SIST EN IEC 62343-2-1:2020/A1:2024
(Amendment)Dynamic modules - Part 2-1: Reliability qualification - Test template (IEC 62343-2-1:2019/AMD1:2023)
Dynamic modules - Part 2-1: Reliability qualification - Test template (IEC 62343-2-1:2019/AMD1:2023)
Dynamische Module - Teil 2-1: Zuverlässigkeitsnachweis - Prüfvorlage (IEC 62343-2-1:2019/AMD1:2023)
Modules dynamiques - Partie 2-1: Qualification de fiabilité - Modèle d'essai (IEC 62343-2-1:2019/AMD1:2023)
Dinamični moduli - 2-1. del: Kvalifikacije zanesljivosti - Predloga za preverjanje - Dopolnilo A1 (IEC 62343-2-1:2019/AMD1:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62343-2-1:2020/A1:2024
01-marec-2024
Dinamični moduli - 2-1. del: Kvalifikacije zanesljivosti - Predloga za preverjanje -
Dopolnilo A1 (IEC 62343-2-1:2019/AMD1:2023)
Dynamic modules - Part 2-1: Reliability qualification - Test template (IEC 62343-2-
1:2019/AMD1:2023)
Dynamische Module - Teil 2-1: Zuverlässigkeitsnachweis - Prüfvorlage (IEC 62343-2-
1:2019/AMD1:2023)
Modules dynamiques - Partie 2-1: Qualification de fiabilité - Modèle d'essai (IEC 62343-2
-1:2019/AMD1:2023)
Ta slovenski standard je istoveten z: EN IEC 62343-2-1:2019/A1:2024
ICS:
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
SIST EN IEC 62343-2-1:2020/A1:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62343-2-1:2020/A1:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 62343-2-1:2020/A1:2024
EUROPEAN STANDARD EN IEC 62343-2-1:2019/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2024
ICS 33.180.01
English Version
Dynamic modules - Part 2-1: Reliability qualification - Test
template
(IEC 62343-2-1:2019/AMD1:2023)
Modules dynamiques - Partie 2-1: Qualification de fiabilité - Dynamische Module - Teil 2-1: Zuverlässigkeitsnachweis -
Modèle d'essai Prüfvorlage
(IEC 62343-2-1:2019/AMD1:2023) (IEC 62343-2-1:2019/AMD1:2023)
This amendment A1 modifies the European Standard EN IEC 62343-2-1:2019; it was approved by CENELEC on 2024-01-18. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62343-2-1:2019/A1:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62343-2-1:2020/A1:2024
EN IEC 62343-2-1:2019/A1:2024 (E)
European foreword
The text of document 86C/1868/CDV, future IEC 62343-2-1/AMD1, prepared by SC 86C "Fibre optic
systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 62343-2-1:2019/A1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-10-18
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-01-18
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62343-2-1:2019/AMD1:2023 was approved by CENELEC
as a European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62343-2-1:2020/A1:2024
IEC 62343-2-1
®
Edition 1.0 2023-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Dynamic modules –
Part 2-1: Reliability qualification – Test template
Modules dynamiques –
Partie 2-1: Qualification de fiabilité – Modèle d'essai
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.01 ISBN 978-2-8322-7981-6
Warning! Make sure that you obtained this publication f
...
SLOVENSKI STANDARD
SIST EN IEC 62343-2-1:2020/oprA1:2023
01-september-2023
Dinamični moduli - 2-1. del: Kvalifikacije zanesljivosti - Predloga za preverjanje -
Dopolnilo A1
Amendment 1 - Dynamic modules - Part 2-1: Reliability qualification - Test template
Dynamische Module - Teil 2-1: Zuverlässigkeitsnachweis - Prüfvorlage
Amendement 1 - Modules dynamiques - Partie 2-1: Qualification de fiabilité - Modèle
d'essai
Ta slovenski standard je istoveten z: EN IEC 62343-2-1:2019/prA1:2023
ICS:
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
SIST EN IEC 62343-2-1:2020/oprA1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62343-2-1:2020/oprA1:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 62343-2-1:2020/oprA1:2023
86C/1868/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62343-2-1/AMD1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-06-16 2023-09-08
SUPERSEDES DOCUMENTS:
86C/1844/CD, 86C/1861/CC
IEC SC 86C : FIBRE OPTIC SYSTEMS AND ACTIVE DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Fred Heismann
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Amendment 1 - Dynamic modules - Part 2-1: Reliability qualification - Test template
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
SIST EN IEC 62343-2-1:2020/oprA1:2023
IEC CDV 62343-2-1/A1/Ed1 © IEC:2023 – 2 – 86C/1868/CDV
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
3
4 DYNAMIC MODULES –
5
6 Part 2-1: Reliability qualification – Test template
7
8 AMENDMENT 1
9
10 FOREWORD
11 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
12 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
13 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
14 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
15 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
16 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
17 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
18 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
19 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
20 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
21 consensus of opinion on the relevant subjects since each technical committee has representation from all
22 interested IEC National Committees.
23 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
24 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
25 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.