SIST EN 13303:2009
(Main)Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen
Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen
This European Standard specifies a method for the determination of the loss in mass of industrial bitumen after heating. The method is used to detect volatile components.
NOTE The users of the method are encouraged to gather comparative information on binders using this standard, EN 13303, and EN 12607-2 at 163 °C to facilitate the withdrawal of EN 13303 at the next systematic review.
WARNING - The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Masseverlustes von Industriebitumen nach Erwärmung
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Masseverlustes von Industriebitumen nach
Erwärmung fest. Das Verfahren dient zum Nachweis flüchtiger Bestandteile.
ANMERKUNG Die Anwender dieses Verfahrens werden ermutigt, vergleichbare Informationen über Bindemittel mittels
dieser Norm, EN 13303, und EN 12607-2 bei 163 °C zu sammeln, um bei der nächsten periodischen Überprüfung die
Zurückziehung von EN 13303 zu unterstützen.
WARNUNG - Bei Anwendung dieser Norm können gefährliche Materialien, Arbeiten und
Prüfeinrichtungen eingesetzt werden. Diese Norm berücksichtigt nicht alle möglicherweise bei ihrer
Anwendung auftretenden Sicherheitsprobleme. Es liegt in der Verantwortung des Anwenders,
Verhaltensregeln zur Sicherheit und Gesundheit festzulegen und vor der Anwendung die Anwendbarkeit
einschränkender Regelungen zu bestimmen.
Bitumes et liants bitumineux - Détermination de la perte de masse au chauffage des bitumes industriels
La présente Norme européenne prescrit une méthode de détermination de la perte de masse des bitumes industriels après chauffage. On utilise cette méthode pour détecter des composants volatils. NOTE Les utilisateurs de la présente méthode sont invités à collecter des informations comparatives sur les liants obtenus sur la base de la présente norme, l’EN 13303, et l’EN 12607-2 à 163 °C pour permettre la suppression de l’EN 13303 lors du prochain examen systématique. AVERTISSEMENT - L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractères dangereux. La présente Norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določanje izgube mase industrijskih bitumnov po segrevanju
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VHJUHYDQMXBitumen und bitumenhaltige Bindemittel - Bestimmung des Masseverlustes von Industriebitumen nach ErwärmungBitumes et liants bitumineux - Détermination de la perte de masse au chauffage des bitumes industrielsBitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13303:2009SIST EN 13303:2009en,fr,de01-julij-2009SIST EN 13303:2009SLOVENSKI
STANDARDSIST EN 13303:20031DGRPHãþD
SIST EN 13303:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13303March 2009ICS 75.140; 91.100.50Supersedes EN 13303:2003
English VersionBitumen and bituminous binders - Determination of the loss inmass after heating of industrial bitumenBitumes et liants bitumineux - Détermination de la perte demasse au chauffage des bitumes industrielsBitumen und bitumenhaltige Bindemittel - Bestimmung desMasseverlustes von Industriebitumen nach ErwärmungThis European Standard was approved by CEN on 10 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13303:2009: ESIST EN 13303:2009
EN 13303:2009 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Principle .45 Apparatus .46 Sampling .77 Procedure .78 Calculation .89 Expression of results .810 Precision .811 Test report .9Annex A (normative)
Specifications of thermometer . 10Bibliography . 11 SIST EN 13303:2009
EN 13303:2009 (E) 3 Foreword This document (EN 13303:2009) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13303:2003. The explicit design of the aluminium shelf presented on Figure 1 is no more mandatory (for quality control reasons), but only proposed as an example. Moreover, users of this standard are invited to gather comparative information with EN 12607-2, to facilitate the withdrawal of this standard at the next systematic review. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 13303:2009
EN 13303:2009 (E) 4 1 Scope This European Standard specifies a method for the determination of the loss in mass of industrial bitumen after heating. The method is used to detect volatile components. NOTE The users of the method are encouraged to gather comparative information on binders using this standard, EN 13303 and EN 12607-2 [1] at 163 °C to facilitate the withdrawal of EN 13303 at the next systematic review. WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders – Sampling bituminous binders EN 1426, Bitumen and bituminous binders – Determination of needle penetration EN 12594, Bitumen and bituminous binders – Preparation of test samples 3 Terms and definitions For the purposes of this document, the following term and definition applies. 3.1 lo
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VHJUHYDQMXBitumen und bitumenhaltige Bindemittel - Bestimmung des Masseverlustes von Industriebitumen nach ErwärmungBitumes et liants bitumineux - Détermination de la perte de masse au chauffage des bitumes industrielsBitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:prEN 13303kSIST prEN 13303:2008en,fr,de01-december-2008kSIST prEN 13303:2008SLOVENSKI
STANDARD
kSIST prEN 13303:2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTprEN 13303October 2008ICS 75.140; 91.100.50Will supersede EN 13303:2003
English VersionBitumen and bituminous binders - Determination of the loss inmass after heating of industrial bitumenBitumes et liants bitumineux - Détermination de la perte demasse au chauffage des bitumes industrielsBitumen und bitumenhaltige Bindemittel - Bestimmung desMasseverlustes von Industriebitumen nach ErwärmungThis draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the TechnicalCommittee CEN/TC 336.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. prEN 13303:2008: EkSIST prEN 13303:2008
prEN 13303:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Apparatus.4 6 Sampling.7 7 Procedure.7 8 Calculation.8 9 Expression of results.8 10 Precision.8 11 Test report.8 Annex A (normative)
Specifications of thermometer.10 Bibliography.11
kSIST prEN 13303:2008
prEN 13303:2008 (E) 3 Foreword This document (prEN 13303:2008) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 13303:2003. kSIST prEN 13303:2008
prEN 13303:2008 (E) 4 1 Scope This European Standard specifies a method for the determination of the loss in mass of industrial bitumen after heating. The method is used to detect volatile components. NOTE The users of the method are encouraged to gather comparative information on binders using this standard, EN 13303, and EN 12607-2 at 163 °C to facilitate the withdrawal of EN 13303 at the next systematic review. WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders – Sampling bituminous binders EN 1426, Bitumen and bituminous binders – Determination of needle penetration EN 12594, Bitumen and bituminous binders – Preparation of test samples 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 loss on heating ratio between the loss of mass of a heated sample and its initial mass, expressed as a percentage of the latter 4 Principle A weighed sample is heated for a specified time at a specified temperature and is re-weighed at the conclusion of the heating period. 5 Apparatus 5.1 Oven, electrically heated and conforming to the performance requirements for ovens ventilated by natural convection and for operating temperatures up to 180 °C. The oven
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.