SIST EN 10163-2:1997

Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 2: Plate and wide flats

This part 2 in addition to part 1 specifies the delivery requirements which apply to the surface quality of host-rolled plates and wide flats with thicknesses of 3 mm ? e ? 250 mm.  NOTE: For plate with a thickness > 250 mm special agreements should be made at the time of enquiry and order.

Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Stahlerzeugnissen (Blech, Breitflachstahl und Profile) - Teil 2: Blech und Breitflachstahl

Dieser Teil 2 enthält in Verbindung mit Teil 1 die Lieferbedingungen für die Oberfalächenbeschaffenheit von warmgewalztem Blech und Breitflachsthahl in Dicken von 3 mm <= e <= 250 mm.

Conditions de livraison relatives a l'état de surface des tôles, larges plats et profilés en acier laminés a chaud - Partie 2: Tôles et larges plats

La présente deuxieme partie complete la premiere partie en indiquant les prescriptions de qualité de surface des tôles et larges plats d'épaisseur comprise entre 3 mm <= e <= 250 mm inclus.

Dobavni pogoji za videz površine vroče valjane pločevine, ploščatega jekla in profilov - 2. del: Pločevine in ploščato jeklo

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 31-Jan-2005
• ICS: 77.140.50 - Flat steel products and semi-products
• ICS: 77.140.70 - Steel profiles
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Feb-2005
• Due Date: 01-Feb-2005
• Completion Date: 01-Feb-2005
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/BC/CEN/87/15 - ECISS - 2nd programme
• Ref Project: EN 10163-2:1991 - Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections - Part 2: Plate and wide flats

Relations

• Replaced By: SIST EN 10163-2:2005 - Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
• Effective Date: 01-Feb-2005

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Stahlerzeugnissen (Blech, Breitflachstahl und Profile) - Teil 2: Blech und BreitflachstahlConditions de livraison relatives a l'état de surface des tôles, larges plats et profilés en acier laminés a chaud - Partie 2: Tôles et larges platsDelivery requirements for surface condition of hot rolled steel plates, wide
...