SIST EN 13303:2017
(Main)Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen
Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen
This European Standard specifies a method for the determination of the loss in mass of industrial bitumen after heating. The method is used to detect volatile components.
NOTE The users of the method are encouraged to gather comparative information on binders using this standard, EN 13303 and EN 12607-2 [1] at 163 °C to facilitate the transition to the use of only one standard.
WARNING - The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Masseverlustes von Industriebitumen nach Erwärmung
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Masseverlustes von Industriebitumen nach Erwärmung fest. Das Verfahren dient zum Nachweis flüchtiger Bestandteile.
ANMERKUNG Die Anwender dieses Verfahrens werden ermutigt, vergleichbare Informationen über Bindemittel mittels dieser Norm, EN 13303, und EN 12607 2 [1] bei 163 °C zu sammeln, um den Übergang zur Anwendung von nur einer Norm zu erleichtern.
WARNUNG - Die Anwendung dieser Europäischen Norm kann die Anwendung gefährlicher Stoffe, Arbeitsgänge und Geräte mit sich bringen. Diese Europäische Norm beansprucht nicht, alle damit verbundenen Sicherheitsprobleme zu behandeln. Es liegt in der Verantwortung des Anwenders dieser Europäischen Norm, vor ihrer Anwendung geeignete Maßnahmen für die Sicherheit und den Gesundheitsschutz des Personals zu ergreifen, und dafür Sorge zu tragen, dass behördliche und gesetzliche Maßnahmen eingehalten werden.
Bitumes et liants bitumineux - Détermination de la perte de masse au chauffage des bitumes industriels
La présente Norme européenne prescrit une méthode de détermination de la perte de masse des bitumes industriels après chauffage. On utilise cette méthode pour détecter des composants volatils.
NOTE Les utilisateurs de la présente méthode sont invités à collecter des informations comparatives sur les liants obtenus sur la base de la présente norme, l’EN 13303, et de l’EN 12607-2 [1] à 163 °C pour faciliter la transition vers l’utilisation d’une seule norme.
AVERTISSEMENT - L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractères dangereux. La présente Norme européenne n'est pas censée aborder tous les problèmes de sécurité associés à son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določanje izgube mase industrijskih bitumnov po segrevanju
Ta evropski standard določa metodo za določanje izgube mase industrijskih bitumnov po segrevanju. Metoda se uporablja za odkrivanje hlapnih komponent.
OPOMBA: Uporabnikom metode se priporoča, da zberejo primerjalne informacije o vezivih pri 163 °C iz tega standarda ter standardov EN 13303 in EN 12607-2 [1] za lažji prehod na uporabo enega standarda.
OPOZORILO: Pri uporabi tega standarda so lahko prisotni nevarni materiali, postopki in oprema. Ta standard ne obravnava vseh varnostnih težav, ki se nanašajo na njegovo uporabo. Za vzpostavitev ustreznih varnostnih in zdravstvenih praks ter za določitev uporabnosti regulativnih omejitev pred uporabo je odgovoren uporabnik tega standarda.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VHJUHYDQMXBitumen und bitumenhaltige Bindemittel - Bestimmung des Masseverlustes von Industriebitumen nach ErwärmungBitumes et liants bitumineux - Détermination de la perte de masse au chauffage des bitumes industrielsBitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13303:2017SIST EN 13303:2017en,fr,de01-november-2017SIST EN 13303:2017SLOVENSKI
STANDARDSIST EN 13303:20091DGRPHãþD
SIST EN 13303:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13303
September
t r s y ICS
y wä s v râ
{ sä s r rä w r Supersedes EN
s u u r uã t r r {English Version
Bitumen and bituminous binders æ Determination of the loss in mass after heating of industrial bitumen Bitumes et liants bitumineux æ Détermination de la perte de masse au chauffage des bitumes industriels
Bitumen und bitumenhaltige Bindemittel æ Bestimmung des Masseverlustes von Industriebitumen nach Erwärmung This European Standard was approved by CEN on
s May
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u u r uã t r s y ESIST EN 13303:2017
EN 13303:2017 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Principle . 4 5 Apparatus . 4 6 Sampling . 7 7 Procedure. 8 8 Calculation . 8 9 Expression of results . 9 10 Precision . 9 10.1 Repeatability . 9 10.2 Reproducibility . 9 11 Test report . 9 Annex A (informative)
Characteristics of thermometer for the reference temperature (163 °C) . 10 Bibliography . 11
SIST EN 13303:2017
EN 13303:2017 (E) 3 European foreword This document (EN 13303:2017) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13303:2009. The primary objective of this revision has been to delete the mercury containing thermometer as reference. Other changes are:
The method can be performed at various test temperatures, but 163 °C is the reference temperature.
Clause 9 Expression of results has been made more precise. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13303:2017
EN 13303:2017 (E) 4 1 Scope This European Standard specifies a method for the determination of the loss in mass of industrial bitumen after heating. The method is used to detect volatile components. The method can be performed at various test temperatures, but 163 °C is the reference temperature. NOTE The users of the method are encouraged to gather comparative information on binders using this standard, EN 13303 and EN 12607–2 [1] at 163 °C to facilitate the transition to the use of only one standard. WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders - Sampling bituminous binders EN 1426, Bitumen and bituminous binders - Determination of needle penetration EN 12594, Bitumen and bituminous binders - Preparation of test samples 3 Terms and definitions For the purposes of this document, the following term and definition applies. 3.1 loss on heating ratio in between the loss in mass after heating a sample and its initial mass, expre
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.