iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61481:2002/A1:2003

(Amendment)

Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.

Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.

EN following parallel vote

Arbeiten unter Spannung - Phasenvergleicher für Wechselspannungen von 1 kV bis 36 kV

Travaux sous tension - Comparateurs de phase portatifs pour utilisation à des tensions alternatives de 1 kV à 36 kV

Delo pod napetostjo - Prenosni fazni primerjalniki za uporabo na napetostih od 1 kV do 36 kV izmenično (IEC 61481:2001/A1:2002)

General Information

Status
Withdrawn
Publication Date
31-Mar-2003
Withdrawal Date
16-Oct-2017
ICS
13.260 - Protection against electric shock. Live working
17.220.20 - Measurement of electrical and magnetic quantities
Technical Committee
DPN - Live Working
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Oct-2017
Due Date
09-Nov-2017
Completion Date
17-Oct-2017
Ref Project
EN 61481:2001/A1:2002 - Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.

Relations

Amends
SIST EN 61481:2002 - Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
Effective Date
01-Apr-2003
Replaced By
SIST EN 61481-1:2015 - Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kv a.c.
Effective Date
29-Jan-2023
Revises
SIST EN 61481-1:2015 - Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kv a.c.
Effective Date
07-Jun-2022
Revises
SIST EN 61481-2:2015 - Live working - Phase comparators -- Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
Effective Date
07-Jun-2022
Replaced By
SIST EN 61481-1:2015 - Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kv a.c.
Effective Date
01-Apr-2015
Replaced By
SIST EN 61481-2:2015 - Live working - Phase comparators -- Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
Effective Date
01-Apr-2015
Replaced By
SIST EN 61481-2:2015 - Live working - Phase comparators -- Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
Effective Date
29-Jan-2023
Amends
SIST EN 61481:2002 - Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
Effective Date
29-Jan-2023
Amends
SIST EN 61481:2002 - Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
Effective Date
07-Jun-2022

Buy Standard

EN 61481:2002/A1:2003EN 61481:2002/A1:2003
PreviousNext
Amendment
EN 61481:2002/A1:2003
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61481:2002/A1:2003
01-april-2003
'HORSRGQDSHWRVWMR3UHQRVQLID]QLSULPHUMDOQLNL]DXSRUDERQDQDSHWRVWLKRG
N9GRN9L]PHQLþQR ,(&$
Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
Arbeiten unter Spannung - Phasenvergleicher für Wechselspannungen von 1 kV bis 36
kV
Travaux sous tension - Comparateurs de phase portatifs pour utilisation à des tensions
alternatives de 1 kV à 36 kV
Ta slovenski standard je istoveten z: EN 61481:2001/A1:2002
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
SIST EN 61481:2002/A1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61481:2002/A1:2003

---------------------- Page: 2 ----------------------

SIST EN 61481:2002/A1:2003
EUROPEAN STANDARD EN 61481/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2002
ICS 13.260; 29.240; 29.260.99
English version
Live working -
Portable phase comparators for use on voltages
from 1 kV to 36 kV a.c.
(IEC 61481:2001/A1:2002)
Travaux sous tension - Arbeiten unter Spannung -
Comparateurs de phase portatifs Phasenvergleicher für
pour utilisation à des tensions Wechselspannungen
alternatives de 1 kV à 36 kV von 1 kV bis 36 kV
(CEI 61481:2001/A1:2002) (IEC 61481:2001/A1:2002)
This amendment A1 modifies the European Standard EN 61481:2001; it was approved by CENELEC on
2002-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61481:2001/A1:2002 E

---------------------- Page: 3 ----------------------

SIST EN 61481:2002/A1:2003
EN 61481:2001/A1:2002 - 2 -
Foreword
The text of document 78/427/FDIS, future amendment 1 to IEC 61481:2001, prepared by IEC TC 78,
Live working, was submitted to the IEC-CENELEC parallel vote and was appr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 61481-1:2015/AC:2018(Corrigendum)
Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
EN 61481-1:2014/AC:2015-09
  • Corrigendum
    1 page
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61481-1:2015(Main)
Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kv a.c.
EN 61481-1:2014

This part of IEC 61481 is applicable to portable phase comparators of capacitive type to be
used on electrical systems for voltages exceeding 1 kV a.c. and frequencies of 50 Hz and/or
60 Hz.
This standard is applicable to:
• single-pole phase comparators of capacitive type operating with a memory system up to
36 kV a.c.,
• two-pole phase comparators of capacitive type operating with a wireless connection up to
245 kV a.c.
This standard is applicable to phase comparators of capacitive type used in contact with the
bare conductive parts to be compared:
• as a complete device including its insulating element or
• as a separate device, adaptable to an insulating stick which, as a separate tool, is not
covered by this standard.
NOTE Some parts such as the contact electrode or the insulating element of a phase comparator as a complete
device may be dismantled.
Some restrictions on their use are applicable in the case of factory-assembled switchgear and
on overhead systems of electrified railways (see Annex A).
A device that is designed to provide other functions than phase comparison is a different
device and is not covered by this standard. For example a device designed to be also used as
a voltage detector is not covered by this standard (see Annex A).
Products designed and manufactured according to this standard contribute to the safety of
users provided they are used by persons trained for the work, in accordance with the hot stick
working method and the instructions for use.
Except when otherwise specified, all the voltages defined in this standard refer to phase-tophase
voltages of three-phase systems. In other systems, the applicable phase-to-phase or
phase-to-earth (ground) voltages should be used to determine the operating voltage

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61481-2:2015(Main)
Live working - Phase comparators -- Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
EN 61481-2:2014

This part of IEC 61481 is applicable to portable phase comparators of resistive type to be
used on electrical systems for voltages from 1 kV a.c. to 36 kV a.c. and frequencies of 50 Hz
and/or 60 Hz.
This standard is applicable to phase comparators of resistive type used in contact with the
bare conductive parts to be compared:
• as a complete device including its insulating element or
• as a separate device, adaptable to an insulating stick which, as a separate tool, is not
covered by this standard.
NOTE Some parts such as the contact electrode or the insulating element of a phase comparator as a complete
device may be dismantled.
Some restrictions on their use are applicable in the case of factory-assembled switchgear and
on overhead systems of electrified railways (see Annex A).
A device that is designed to provide other functions than phase comparison is a different
device and is not covered by this standard. For example a device designed to be also used as
a voltage detector is not covered by this standard (see Annex A).
Products designed and manufactured according to this standard contribute to the safety of the
users provided they are used by persons trained for the work, in accordance with the hot stick
working method and the instructions for use.
Except when otherwise specified, all the voltages defined in this standard refer to phase-tophase
voltages of three-phase systems. In other systems, the applicable phase-to-phase or
phase-to-earth (ground) voltages should be used to determine the operating voltage.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61481-1:2015/AC:2018(Corrigendum)
Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
EN 61481-1:2014/AC:2015-09
  • Corrigendum
    1 page
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60990:2017(Main)
Methods of measurement of touch current and protective conductor current
EN 60990:2016

This International Standard defines measurement methods for
– d.c. or a.c. current of sinusoidal or non-sinusoidal waveform, which could flow through the
human body, and
– current flowing through a protective conductor.
The measuring methods recommended for TOUCH CURRENT are based upon the possible
effects of current flowing through a human body. In this standard, measurements of current
through networks representing the impedance of the human body are referred to as
measurements of TOUCH CURRENT. These networks are not necessarily valid for the bodies of
animals.
The specification or implication of specific limit values is not within the scope of this standard.
IEC TS 60479 series provides information regarding the effects of current passing through
the human body from which limit values may be derived.
This standard is applicable to all classes of EQUIPMENT, according to IEC 61140.
The methods of measurement in this standard are not intended to be used for
– TOUCH CURRENTS having less than 1 s duration,
– patient currents as defined in IEC 60601-1,
– a.c. at frequencies below 15 Hz, and
– currents above those chosen for ELECTRIC BURN limits.
This basic safety publication is primarily intended for use by technical committees in the
preparation of standards in accordance with the principles laid down in IEC Guide 104 and
ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies
independent of product standards.
One of the responsibilities of a technical committee is, wherever applicable, to make use of
basic safety publications in the preparation of its publications. The requirements, test
methods or test conditions of this basic safety publication only apply when specifically
referred to or included in the relevant publications.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61481-1:2015(Main)
Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kv a.c.
EN 61481-1:2014

This part of IEC 61481 is applicable to portable phase comparators of capacitive type to be
used on electrical systems for voltages exceeding 1 kV a.c. and frequencies of 50 Hz and/or
60 Hz.
This standard is applicable to:
• single-pole phase comparators of capacitive type operating with a memory system up to
36 kV a.c.,
• two-pole phase comparators of capacitive type operating with a wireless connection up to
245 kV a.c.
This standard is applicable to phase comparators of capacitive type used in contact with the
bare conductive parts to be compared:
• as a complete device including its insulating element or
• as a separate device, adaptable to an insulating stick which, as a separate tool, is not
covered by this standard.
NOTE Some parts such as the contact electrode or the insulating element of a phase comparator as a complete
device may be dismantled.
Some restrictions on their use are applicable in the case of factory-assembled switchgear and
on overhead systems of electrified railways (see Annex A).
A device that is designed to provide other functions than phase comparison is a different
device and is not covered by this standard. For example a device designed to be also used as
a voltage detector is not covered by this standard (see Annex A).
Products designed and manufactured according to this standard contribute to the safety of
users provided they are used by persons trained for the work, in accordance with the hot stick
working method and the instructions for use.
Except when otherwise specified, all the voltages defined in this standard refer to phase-tophase
voltages of three-phase systems. In other systems, the applicable phase-to-phase or
phase-to-earth (ground) voltages should be used to determine the operating voltage

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61481-2:2015(Main)
Live working - Phase comparators -- Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
EN 61481-2:2014

This part of IEC 61481 is applicable to portable phase comparators of resistive type to be
used on electrical systems for voltages from 1 kV a.c. to 36 kV a.c. and frequencies of 50 Hz
and/or 60 Hz.
This standard is applicable to phase comparators of resistive type used in contact with the
bare conductive parts to be compared:
• as a complete device including its insulating element or
• as a separate device, adaptable to an insulating stick which, as a separate tool, is not
covered by this standard.
NOTE Some parts such as the contact electrode or the insulating element of a phase comparator as a complete
device may be dismantled.
Some restrictions on their use are applicable in the case of factory-assembled switchgear and
on overhead systems of electrified railways (see Annex A).
A device that is designed to provide other functions than phase comparison is a different
device and is not covered by this standard. For example a device designed to be also used as
a voltage detector is not covered by this standard (see Annex A).
Products designed and manufactured according to this standard contribute to the safety of the
users provided they are used by persons trained for the work, in accordance with the hot stick
working method and the instructions for use.
Except when otherwise specified, all the voltages defined in this standard refer to phase-tophase
voltages of three-phase systems. In other systems, the applicable phase-to-phase or
phase-to-earth (ground) voltages should be used to determine the operating voltage.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day