SIST EN ISO 11507:2007
(Main)Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007)
Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007)
This International Standard specifies exposure conditions for paint coatings exposed to artificial weathering in apparatus including fluorescent UV lamps and condensation or water spray. The effects of weathering are evaluated separately by comparative testing of chosen parameters.
Beschichtungsstoffe - Beanspruchung von Beschichtungen durch künstliche Bewitterung - Beanspruchung durch fluoreszierende UV-Strahlung und Wasser (ISO 11507:2007)
Diese Internationale Norm legt Bedingungen für die Beanspruchung von Beschichtungen durch künstliche Bewitterung in Geräten mit UV-Leuchtstofflampen und Kondensation von oder Besprühen mit Wasser fest. Die Einflüsse der Bewitterung werden gesondert durch vergleichende Prüfung ausgewählter Parameter beurteilt.
ANMERKUNG Die UV-Leuchtstofflampen emittieren nur den photochemisch wirksamen ultravioletten Bereich der natürlichen Sonnenstrahlung und setzen deshalb die Probenkörper dem schmalen, jedoch zerstörenden Anteil des Spektrums aus.
Da sichtbare und infrarote Strahlungsenergie fehlt, werden die Probenkörper nicht wie bei Sonnenstrahlung über die Umgebungstemperatur hinaus erwärmt.
Peintures et vernis - Exposition des revetements au vieillissesment artificiel - Exposition au rayonnement de lampes a fluorescence UV et a l'eau (ISO 11507:2007)
L'ISO 11507:2007 spécifie les conditions d'exposition des revêtements de peinture au vieillissement artificiel dans un appareil comportant des lampes à fluorescence UV et produisant de la condensation ou de la pulvérisation d'eau. Les effets du vieillissement sont évalués séparément en effectuant des essais comparatifs de paramètres sélectionnés.
Barve in laki - Izpostavitev premazov umetnemu vremenskemu staranju - Izpostavitev fluorescentnemu UV sevanju in vodi (ISO 11507:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11507:2007
01-julij-2007
1DGRPHãþD
SIST EN ISO 11507:2002
Barve in laki - Izpostavitev premazov umetnemu vremenskemu staranju -
Izpostavitev fluorescentnemu UV sevanju in vodi (ISO 11507:2007)
Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to
fluorescent UV lamps and water (ISO 11507:2007)
Beschichtungsstoffe - Beanspruchung von Beschichtungen durch künstliche Bewitterung
- Beanspruchung durch fluoreszierende UV-Strahlung und Wasser (ISO 11507:2007)
Peintures et vernis - Exposition des revetements au vieillissesment artificiel - Exposition
au rayonnement de lampes a fluorescence UV et a l'eau (ISO 11507:2007)
Ta slovenski standard je istoveten z: EN ISO 11507:2007
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 11507:2007 en;fr;de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 11507
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2007
ICS 87.040 Supersedes EN ISO 11507:2001
English Version
Paints and varnishes - Exposure of coatings to artificial
weathering - Exposure to fluorescent UV lamps and water (ISO
11507:2007)
Peintures et vernis - Exposition des revêtements au Beschichtungsstoffe - Beanspruchung von Beschichtungen
vieillissesment artificiel - Exposition au rayonnement de durch künstliche Bewitterung - Beanspruchung durch
lampes à fluorescence UV et à l'eau (ISO 11507:2007) fluoreszierende UV-Strahlung und Wasser (ISO
11507:2007)
This European Standard was approved by CEN on 29 December 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11507:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 11507:2007 (E)
Foreword
This document (EN ISO 11507:2007) has been prepared by Technical Committee ISO/TC 35
"Paints and varnishes" in collaboration with Technical Committee CEN/TC 139 "Paints and
varnishes", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2007, and conflicting national
standards shall be withdrawn at the latest by August 2007.
This document supersedes EN ISO 11507:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
Endorsement notice
The text of ISO 11507:2007 has been approved by CEN as EN ISO 11507:2007 without any
modifications.
2
---------------------- Page: 3 ----------------------
INTERNATIONAL ISO
STANDARD 11507
Second edition
2007-02-01
Paints and varnishes — Exposure of
coatings to artificial weathering —
Exposure to fluorescent UV lamps and
water
Peintures et vernis — Exposition des revêtements au vieillissement
artificiel — Exposition au rayonnement de lampes à fluorescence UV et
à l'eau
Reference number
ISO 11507:2007(E)
©
ISO 2007
---------------------- Page: 4 ----------------------
ISO 11507:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
---------------------- Page: 5 ----------------------
ISO 11507:2007(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope .1
2 Normative references .1
3 Terms and definitions .1
4 Principle.2
5 Apparatus .3
6 Sampling.6
7 Test panels .6
8 Procedure .7
9 Calibration .8
10 Examination of test panels (ageing criteria) .8
11 Precision.8
12 Supplementary test conditions .8
13 Test report .9
Bibliography .10
© ISO 2007 – All rights reserved iii
---------------------- Page: 6 ----------------------
ISO 11507:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11507 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 9,
General test methods for paints and varnishes.
This second edition cancels and replaces the first edition (ISO 11507:1997), which has been technically
revised. The main changes are:
⎯ the data on the lamps (tables in 5.1.2) have been harmonized with the data given in ISO 4892-3;
⎯ the purity of the water for wetting the test panels has been changed from grade 2 to grade 3;
⎯ conditioning of the coated test panels prior to testing has been deleted.
iv © ISO 2007 – All rights reserved
---------------------- Page: 7 ----------------------
ISO 11507:2007(E)
Introduction
Coatings from paints, varnishes and similar materials are weathered in the laboratory, in order to simulate
ageing processes occurring during natural weathering. Generally, valid correlations between ageing during
artificial and natural weathering cannot be expected because of the large number of influencing factors. Certain
relationships can only be expected if the effect of the important parameters (spectral distribution of the irradiance
in their photochemically relevant range, temperature of the specimen, type of wetting, wetting cycle relative
humidity) on the coating is known. However, unlike natural weathering, testing in the laboratory is carried out
taking into consideration a limited number of variables which can be controlled and therefore the results are
more reproducible.
© ISO 2007 – All rights reserved v
---------------------- Page: 8 ----------------------
INTERNATIONAL STANDARD ISO 11507:2007(E)
Paints and varnishes — Exposure of coatings to artificial
weathering — Exposure to fluorescent UV lamps and water
1 Scope
This International Standard specifies exposure conditions for paint coatings exposed to artificial weathering in
apparatus including fluorescent UV lamps and condensation or water spray. The effects of weathering are
evaluated separately by comparative testing of chosen parameters.
NOTE The ultraviolet light produced by fluorescent lamps simulates only part of the UV region of natural sunlight and,
consequently, the test pieces are subjected to a small but destructive portion of the spectrum.
Due to the lack of visible and infra-red energy in the light from such UV lamps compared to sunlight, the test
pieces are not heated above the temperature of the surrounding air in the way in which they would be in
practical use.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 1513, Paints and varnishes — Examination and preparation of samples for testing
ISO 1514, Paints and varnishes — Standard panels for testing
ISO 2808, Paints and varnishes — Determination of film thickness
ISO 3696:1987, Water for analytical laboratory use — Specification and test methods
ISO 4892-1:1999, Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
ISO 15528, Paints, varnishes and raw materials for paints and varnishes — Sampling
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
ageing criterion
given degree of change in a selected property of the coating under test
NOTE The ageing criterion is specified or agreed upon.
[ISO 11341:2004]
© ISO 2007 – All rights reserved 1
---------------------- Page: 9 ----------------------
ISO 11507:2007(E)
3.2
ageing behaviour
change in the properties of a coating during weathering or exposure to radiation
[ISO 11341:2004]
NOTE One measure of ageing is the radiant exposure below 400 nm or the radiant exposure at a specific wavelength
that is necessary to cause a specific property change.
3.3
irradiance
E
radiant flux/area for a specified wavelength range, expressed in watts per square metre
3.4
radiant exposure
H
amount of radiant energy to which a test panel has been exposed, given by the equation
H= Etd
∫
where
E is the irradiance, in watts per square metre;
t is the exposure time, in seconds.
NOTE 1 H is therefore expressed in joules per square metre.
NOTE 2 If the irradiance E is constant throughout the whole exposure time, the radiant exposure H is given simply by
the product of E and t.
[ISO 11341:2004]
4 Principle
Artificial weathering of coatings using fluorescent UV lamps and condensation or water spray is carried out in
order to produce a certain radiant exposure or mutually agreed total number of operation hours and a given
degree of a change in a property or properties.
The properties of the exposed coatings are compared with those of unexposed coatings, prepared from the
same coating materials under identical conditions, or with coatings whose degradation properties are known.
These properties are evaluated in accordance with criteria agreed in advance between the interested parties.
Radiation, temperature and humidity all contribute to the ageing process. Therefore, apparatus specified in
this International Standard simulates all three factors.
The results obtained by the use of this method do not necessarily relate directly to the results obtained under
natural exposure conditions. The relationship between these results needs to be established before the
method can be used to predict performance. Different chemical behaviour can result in a different correlation
between accelerated weathering and natural weathering.
2 © ISO 2007 – All rights reserved
---------------------- Page: 10 ----------------------
ISO 11507:2007(E)
5 Apparatus
5.1 Test chamber
5.1.1 General
The test chamber consists essentially of a conditioned enclosure, made from corrosion-resistant material, in
which are housed the lamps, a heated water-tray or spray nozzles and test panel racks.
5.1.2 Lamps
UV lamps emit UV light from a low-pressure mercury arc. The required spectral distribution is achieved by a
careful selection of the type of phosphor coating on the inner surface of the lamp and the nature of the glass
used in the construction of the tubes.
Unless otherwise specified, the lamp shall be one of the three types listed below:
Type I: This lamp emits a significant amount of radiation at wavelengths below 300 nm which is not present in
the sun's radiation. Some lamps of this type have a measurable emittance at the 254 nm mercury line. Due to
the higher quantum energy of this radiation, photochemical ageing processes can be initiated which do not
take place in natural weathering. Therefore, this type of fluorescent lamp should be used only when specially
agreed between the parties concerned.
This lamp, commonly called UVB-313, has a peak emission at 313 nm and the relative spectral irradiance
given in Table 1.
a,b
Table 1 — Relative ultraviolet spectral irradiance for UVB-313 lamps
c
c d,e
Spectral passband Minimum CIE No. 85:1989, Table 4 Maximum
(λ = wavelength in nm)
% % %
λ < 290 1,3 0 5,4
290 u λ u 320 47,8 5,4 65,9
320 < λ u 360 26,9 38,2 43,9
360 < λ u 400 1,7 56,4 7,2
a
This table gives the irradiance in the given passband, expressed as a percentage of the total irradiance between 250 nm and
400 nm. To determine whether a specific type I (UVB-313) lamp meets the requirements of this table, the spectral irradiance from
250 nm to 400 nm shall be measured. The total irradiance in each passband is then summed and divided by the total irradiance
between 250 nm and 400 nm.
b
The minimum and maximum limits given in this table are based on 44 spectral irradiance measurements with type I (UVB-313)
[18]
lamps from different production lots and of various ages . The spectral irradiance data are for lamps within the ageing
recommendations of the apparatus manufacturer. As more spectral irradiance data become available, minor changes in the limits are
possible. The minimum and maximum limits are at least three sigma from the mean for all the measurements.
c
The minimum and maximum columns will not necessarily sum to 100 % because they represent the minima and maxima for the
measurement data used. For any individual spectral irradiance distribution, the percentages calculated for the passbands in this table
will sum to 100 %. For any individual type I (UVB-313) fluorescent lamp, the calculated percentage in each passband shall fall within the
minimum and maximum limits given. Test results can be expected to differ between exposures using type I (UVB-313) lamps in which
the spectral irradiance differs by as much as that allowed by the tolerances. Contact the manufacturer of the fluorescent UV apparatus
for specific spectral irradiance data for the type I (UVB-313) lamp used.
d
The data from Table 4 in CIE Publication No. 85:1989 is the global solar irradiance on a horizontal surface for an air mass of 1,0,
an ozone column of 0,34 cm at STP, 1,42 cm of precipitable water vapour and a spectral optical depth of aerosol extinction of 0,1 at
500 nm. These data are provided for reference purposes only.
e
For the solar spectrum represented by Table 4 in CIE No. 85:1989, the UV irradiance (290 nm to 400 nm) is 11 % and the visible
irradiance (400 nm to 800 nm) is 89 %, expressed as a percentage of the total irradiance from 290 nm to 800 nm. Because the primary
emission of fluorescent UV lamps is concentrated in the 300 nm to 400 nm passband, there are limited data available for the visible light
emission of fluorescent UV lamps. The percentages of UV irradiance and visible irradiance on specimens expo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.