SIST EN 14187-2:2004

Cold applied joint sealants - Part 2:Test method for the determination of tack free time

This European Standard specifies a test method for determination of the tack free time for cold applied joint sealants for use in joints in roads, air fields and other exposed concrete pavements.

Kalt verarbeitbare Fugenmassen - Teil 2: Prüfverfahren zur Bestimmung der klebfreien Zeit

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung der klebfreien Zeit von kalt verarbeitbaren Fugenmassen, die für Fugen auf Straßen, Flugplätzen und anderen belasteten Betondecken verwendet werden.

Mastics pour joints appliqués a froid - Partie 2: Méthode d'essai pour la détermination du temps durcissement

La présente Norme européenne décrit une méthode d'essai pour la détermination du temps de polymérisation des mastics pour joints appliqués a froid, utilisés pour les routes, les pistes d'aviation et autres chaussées en béton a nu.

Hladno nanosljive tesnilne mase za stike – 2. del: Preskusna metoda za ugotavljanje časa nelepljivosti

General Information

• Status: Withdrawn
• Publication Date: 31-May-2004
• Withdrawal Date: 11-Apr-2017
• ICS: 91.100.50 - Binders. Sealing materials
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 11-Apr-2017
• Due Date: 04-May-2017
• Completion Date: 12-Apr-2017
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: EN 14187-2:2003 - Cold applied joint sealants - Part 2:Test method for the determination of tack free time

Relations

• Replaced By: SIST EN 14187-2:2017 - Cold applied joint sealants - Test methods - Part 2: Determination of tack free time
• Effective Date: 01-May-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kalt verarbeitbare Fugenmassen - Teil 2: Prüfverfahren zur Bestimmung der klebfreien ZeitMastics pour joints appliqués a froid - Partie 2: Méthode d'essai pour la détermination du temps durcissementCold applied joint sealants - Part 2:Test method for the determination of tack free time93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14187-2:2003SIST EN 14187-2:2004en01-junij-2004SIST EN 14187-2:2004SLOVENSKI
STANDARD



SIST EN 14187-2:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14187-2June 2003ICS 93.080.20English versionCold applied joint sealants - Part 2:Test method for thedetermination of tack free timeMastics pour joints appliqués à froid - Partie 2: Méthoded'essai pour la détermination du temps durcissementKalt verarbeitbare Fugenmassen - Teil 2: Prüfverfahren zurBestimmung der klebfreien ZeitThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14187-2:2003 ESIST EN 14187-2:2004



EN 14187-2:2003 (E)2ContentspageForeword.31Scope.32Normative references.33Terms and definitions.44Principle.45Apparatus.46Conditioning.47Procedure.48Test report.5SIST EN 14187-2:2004



EN 14187-2:2003 (E)3ForewordThis document (EN 14187-2:2003) has been prepared by Technical Committee CEN/TC 227 "Road materials", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by December 2003, and conflicting national standards shall be withdrawn at the latestby March 2005.This European Standard is one of a series of standards as listed below:EN 14187-1, Cold applied joint sealants — Part 1: Test method for the determination of the rate of cure.EN 14187-2, Cold applied joint sealants — Part 2: Test method for the determination of tack free time.EN 1418
...