SIST ISO 80000-1:2013/AC 101:2013
(Corrigendum)Quantities and units - Part 1: General
Quantities and units - Part 1: General
ISO 80000-1 gives general information and definitions concerning quantities, systems of quantities, units, quantity and unit symbols, and coherent unit systems, especially the International System of Quantities, ISQ, and the International System of Units, SI. The principles laid down in ISO 80000-1 are intended for general use within the various fields of science and technology, and as an introduction to other parts of this International Standard. Ordinal quantities and nominal properties are outside the scope of ISO 80000-1.
Größen und Einheiten - Teil 1: Allgemeines
Grandeurs et unités - Partie 1: Généralités
Veličine in enote - 1. del: Splošno - Popravek AC101
Standard ISO 80000-1 podaja splošne informacije in definicije v zvezi z veličinami, sistemi veličin, enotami, simboli za veličine in enote ter skladne sisteme enot, zlasti mednarodni sistem veličin (ISQ) in mednarodni sistem enot (SI). Načela, opisana v standardu ISO 80000-1, so namenjena za splošno uporabo na različnih področjih znanosti in tehnike ter kot uvod v druge dele tega mednarodnega standarda. Vrstilne veličine in nominalne lastnosti ne spadajo na področje uporabe standarda ISO 80000-1.
General Information
Standards Content (Sample)
SLOVENSKI
SIST ISO 80000-1:2013/AC101 STANDARD
november 2013
Veličine in enote – 1. del: Splošno – Popravek AC101
Quantities and units – Part 1: General
Grandeurs et unités – Partie 1: Généralités
Größen und Einheiten – Teil 1: Allgemeines
Odločitev za izdajo tega popravka je dne 11. oktobra 2013 sprejel SIST/TC TRS Tehnično risanje, veličine, enote, simboli in grafični simboli.
Referenčna oznaka ICS 01.060 SIST ISO 80000-1:2013/AC101:2013 (sl)
Nadaljevanje na strani 2
© 2013-11. Standard je založi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.