iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60601-2-17:1998/A1:1998

(Amendment)

Medical electrical equipment -- Part 2: Particular requirements for the safety of remote-controlled automatically-driven gamma-ray after-loading equipment

Medical electrical equipment -- Part 2: Particular requirements for the safety of remote-controlled automatically-driven gamma-ray after-loading equipment

EN following parallel vote * Superseded by EN 60601-2-17:2004

Medizinische elektrische Geräte -- Teil 2: Besondere Festlegungen für die Sicherheit ferngesteuerter, automatisch betriebener Afterloading-Geräte für Gamma-Strahlung

Appareils électromédicaux -- Partie 2: Règles particulières de sécurité des appareils projecteurs de sources radioactives automatiques télécommandés utilisés en radiothérapie par rayonnement gamma

Medical electrical equipment - Part 2: Particular requirements for the safety of remote-controlled automatically-driven gamma-ray afterloading equipment - Amendment A1 (IEC 60601-2-17:1989/A1:1996)

General Information

Status
Withdrawn
Publication Date
31-Aug-1998
Withdrawal Date
17-Mar-2009
ICS
11.040.60 - Therapy equipment
Technical Committee
IEMO - Electrical equipment in medical practice
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
27-Feb-2009
Due Date
22-Mar-2009
Completion Date
18-Mar-2009
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
Ref Project
EN 60601-2-17:1996/A1:1996 - Medical electrical equipment - Part 2: Particular requirements for the safety of remote-controlled automatically-driven gamma-ray after-loading equipment

Relations

Amends
SIST EN 60601-2-17:1998 - Medical electrical equipment -- Part 2: Particular requirements for the safety of remote-controlled automatically-driven gamma-ray after-loading equipment
Effective Date
01-Sep-1998
Replaced By
SIST EN 60601-2-17:2004 - Medical electrical equipment - Part 2-17: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment (IEC 60601-2-17:2004)
Effective Date
29-Jan-2023
Replaced By
SIST EN 60601-2-17:2004 - Medical electrical equipment - Part 2-17: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment (IEC 60601-2-17:2004)
Effective Date
07-Jun-2022
Amends
SIST EN 60601-2-17:1998 - Medical electrical equipment -- Part 2: Particular requirements for the safety of remote-controlled automatically-driven gamma-ray after-loading equipment
Effective Date
28-Jan-2023
Amends
SIST EN 60601-2-17:1998 - Medical electrical equipment -- Part 2: Particular requirements for the safety of remote-controlled automatically-driven gamma-ray after-loading equipment
Effective Date
07-Jun-2022

Buy Standard

EN 60601-2-17:1998/A1:1998EN 60601-2-17:1998/A1:1998
PreviousNext
Amendment
EN 60601-2-17:1998/A1:1998
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60601-2-17:1998/A1:1998
01-september-1998
Medical electrical equipment - Part 2: Particular requirements for the safety of
remote-controlled automatically-driven gamma-ray afterloading equipment -
Amendment A1 (IEC 60601-2-17:1989/A1:1996)
Medical electrical equipment -- Part 2: Particular requirements for the safety of remote-
controlled automatically-driven gamma-ray after-loading equipment
Medizinische elektrische Geräte -- Teil 2: Besondere Festlegungen für die Sicherheit
ferngesteuerter, automatisch betriebener Afterloading-Geräte für Gamma-Strahlung
Appareils électromédicaux -- Partie 2: Règles particulières de sécurité des appareils
projecteurs de sources radioactives automatiques télécommandés utilisés en
radiothérapie par rayonnement gamma
Ta slovenski standard je istoveten z: EN 60601-2-17:1996/A1:1996
ICS:
11.040.60 Terapevtska oprema Therapy equipment
SIST EN 60601-2-17:1998/A1:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60601-2-17:1998/A1:1998

---------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60601-2-1:2021(Main)
Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV (IEC 60601-2-1:2020)
EN IEC 60601-2-1:2021

This part of IEC 60601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ELECTRON
ACCELERATORS, hereafter referred to as ME EQUIPMENT, in the range 1 MeV to 50 MeV, used for
TREATMENT of PATIENTS.
NOTE 1 While ELECTRON ACCELERATORS used for TREATMENT of PATIENTS are always ME EQUIPMENT, there are times
in this document where they are referred to as EXTERNAL BEAM EQUIPMENT (EBE). Usage of EBE does not remove the
requirements placed on the ME EQUIPMENT but is meant to clarify that the ME EQUIPMENT being discussed is the EBE
and not some other ME EQUIPMENT that may be part of the system configuration.
This particular standard, with the inclusion of TYPE TESTS and SITE TESTS, applies to the
manufacture and some installation aspects of ELECTRON ACCELERATORS and their included
equipment used to increase the precision, accuracy and volumetric targeting of the TREATMENT
delivery
– intended for RADIOTHERAPY in medical practice, including those in which the selection and
DISPLAY of TREATMENT PARAMETERS can be controlled automatically by PROGRAMMABLE
ELECTRONIC SUBSYSTEMS (PESS),
– that, under NORMAL CONDITIONS and in NORMAL USE, deliver a RADIATION BEAM of X-RADIATION
or ELECTRON RADIATION having
• NOMINAL ENERGY in the range 1 MeV to 50 MeV,
• maximum ABSORBED DOSE RATES between 0,001 Gy × s–1 and 1 Gy × s–1 at the ERP from
the RADIATION SOURCE, and
• REFERENCE TREATMENT DISTANCES (RTDs) between 0,5 m and 2 m from the RADIATION
SOURCE;
and
– intended to be
• for NORMAL USE, operated under the authority of the RESPONSIBLE ORGANIZATION by
QUALIFIED PERSONS appropriately licensed or having the required skills for a particular
medical application, for particular SPECIFIED clinical purposes,
• maintained in accordance with the recommendations given in the INSTRUCTIONS FOR USE,
and
• subject to regular QUALITY ASSURANCE performance and calibration checks by a QUALIFIED
PERSON.

  • Standard
    118 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-50:2021(Main)
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (IEC 60601-2-50:2020)
EN IEC 60601-2-50:2021

EN-IEC 60601-2-50 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of INFANT PHOTOTHERAPY EQUIPMENT, as defined in 201.3.203, also referred to as ME EQUIPMENT.If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant.HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document,except in 7.2.13 and 8.4.1 of the general standard. This particular standard specifies safety requirements for INFANT PHOTOTHERAPY EQUIPMENT,but alternate methods of compliance with a specific clause by demonstrating equivalent safety will not be judged as non-compliant if the MANUFACTURER has demonstrated in his RISK MANAGEMENT FILE that the RISK presented by the HAZARD has been found to be of an acceptable level when weighed against the benefit of treatment from the device.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-83:2020/A11:2021(Amendment)
Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment
EN IEC 60601-2-83:2020/A11:2021

2021-02.09 -JO - positive assessment for MDD (EN IEC 60601-2-83:2020 - PR= 64477) and the comments of the HAS consultant for MDR was resolved by the TC for EN IEC 60601-2-83:2020/prA11 - PR= 72969
This A11 introduces a revised Annex ZA & Annex ZZ  to EN IEC 60601-2-83:2020 in view of offering it for citation in OJEU under MDD (93/42/EEC) and MDR (2017/745)

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 80601-2-78:2020(Main)
Medical Electrical Equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation (IEC 80601-2-78:2019)
EN IEC 80601-2-78:2020

EN-IEC 62386-105 applies to control gear and control devices.Typically, a bus unit according to IEC 62386 (all parts) contains firmware. There arecircumstances where it might be necessary to change the firmware after production orshipping of the product. For example if the bus unit does not operate as intended. In such acase, a firmware update of a bus unit via the interface is beneficial.This firmware update process is primarily designed to be a bug fix process, not a featureextension process. Nevertheless the firmware update process can be used for featureextensions. But it is important that the risk of negative effects to the complete system isconsidered in detail.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60601-2-83:2020(Main)
Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment (IEC 60601-2-83:2019)
EN IEC 60601-2-83:2020

EN-IEC 60601-2-83 is applicable to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HOME LIGHT THERAPY EQUIPMENT, intended for use in the HOME HEALTHCARE ENVIRONMENT. HOME LIGHT THERAPY EQUIPMENT is typically used by a LAY OPERATOR. The scope of this document includes all light sources except laser. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62667:2018(Main)
Medical electrical equipment - Medical light ion beam equipment - Performance characteristics (IEC 62667:2017)
EN IEC 62667:2018

This document applies to LIGHT ION BEAM ME EQUIPMENT when used, for therapy purposes, in
human medical practice.
This document applies to LIGHT ION BEAM ME EQUIPMENT which delivers LIGHT ION BEAMS with an
ENERGY PER NUCLEON in the range 10 MeV/n to 500 MeV/n.
This document describes measurements and test procedures to be performed by the
MANUFACTURER of LIGHT ION BEAM ME EQUIPMENT but does not specify ACCEPTANCE TESTS.
This document specifies test procedures for the determination and disclosure of performance
characteristics, knowledge of which is necessary for proper selection, application, and use of
LIGHT ION BEAM ME EQUIPMENT and which are to be declared in the ACCOMPANYING
DOCUMENTATION together with the greatest deviation or variation to be expected under specific
conditions in NORMAL USE. A format for presentation of performance values is given in
Annex A.
It is recognized that inaccuracies in the test methods can occur when assessing performance.
However, it was felt preferable not to combine the errors into an overall performance
tolerance but rather to keep them separate in the expectation that more accurate test methods
will evolve.
It is not intended that this document in any way inhibit the future development of new designs
of equipment which may have operating modes and parameters different from those described
herein, provided that such equipment achieves equivalent or better levels of performance for
the TREATMENT of PATIENTS.
This document applies to both ISOCENTRIC and non-ISOCENTRIC GANTRIES but many of the tests
assume that the LIGHT ION BEAM ME EQUIPMENT has an ISOCENTRIC GANTRY. Where the
equipment is non-ISOCENTRIC, the description of performance and test methods may be
suitably adapted.

  • Standard
    121 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-10:2015/A1:2017(Amendment)
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators (IEC 60601-2-10:2012/A1:2016)
EN 60601-2-10:2015/A1:2016
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-50:2009/A1:2017(Amendment)
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (IEC 60601-2-50:2009/A1:2016)
EN 60601-2-50:2009/A1:2016
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-6:2015/A1:2016(Amendment)
Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment - Proposed Horizontal Standard (IEC 60601-2-6:2012/A1:2016)
EN 60601-2-6:2015/A1:2016
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60601-2-3:2015/A1:2016(Amendment)
Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment - Proposed Horizontal Standard (IEC 60601-2-3:2012/A1:2016)
EN 60601-2-3:2015/A1:2016
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day