SIST EN IEC 61969-3:2024
(Main)Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects (IEC 61969-3:2023)
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects (IEC 61969-3:2023)
This part of IEC 61969 specifies a set of basic environmental requirements and tests, as well
as safety aspects for outdoor enclosures for electrical and electronic equipment, under
conditions of non-weatherprotected locations above ground.
The purpose of this document is to define a minimum level of environmental performance in
order to meet requirements of storage, transport and final installation. The intention is to
establish basic environmental performance criteria for outdoor enclosure compliance.
Mechanische Bauweisen für elektrische und elektronische Einrichtungen - Außengehäuse - Teil 3: Umgebungsanforderungen, Prüfungen und Sicherheitsaspekte (IEC 61969-3:2023)
Structures mécaniques pour équipement électrique et électronique - Enveloppes de plein air - Partie 3: Exigences et essais d'environnement, et aspects liés à la sécurité (IEC 61969-3:2023)
IEC 61969-3:2023 est disponible sous forme de IEC 61969-3:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L’IEC 61969:2023 spécifie un ensemble d’exigences et d’essais d’environnement de base, ainsi que les aspects liés à la sécurité relatifs aux enveloppes de plein air pour équipement électrique et électronique, placées dans les conditions d’emplacement non protégé contre les intempéries, au-dessus du sol. L’objet du présent document est de définir un niveau minimal de performances environnementales, afin de répondre aux exigences de stockage, de transport et d’installation finale. Il s’agit d’établir des critères de performances environnementales de base en vue de la conformité des enveloppes de plein air.
Mehanske strukture za električno in elektronsko opremo - Ohišja na prostem - 3. del: Okoljevarstvene zahteve, preskusi in varnostni vidiki (IEC 61969-3:2023)
Ta del standarda IEC 61969 določa niz osnovnih okoljevarstvenih zahtev in preskusov ter varnostne vidike za ohišja električne in elektronske opreme na prostem pod pogoji na lokacijah nad tlemi, ki niso zaščitene pred vremenskimi vplivi.
Namen tega dokumenta je opredeliti najmanjšo raven okoljevarstvenih zmogljivosti za izpolnjevanje zahtev v zvezi s pogoji shranjevanja, transporta in končne namestitve. Namen je vzpostaviti osnovne kriterije okoljevarstvene zmogljivosti za skladnost ohišij na prostem.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61969-3:2024
01-marec-2024
Mehanske strukture za električno in elektronsko opremo - Ohišja na prostem - 3.
del: Okoljevarstvene zahteve, preskusi in varnostni vidiki (IEC 61969-3:2023)
Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part
3: Environmental requirements, tests and safety aspects (IEC 61969-3:2023)
Mechanische Bauweisen für elektrische und elektronische Einrichtungen -
Außengehäuse - Teil 3: Umgebungsanforderungen, Prüfungen und Sicherheitsaspekte
(IEC 61969-3:2023)
Structures mécaniques pour équipement électrique et électronique - Enveloppes de plein
air - Partie 3: Exigences et essais d'environnement, et aspects liés à la sécurité (IEC
61969-3:2023)
Ta slovenski standard je istoveten z: EN IEC 61969-3:2024
ICS:
31.240 Mehanske konstrukcije za Mechanical structures for
elektronsko opremo electronic equipment
SIST EN IEC 61969-3:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61969-3:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 61969-3:2024
EUROPEAN STANDARD EN IEC 61969-3
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2024
ICS 31.240 Supersedes EN IEC 61969-3:2020
English Version
Mechanical structures for electrical and electronic equipment -
Outdoor enclosures - Part 3: Environmental requirements, tests
and safety aspects
(IEC 61969-3:2023)
Structures mécaniques pour équipement électrique et Mechanische Bauweisen für elektrische und elektronische
électronique - Enveloppes de plein air - Partie 3: Exigences Einrichtungen - Außengehäuse - Teil 3:
et essais d'environnement, et aspects liés à la sécurité Umgebungsanforderungen, Prüfungen und
(IEC 61969-3:2023) Sicherheitsaspekte
(IEC 61969-3:2023)
This European Standard was approved by CENELEC on 2023-12-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61969-3:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61969-3:2024
EN IEC 61969-3:2024 (E)
European foreword
The text of document 48D/765/FDIS, future edition 4 of IEC 61969-3, prepared by SC 48D
"Mechanical structures for electrical and electronic equipment" of IEC/TC 48 "Electrical connectors
and mechanical structures for electrical and electronic equipment" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 61969-3:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-12-25
document have to be withdrawn
This document supersedes EN IEC 61969-3:2020 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61969-3:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60068-2-5 NO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.