SIST EN 13223:2015/oprA1:2020

Safety requirements for cableway installations designed to carry persons - Drive systems and other technical requirements

- The scope of the standard to be amended is:
This European  Standard  specifies  safety  requirements  for  the  mechanical  and  electrical  devices  of  the  drive  
system  and  other  mechanical  devices  for  cableway  installations  designed  to  carry  persons.  This  standard  is  
applicable to the various types of installations and takes into account their environment.
This European  Standard applies  to  the  design,  manufacture,  installation, maintenance  and  operation  of  the  
mechanical and electrical devices of the drive system and other mechanical devices for cableway installations
designed to carry persons.
It  includes  requirements  concerning  the  prevention  of  accidents  and  the  protection  of  workers  without  
prejudice to the application of national regulations.
National  regulations  regarding building  or  construction or  that  are  designed  to  protect  particular  groups  of  people, remain unaffected. It does not apply to installations for the transportation of goods, or to lifts.
Clauses 6 to 11 apply to the mechanical and electrical devices of the drive system.
Clauses 12 to 20 apply to other mechanical devices.
- The scope of the proposed amendment A1 on this standard is to modify Article 9.10 on Safety break in order to be in line with the text of the regulation 424/2016

Sicherheitsanforderungen an Seilbahnen für die Personenbeförderung - Antriebe und mechanische Einrichtungen

Prescriptions de sécurité pour les installations à câbles destinées à transporter des personnes - Entrainements et autres dispositifs mécaniques

...

Varnostne zahteve za žičniške naprave za prevoz oseb - Pogonski sistemi in druga tehnična oprema

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Dec-2020
• ICS: 45.100 - Cableway equipment
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 03-Aug-2022
• Due Date: 21-Sep-2022
• Directive: 2016/424 - Regulation (EU) 2016/424 of the European Parliament and of the Council of 9 March 2016 on cableway installations and repealing Directive 2000/9/EC
• Mandate: M/300 - Mandate for standardisation addressed to CEN, CENELEC and ETSI in the field of Cableway installations designed to carry persons
• Ref Project: EN 13223:2015/FprA1 - Safety requirements for cableway installations designed to carry persons - Drive systems and other technical equipment

RELATIONS

• Amends: SIST EN 13223:2015 - Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
• Effective Date: 06-Nov-2019

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 13223:2015/oprA1:2020
01-december-2020
Varnostne zahteve za žičniške naprave za prevoz oseb - Pogonski sistemi in druga
tehnična oprema

Safety requirements for cableway installations designed to carry persons - Drive systems

and other technical requirements

Sicherheitsanforderungen an Seilbahnen für die Personenbeförderung - Antriebe und

mechanische Einrichtungen

Prescriptions de sécurité pour les installations à câbles destinées à transporter des

personnes - Entrainements et autres dispositifs mécaniques
Ta slovenski standard je istoveten z: EN 13223:2015/prA1
ICS:
45.100 Oprema za žičnice Cableway equipment
SIST EN 13223:2015/oprA1:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13223:2015/oprA1:2020
---------------------- Page: 2 ----------------------
SIST EN 13223:2015/oprA1:2020
DRAFT
EUROPEAN STANDARD
EN 13223:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
October 2020
ICS 45.100
English Version
Safety requirements for cableway installations designed to
carry persons - Drive systems and other technical
requirements

Prescriptions de sécurité pour les installations à câbles Sicherheitsanforderungen an Seilbahnen für die

destinées à transporter des personnes - Entrainements Personenbeförderung - Antriebe und mechanische

et autres dispositifs mécaniques Einrichtungen

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 242.

This draft amendment A1, if approved, will modify the European Standard EN 13223:2015. If this draft becomes an amendment,

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13223:2015/prA1:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13223:2015/oprA1:2020
EN 13223:2015/prA1:2020 (E)
Contents Page

1 Amendments to the foreword ..................................................................................................................... 3

2 Amendment to 9.10, Safety brake ............................................................................................................. 4

3 Amendments to Appendix ZA ..................................................................................................................... 4

Anhang ZA (informative) Relationship between this European Standard and the

fundamental requirements of the regulation covered, Regulation (EU) 2016/424 ............... 5

---------------------- Page: 4 ----------------------
SIST EN 13223:2015/oprA1:2020
EN 13223:2015/prA1:2020 (E)
1 Amendments to the foreword
The first four paragraphs are amended as follows:

This document (EN 13223:2015/prA1:2020) was prepared by Technical Committee CEN/TC 242 "Safety

requirements for cableway installations designed to carry persons", the secretariat of which is held by

AFNOR (Association Française de Normalisation — the French national organisation for standardisation).

This document has been submitted for the purposes of the CEN (Comité Européen de Normalisation —

European Committee for Standardization) enquiry.

This document was prepared under a mandate given to the CEN by the European Commission and the

European Free Trade Association (EFTA) and facilitates the fundamental requirements of Regulation

(EU) 2016/424.

For the context of Regulation (EU) 2016/424 see informative Appendix ZA, which forms an integral

part of this document."
Replace paragraphs 8 and 9 with:
"This European stan
...