iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 771-2:2000

(Main)

Specification for masonry units - Part 2: Calcium silicate masonry units

Specification for masonry units - Part 2: Calcium silicate masonry units

This European Standard specifies the characteristics and performance requirements of calcium silicate masonry units for which the main intended uses are inner walls, outer walls, cellars, foundations and chimneys, including those of an overall non-rectangular parallelepiped shape, specially shaped and accessory units. This European Standard is intended to apply to all calcium silicate masonry units. This European Standard does not cover units with more than 60% volume of voids. This European Standard does not cover products made from shale as a major raw material.

Festlegungen für Mauersteine - Teil 2: Kalksandsteine

Diese Europäische Norm gilt für Kalksandsteine. Sie beschreibt deren Eigenschaften und die an diese Mauersteine gestellten Anforderungen. Kalksand- steine werden vorwiegend zur Herstellung von Innenwänden, Außenwänden, Kellern, Gründungen und Schornsteinen verwendet. Diese Norm enthält auch Angaben zu Form- und Ergänzungssteinen. Diese Europäische Norm gilt nicht für Kalksandsteine mit einem Lochanteil von mehr als 60%.

Spécifications pour éléments de maçonnerie - Partie 2: Eléments de maçonnerie en silico-calcaire

La présente Norme Européenne spécifie les caractéristiques et les prescriptions de performances des éléments de maçonnerie silico-calcaires dont les utilisations principales prévues sont les murs intérieurs, les murs extérieurs, les caves et les conduits de fumée, y compris ceux dont la forme n'est pas un parallélépipede rectangle, ceux ayant une forme spéciale et les éléments accessoires. La présente Norme Européenne est destinée a s'appliquer a tous les éléments de maçonnerie silico-calcaires. La présente Norme Européenne ne couvre pas les éléments de maçonnerie ayant un volume de vides supérieur a 60%.

Specifikacije za zidake - 2. del: Apneno peščeni zidaki

General Information

Status
Withdrawn
Publication Date
31-Aug-2000
Withdrawal Date
31-Dec-2003
ICS
91.100.15 - Mineral materials and products
Technical Committee
CAA - Mineral binders and masonry
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jan-2004
Due Date
01-Jan-2004
Completion Date
01-Jan-2004
Directive
89/106/EEC - Construction products
Mandate
M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
Ref Project
EN 771-2:2000 - Specification for masonry units - Part 2: Calcium silicate masonry units

Relations

Replaced By
SIST EN 771-2:2004 - Specification for masonry units - Part 2: Calcium silicate masonry units
Effective Date
01-Jan-2004

Buy Standard

EN 771-2:2000EN 771-2:2000
PreviousNext
Standard
EN 771-2:2000
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 771-2:2000
01-september-2000
6SHFLILNDFLMH]D]LGDNHGHO$SQHQRSHãþHQL]LGDNL
Specification for masonry units - Part 2: Calcium silicate masonry units
Festlegungen für Mauersteine - Teil 2: Kalksandsteine
Spécifications pour éléments de maçonnerie - Partie 2: Eléments de maçonnerie en
silico-calcaire
Ta slovenski standard je istoveten z: EN 771-2:2000
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST EN 771-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 771-2:2000

---------------------- Page: 2 ----------------------

SIST EN 771-2:2000

---------------------- Page: 3 ----------------------

SIST EN 771-2:2000

---------------------- Page: 4 ----------------------

SIST EN 771-2:2000

---------------------- Page: 5 ----------------------

SIST EN 771-2:2000

---------------------- Page: 6 ----------------------

SIST EN 771-2:2000

---------------------- Page: 7 ----------------------

SIST EN 771-2:2000

---------------------- Page: 8 ----------------------

SIST EN 771-2:2000

---------------------- Page: 9 ----------------------

SIST EN 771-2:2000

---------------------- Page: 10 ----------------------

SIST EN 771-2:2000

---------------------- Page: 11 --------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 772-1:2011+A1:2015(Main)
Methods of test for masonry units - Part 1: Determination of compressive strength
EN 772-1:2011+A1:2015

This European Standard specifies a method for determining the compressive strength of masonry units.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 771-2:2011+A1:2015(Main)
Specification for masonry units - Part 2: Calcium silicate masonry units
EN 771-2:2011+A1:2015

This European Standard specifies the characteristics and performance requirements of calcium silicate masonry units for which the main intended uses are inner walls, outer walls, cellars, foundations and external chimney masonry.
This European Standard is intended to apply to all calcium silicate masonry units, including those of an overall nonrectangular parallelepiped shape, specially shaped and accessory units.
It defines the performance related to e.g. strength, density and dimensional accuracy, measured according to the corresponding test methods contained in separate European Standards.
It provides for the !assessment and verification of constancy of performance (AVCP)" of the product to this European Standard. The marking requirement for products covered by this document is also included.
This European Standard does not specify standard sizes for calcium silicate masonry units, nor standard work dimensions and angles of specially shaped and accessory units.
It does not cover units with more than 60 % volume of voids, nor products made from shale as a major raw material.
It does not cover storey height panels.
It does not cover units intended for use as a damp proof course, nor units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire, nor chimney flue units.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 771-6:2011+A1:2015(Main)
Specification for masonry units - Part 6: Natural stone masonry units
EN 771-6:2011+A1:2015

This European Standard specifies the characteristics and performance requirements of masonry units manufactured from natural stone the width of which is equal to or greater than 80 mm, for which the main intended uses are common, facing or exposed masonry units in loadbearing or non-loadbearing building and civil engineering applications These units are suitable for all forms of coursed or random masonry walling, including single leaf, cavity, partition, retaining and the external masonry to chimneys. They can provide fire protection, thermal insulation, sound insulation and sound absorption.
This European Standard includes natural stone masonry units of an overall non-rectangular parallelepiped shape, specially shaped and accessory units for internal and external application.
It defines the performance related to e.g. strength, petrographic description, density, porosity, dimensional accuracy, thermal conductivity, water absorption, and frost resistance and provides for the !assessment and verification of constancy of performance (AVCP)" of the product to this European Standard. The marking requirements for products covered by this European Standard are also included.
This European Standard does not cover storey height panels, natural stone for paving, chimney flue linings nor units intended for use as damp proof course.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 771-5:2011+A1:2015(Main)
Specification for masonry units - Part 5: Manufactured stone masonry units
EN 771-5:2011+A1:2015

This European Standard specifies the characteristics and performance requirements of manufactured stone masonry units for which the main intended uses are facing or exposed masonry in load bearing or non-load bearing building and civil engineering applications. The units are suitable for all forms of coursed or random masonry walling, including single leaf, cavity, partition, retaining and the external masonry to chimneys. They can provide fire protection, thermal insulation, sound insulation and sound absorption. This standard covers concrete masonry units manufactured to resemble natural stone using casting or pressing techniques with or without textured surfaces produced, by casting, splitting, washing, blasting or tooling and with or without variable outline effects. It covers homogeneous masonry units and those consisting of different facing and backing concrete mixes but excludes those manufactured with an adhesive bonded decorative face. This standard does not cover masonry units intended to conform to EN 771-3. It defines the performance related to e.g. strength, density, dimensional accuracy, surface appearance and provides for the evaluation of conformity of the product to this European Standard. The marking requirements for products covered by this European Standard are also included. This European Standard does not apply to storey height panels, masonry units used for chimney flues or units manufactured with an adhesive bonded decorative face. It does not include products intended to be used as a damp proof course nor does it specify standard sizes for manufactured stone masonry units or work dimensions and angles of specially shaped units. It does not cover units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 772-21:2011(Main)
Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption
EN 772-21:2011

This European Standard specifies a method of determining the water absorption of clay and calcium silicate masonry units by immersing them in cold water.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 772-11:2011(Main)
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
EN 772-11:2011

This European Standard specifies a method of determining the water absorption coefficient due to capillary action for aggregate concrete, autoclaved aerated concrete, natural stone and manufactured stone masonry units and the initial rate of water absorption for clay masonry units.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 772-16:2011(Main)
Methods of test for masonry units - Part 16: Determination of dimensions
EN 772-16:2011

This European Standard specifies a method of determining the overall dimensions, thickness and combined thickness of shells and webs, depth of voids and plane parallelism of the bed faces of masonry units.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 772-18:2011(Main)
Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units
EN 772-18:2011

This European Standard specifies a method of determining the freeze-thaw resistance of calcium silicate masonry units.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 772-2:1999/A1:2005(Amendment)
Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
EN 772-2:1998/A1:2005

2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 772-20:2000/A1:2005(Amendment)
Methods of test for masonry units - Part 20: Determination of flatness of faces of masonry units
EN 772-20:2000/A1:2005

2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day