct-1996
Withdrawal Date
27-Mar-2012
ICS
25.160.20 - Welding consumables
Technical Committee
VAR - Welding
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
26-Mar-2012
Due Date
18-Apr-2012
Completion Date
28-Mar-2012
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN 760:1996 - Welding consumables - Fluxes for submerged arc welding - Classification

Relations

Replaced By
SIST EN ISO 14174:2012 - Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012)
Effective Date
01-May-2012

Buy Standard

EN 760:1996EN 760:1996
PreviousNext
Standard + National Annex and/or Foreword
EN 760:1996
Foreword and/or annex in Slovenian language, body of the standard in German language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 14172:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2023)
EN ISO 14172:2023
  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18274:2023(Main)
Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2023)
EN ISO 18274:2023

This document specifies requirements for classification of solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. The classification of the solid wire electrodes, solid strip electrodes, solid wires and solid rods is based on their chemical composition. It includes those compositions in which the nickel content exceeds that of any other element.
The principles of this document can be applied to metal powders for cladding, hard facing and additive manufacturing.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14700:2023(Main)
Welding consumables - Welding consumables for hard-facing
EN 14700:2022

This European Standard applies to welding consumables for hardfacing. The range of application includes surfaces of new structural components, semi-finished products as well as repair of surfaces of structural components which have to resist to mechanical, chemical, thermal or combined stress.
This European Standard specifies requirements for classification of the consumables based on their chemical composition of the all weld metal of covered electrodes, cored wires, cored rods, cored strips, sintered strips, sintered rods and metal powders and on the chemical composition of solid wires, solid rods, solid strips and cast rods.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12153:2023(Main)
Welding consumables - Tubular-cored electrodes for gas-shielded and non-gas-shielded metal arc welding of nickel and nickel alloys - Classification (ISO 12153:2022)
EN ISO 12153:2022

This document specifies requirements for the classification of tubular-cored electrodes for metal arc welding with or without a gas shield of nickel and nickel alloys. It includes those compositions in which the nickel content exceeds that of any other element.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8167:2021(Main)
Resistance welding - Embossed projection welding - Projections for resistance welding (ISO 8167:2021)
EN ISO 8167:2021

This document specifies the geometries and dimensions of projections for embossed projection welding.
Tools to make the projections are also included in Annex B.
The projections are used on hot-rolled, cold-rolled, uncoated and coated steels, stainless steels and
nickel alloys for conventional welding quality up to 3 mm thickness, as single projections, in multiples
or as a group of multiples.
Any solid projections are not included in this document.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17633:2018/A1:2021(Amendment)
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification - Amendment 1 (ISO 17633:2017/Amd 1:2021)
EN ISO 17633:2018/A1:2021
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN ISO/TR 20172:2021(Main)
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
CEN ISO/TR 20172:2021

This document establishes a European grouping system for materials for welding purposes, classified
in accordance with the grouping system of ISO/TR 15608.
It is also applicable for other purposes such as heat treatment, forming and non-destructive testing.
This document covers grouping systems for the following standardized materials:
a) steel;
b) aluminium and its alloys;
c) copper and its alloys;
d) cast irons;
e) nickel and nickel alloys.
For materials that are not assigned to a group in this document, the criteria of ISO/TR 15608 apply.

  • Technical report
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20168:2021(Main)
Resistance welding - Locking tapers for electrode holders and electrode caps (ISO 20168:2016)
EN ISO 20168:2021

ISO 20168:2016 specifies the dimensions and tolerances for electrode holders and of spot welding electrode caps, where a locking taper is used.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14341:2020(Main)
Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2020)
EN ISO 14341:2020

This document specifies requirements for classification of wire electrodes and weld deposits in the
as-welded condition and in the post-weld heat-treated condition for gas shielded metal arc welding of
non alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile
strength of up to 570 MPa. One wire electrode can be tested and classified with different shielding gases.
This document constitutes a combined specification providing classification utilizing a system based
upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system
based upon the tensile strength and the average impact energy of 27 J of all-weld metal.
a) Clauses and tables which carry the suffix letter “A” are applicable only to wire electrodes classified
to the system based on the yield strength and the average impact energy of 47 J of all-weld metal in
accordance with this document.
b) Clauses and tables which carry the suffix letter “B” are applicable only to wire electrodes classified
to the system based on the tensile strength and the average impact energy of 27 J of all-weld metal
in accordance with this document.
c) Clauses and tables which have neither the suffix letter “A” nor the suffix letter “B” are applicable to
all wire electrodes classified in accordance with this document.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 24034:2020(Main)
Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020)
EN ISO 24034:2020

This document specifies requirements for the classification of solid wire electrodes, solid wires and
rods for fusion welding of titanium and titanium alloys. The classification is based on their chemical
composition.
The compositions of solid wire electrodes for metal inert gas (MIG) welding are the same as solid wire
electrodes, solid wires and rods for tungsten inert gas (TIG) arc welding, plasma arc welding, laser
beam welding, and other fusion welding processes.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day