SIST EN ISO 80000-1:2023
(Main)Quantities and units - Part 1: General (ISO 80000-1:2022)
Quantities and units - Part 1: General (ISO 80000-1:2022)
This document gives general information and definitions concerning quantities, systems of quantities, units, quantity and unit symbols, and coherent unit systems, especially the International System of Quantities (ISQ).
The principles laid down in this document are intended for general use within the various fields of science and technology, and as an introduction to other parts of this International Standard.
The ISO/IEC 80000 series does not, as yet, cover ordinal quantities and nominal properties.
Größen und Einheiten – Teil 1: Allgemeines (ISO 80000-1:2022)
Dieses Dokument enthält allgemeine Informationen und Definitionen zu Größen, Größensystemen, Einheiten, Formelzeichen für Größen und Einheiten sowie zu kohärenten Einheitensystemen, insbesondere zum Internationalen Größensystem (ISQ, en: International System of Quantities).
Die in diesem Dokument festgelegten Grundsätze sind für den allgemeinen Gebrauch innerhalb der unterschiedlichen Gebiete von Wissenschaft und Technik vorgesehen sowie als Einführung in andere Teile dieser Internationalen Norm.
Ordinalmerkmale (en: ordnial quantities) und Nominalmerkmale (en: nominal properties) werden von der Normenreihe ISO/IEC 80000 bisher nicht abgedeckt.
Grandeurs et unités - Partie 1 : Généralités (ISO 80000-1:2022)
Le présent document donne des informations générales et des définitions à propos des grandeurs, des systèmes de grandeurs, des unités, des symboles de grandeurs et d’unités, et des systèmes cohérents d’unités, notamment le Système international de grandeurs (ISQ).
Les principes établis dans le présent document sont prévus pour un usage général dans les divers domaines scientifiques et techniques, ainsi qu’en introduction aux autres parties de la présente Norme internationale.
La série ISO/IEC 80000 ne couvre pas, à l’heure actuelle, les grandeurs ordinales et les propriétés qualitatives.
Veličine in enote - 1. del: Splošno (ISO 80000-1:2022)
Ta dokument podaja splošne informacije in definicije v zvezi z veličinami, sistemi veličin, enotami, simboli za veličine in enote ter skladne sisteme enot, zlasti mednarodni sistem veličin (ISQ).
Načela, opisana v tem dokumentu, so namenjena za splošno uporabo na različnih področjih znanosti in tehnologije ter kot uvod v druge dele tega mednarodnega standarda.
Skupina standardov ISO/IEC 80000 še ne zajema vrstilnih veličin in nominalnih lastnosti.
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 80000-1:2023
01-marec-2023
Nadomešča:
SIST EN ISO 80000-1:2013
SIST ISO 80000-1:2013
Veličine in enote - 1. del: Splošno (ISO 80000-1:2022)
Quantities and units - Part 1: General (ISO 80000-1:2022)
Größen und Einheiten – Teil 1: Allgemeines (ISO 80000-1:2022)
Grandeurs et unités - Partie 1 : Généralités (ISO 80000-1:2022)
Ta slovenski standard je istoveten z: EN ISO 80000-1:2022
ICS:
01.060 Veličine in enote Quantities and units
SIST EN ISO 80000-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 80000-1:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 80000-1:2023
EN ISO 80000-1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 01.060 Supersedes EN ISO 80000-1:2013
English Version
Quantities and units - Part 1: General (ISO 80000-1:2022)
Grandeurs et unités - Partie 1: Généralités (ISO 80000- Größen und Einheiten - Teil 1: Allgemeines (ISO
1:2022) 80000-1:2022)
This European Standard was approved by CEN on 2 December 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 80000-1:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 80000-1:2023
EN ISO 80000-1:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 80000-1:2023
EN ISO 80000-1:2022 (E)
European foreword
This document (EN ISO 80000-1:2022) has been prepared by Technical Committee ISO/TC 12
"Quantities and units" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 80000-1:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 80000-1:2022 has been approved by CEN as EN ISO 80000-1:2022 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 80000-1:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 80000-1:2023
INTERNATIONAL ISO
STANDARD 80000-1
Second edition
2022-12
Quantities and units —
Part 1:
General
Grandeurs et unités —
Partie 1: Généralités
Reference number
ISO 80000-1:2022(E)
© ISO 2022
---------------------- Page: 7 ----------------------
SIST EN ISO 80000-1:2023
ISO 80000-1:2022(E)
COPYRIGHT PROTECTED DOCUMENT
©
...
SIST EN ISO 80000-1
SL O V EN S K I
S T ANDAR D
marec 2023
Veličine in enote – 1. del: Splošno (ISO 80000-1:2022)
Quantities and units – Part 1: General (ISO 80000-1:2022)
Größen und Einheiten – Teil 1: Allgemeines (ISO 80000-1:2022)
Grandeurs et unités – Partie 1 : Généralités (ISO 80000-1:2022)
Referenčna oznaka
ICS 01.060 SIST EN ISO 80000-1:2023 (sl)
Nadaljevanje na straneh II ter od 2 do 28
© 2024-03. Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 80000-1 : 2023
NACIONALNI UVOD
Standard SIST EN ISO 80000-1:2023 (sl), Veličine in enote – 1. del: Splošno (ISO 80000-1:2022) ima
status slovenskega standarda in je enakovreden evropskemu standardu EN ISO 80000-1:2022 (en),
Quantities and units - Part 1: General (ISO 80000-1:2022).
NACIONALNI PREDGOVOR
Evropski standard EN ISO 80000-1:2022 je pripravil tehnični odbor ISO/TC 12 "Veličine in enote" v
sodelovanju s tehničnim odborom IEC/TC 25 Veličine in enote.
Slovenski standard SIST EN ISO 80000-1:2023 je prevod evropskega standarda EN ISO 80000-1:2022.
V primeru spora glede besedila slovenskega prevoda v tem standardu je odločilen izvirni evropski
standard v angleškem jeziku. Slovensko izdajo standarda je pripravil tehnični odbor SIST/TC TRS
Tehnično risanje, veličine, enote, simboli in grafični simboli.
Odločitev za izdajo tega standarda je 4. 1. 2023 sprejel SIST/TC TRS Tehnično risanje, veličine, enote,
simboli in grafični simboli.
ZVEZA Z NACIONALNIMI STANDARDI
S privzemom tega evropskega standarda veljajo za omejeni namen referenčnih standardov vsi
standardi, navedeni v izvirniku, razen standardizacijskega vodila, ki smo ga že sprejeli v nacionalno
standardizacijo:
SIST-V ISO/IEC Vodilo 99:2012 (sl, en, fr), Mednarodni slovar za meroslovje – Osnovni in splošni
koncepti ter z njimi povezani izrazi (VIM)
PREDHODNA IZDAJA
– SIST EN ISO 80000-1:2013 Veličine in enote – 1. del: Splošno (ISO 80000-1:2009 + Popravek
1:2011)
OPOMBE
– Povsod, kjer se v besedilu standarda uporablja izraz "mednarodni standard", v SIST EN ISO 80000-
1:2023 to pomeni "slovenski standard".
– Formula na strani 4 originala standarda EN ISO 80000-1:2022 je, ker je v originalu zapisana
α β γδ ε ζ η
M T I Θ N J , v slovenskem prevodu standarda zapisana pravilno.
napačno: dim Q = L
– Nacionalni uvod in nacionalni predgovor nista sestavni del evropskega standarda.
II
---------------------- Page: 2 ----------------------
EVROPSKI STANDARD EN ISO 80000-1
EUROPEAN STANDARD
NORME EUROPÉENNE
december 2022
EUROPÄISCHE NORM
ICS 01.060
Slovenska izdaja
Veličine in enote – 1. del: Splošno (ISO 80000-1:2022)
Quantities and units – Part 1: Grandeurs et unités – Partie Größen und Einheiten – Teil
General (ISO 80000-1:2022) 1: Généralités (ISO 80000- 1: Allgemeines (ISO 80000-
1:2022) 1:2022)
Ta evropski standard je CEN sprejel dne 2. decembra 2022.
Člani CEN morajo izpolnjevati določila notranjih predpisov CEN/CENELEC, s katerimi je
predpisano, da mora biti ta evropski standard brez kakršnih koli sprememb sprejet kot
nacionalni standard. Seznami najnovejših izdaj teh nacionalnih standardov in njihovi
bibliografski podatki so na zahtevo na voljo pri Upravnem centru CEN-CENELEC ali članih CEN.
Ta evropski standard obstaja v treh uradnih izdajah (angleški, francoski in nemški). Izdaje v
drugih jezikih, ki jih člani CEN na lastno odgovornost prevedejo in izdajo ter prijavijo pri
Upravnem centru CEN-CENELEC, veljajo kot uradne izdaje.
Člani CEN so nacionalni organi za standarde Avstrije, Belgije, Bolgarije, Cipra, Češke republike,
Danske, Estonije, Finske, Francije, Grčije, Hrvaške, Irske, Islandije, Italije, Latvije, Litve,
Luksemburga, Madžarske, Malte, Nemčije, Nizozemske, Norveške, Poljske, Portugalske,
Republike Severne Makedonije, Romunije, Slovaške, Slovenije, Srbije, Španije, Švedske, Švice,
Turčije in Združenega kraljestva.
CEN
EVROPSKI ODBOR ZA STANDARDIZACIJO
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Upravni center CEN-CENELEC: Rue de la Science 23, B-1040 Bruselj
© 2022 CEN Ref. št. EN ISO 80000-1:2022 E
Vse pravice do izkoriščanja v kakršnikoli obliki in na
kakršnikoli način imajo nacionalni člani CEN.
---------------------- Page: 3 ----------------------
SIST EN ISO 80000-1 : 2023
VSEBINA Stran
Evropski predgovor . 3
2
---------------------- Page: 4 ----------------------
Evropski predgovor
Ta dokument (EN ISO 80000-1:2022) je pripravil teh
...
SLOVENSKI STANDARD
oSIST prEN ISO 80000-1:2022
01-april-2022
Veličine in enote - 1. del: Splošno (ISO/DIS 80000-1:2022)
Quantities and units - Part 1: General (ISO/DIS 80000-1:2022)
Größen und Einheiten – Teil 1: Allgemeines (ISO/DIS 80000-1:2022)
Grandeurs et unités - Partie 1 : Généralités (ISO/DIS 80000-1:2022)
Ta slovenski standard je istoveten z: prEN ISO 80000-1
ICS:
01.060 Veličine in enote Quantities and units
oSIST prEN ISO 80000-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 80000-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 80000-1:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 80000-1
ISO/TC 12 Secretariat: SIS
Voting begins on: Voting terminates on:
2022-01-28 2022-04-22
Quantities and units —
Part 1:
General
Grandeurs et unités —
Partie 1: Généralités
ICS: 01.060
This document is circulated as received from the committee secretariat.
This draft is submitted to a parallel vote in ISO and in IEC.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 80000-1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 80000-1:2022
ISO/DIS 80000-1:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 80000-1:2022
ISO/DIS 80000-1:2022(E)
Contents Page
Foreword .iv
0 Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Quantities . 1
4.1 The concept of quantity . 1
4.2 System of quantities ─ Base quantities and derived quantities . 2
4.3 Universal constants and empirical constants . 2
4.4 Constant multipliers in quantity equations. 2
4.5 International System of Quantities, ISQ . 3
5 Dimensions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.