oSIST prEN ISO 2417:2025

Leather - Physical and mechanical tests - Determination of the static absorption of water (ISO/DIS 2417:2024)

ISO 2417:2016 specifies a method for determining the water absorption of leather under static conditions. The method is applicable to all leather, particularly heavy leather.

Leder - Physikalische und mechanische Prüfungen - Bestimmung der statischen Wasseraufnahme (ISO/DIS 2417:2024)

Cuir - Essais physiques et mécaniques - Détermination de l'absorption statique d'eau (ISO/DIS 2417:2024)

ISO 2417:2016 spécifie une méthode permettant de déterminer l'absorption d'eau du cuir dans des conditions statiques. Cette méthode est applicable à tous les cuirs, notamment aux cuirs épais.

Usnje - Fizikalni in mehanski preskusi - Ugotavljanje statičnega vpijanja vode (ISO/DIS 2417:2024)

General Information

• Status: Not Published
• Public Enquiry End Date: 10-Mar-2025
• ICS: 59.140.30 - Leather and furs
• Technical Committee: IUSN - Leather
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 06-Jan-2025
• Due Date: 26-May-2025
• Ref Project: prEN ISO 2417 - Leather - Physical and mechanical tests - Determination of the static absorption of water (ISO/DIS 2417:2024)

Relations

• Revises: SIST EN ISO 2417:2016 - Leather - Physical and mechanical tests - Determination of the static absorption of water (ISO 2417:2016)
• Effective Date: 24-Apr-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2025
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje statičnega vpijanja vode
(ISO/DIS 2417:2024)
Leather - Physical and mechanical tests - Determination of the static absorption of water
(ISO/DIS 2417:2024)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der statischen
Wasseraufnahme (ISO/DIS 2417:2024)
Cuir - Essais physiques et mécaniques - Détermination de l'absorption statique d'eau
(ISO/DIS 2417:2024)
Ta slovenski standard je istoveten z: prEN ISO 2417
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 2417
IULTCS
IUP 7
IULTCS
Leather — Physical and mechanical
Secretariat: ISO
tests — Determination of the static
absorption of water
Voting begins on:
2024-12-17
Cuir — Essais physiques et mécaniques — Détermination de
Voting terminates on:
l'absorption statique d'eau
2025-03-11
ICS: 59.140.30
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference numbers
ISO/DIS 2417:2024(en)
IULTCS/IUP 7:2024(en)
DRAFT
ISO/DIS 2417:2024(en)
International
Standard
ISO/DIS 2417
IULTCS
IUP 7
IULTCS
Leather — Physical and mechanical
Secretariat: ISO
tests — Determination of the static
absorption of water
Voting begins on:
Cuir — Essais physiques et mécaniques — Détermination de
Voting terminates on:
l'absorption statique d'eau
ICS: 59.140.30
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail]
Website: www.iso.org
Reference numbers
Published in Switzerland ISO/DIS 2417:2024(en)
IULTCS/IUP 7:2024(en)
ii
ISO/DIS 2417:2024(en)
IULTCS/IUP 7:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Selection of leather specimen and test piece preparation . 2
7 Procedure . 2
8 Expression of results . 3
9 Test report . 3

iii
ISO/DIS 2417:2024(en)
IULTCS/IUP 7:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT)
see the following URL: Fore
...