SIST EN 336:2004
(Main)Structural timber - Sizes, permitted deviations
Structural timber - Sizes, permitted deviations
This standard specifies for structural timber and glued laminated timber test methods for the determination of dimensions, moisture content, density and conditioning of test pieces.
Bauholz für tragende Zwecke - Maße, zulässige Abweichnungen
Bois de structure - Dimensions, écarts admissibles
La présente norme définit deux classes d'écarts admissibles par rapport a des dimensions cibles de bois de structure pour les essences résineuses et feuillues
Elle définit également la teneur en humidité a utiliser comme référence pour la mesure des dimensions et donne les valeurs moyennes de variations dimensionnelles dues aux variations de teneurs en humidité.
Elle s'applique aux bois avivés sciés et ébauchés ayant des rives paralleles et des épaisseurs ou largeurs comprises entre 22 mm et 300 mm.
Konstrukcijski les - Mere, dovoljena odstopanja
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 336:2004
01-januar-2004
1DGRPHãþD
SIST EN 336:1996
Konstrukcijski les - Mere, dovoljena odstopanja
Structural timber - Sizes, permitted deviations
Bauholz für tragende Zwecke - Maße, zulässige Abweichnungen
Bois de structure - Dimensions, écarts admissibles
Ta slovenski standard je istoveten z: EN 336:2003
ICS:
79.040 Les, hlodovina in žagan les Wood, sawlogs and sawn
timber
SIST EN 336:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 336:2004
---------------------- Page: 2 ----------------------
SIST EN 336:2004
EUROPEAN STANDARD
EN 336
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2003
ICS 79.040 Supersedes EN 336:1995
English version
Structural timber - Sizes, permitted deviations
Bois de structure - Dimensions, écarts admissibles Bauholz für tragende Zwecke - Maße, zulässige
Abweichnungen
This European Standard was approved by CEN on 14 February 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 336:2003 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 336:2004
EN 336:2003 (E)
Contents
page
Foreword.3
Introduction .4
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Sizes for structural timber .5
4.1 General.5
4.2 Changes in size due to changes in moisture content.5
4.3 Permitted cross-sectional deviations .5
4.4 Permitted length deviations.5
5 Moisture content measurement.5
2
---------------------- Page: 4 ----------------------
SIST EN 336:2004
EN 336:2003 (E)
Foreword
This document EN 336:2003 has been prepared by Technical Committee CEN/TC 124 "Timber structures", the
secretariat of which is held by DS.
This Europ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.