SIST EN 2502:2020

Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Bars

This document specifies the requirements relating to: Steel X5CrNoMoCuNb14-5 (1.4594) 930 MPa ≤ Rm ≤ 1 080 MPa Bars De ≤ 150 mm.

Luft- und Raumfahrt - Stahl Acier X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Stangen - De ≤ 150 mm

Dieses Dokument legt die Anforderungen an:
Stahl X5CrNoMoCuNb14-5 (1.4594)
930 MPa ≤ Rm ≤ 1 080 MPa
Stangen
De ≤ 150 mm
für Anwendungen in der Luft- und Raumfahrt fest.
ASD-STAN-Bezeichnung: FE-PM66.

Série aérospatiale - Acier X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Barres

Le présent document spécifie les exigences relatives à :
Acier X5CrNoMoCuNb14-5 (1.4594)
930 MPa ≤ Rm ≤ 1 080 MPa
Barres
De ≤ 150 mm
pour applications aérospatiales.
Désignation ASD-STAN : FE-PM66.

Aeronavtika - Jeklo X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa - Palice

Ta dokument določa zahteve, ki se navezujejo na: jeklo X5CrNoMoCuNb14-5 (1.4594), 930 MPa ≤ Rm ≤ 1080 MPa, palice, De ≤ 150 mm.

General Information

• Status: Published
• Publication Date: 16-Dec-2019
• ICS: 49.025.10 - Steels
• ICS: 77.140.60 - Steel bars and rods
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 12-Dec-2019
• Due Date: 16-Feb-2020
• Completion Date: 17-Dec-2019
• Ref Project: EN 2502:2019 - Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Bars - De ≤ 150 mm

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2502:2020
01-februar-2020
Aeronavtika - Jeklo X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1080 MPa -
Palice
Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa -
Bars
Luft- und Raumfahrt - Stahl Acier X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1
080 MPa - Stangen - De ≤ 150 mm
Série aérospatiale - Acier X5CrNoMoCuNb14-5 (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa -
Barres
Ta slovenski standard je istoveten z: EN 2502:2019
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
SIST EN 2502:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2502:2020

---------------------- Page: 2 ----------------------
SIST EN 2502:2020
EN 2502
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2019
EUROPÄISCHE NORM
ICS 49.025.10
English Version
Aerospace series - Steel X5CrNoMoCuNb14-5 (1.4594) -
930 MPa ≤ Rm ≤ 1 080 MPa - Bars
Série aérospatiale - Acier X5CrNoMoCuNb14-5 Luft- und Raumfahrt - Stahl Acier X5CrNoMoCuNb14-5
(1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Barres (1.4594) - 930 MPa ≤ Rm ≤ 1 080 MPa - Stangen - De ≤
150 mm
This European Standard was approved by CEN on 4 February 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2502:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 2502:2020
EN 2502:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 8

2

---------------------- Page: 4 ----------------------
SIST EN 2502:2020
EN 2502:2019 (E)
European foreword
This document (EN 2502:2019) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text or by
endorsement, at the latest by June 2020, and conflicting national standards shall be withdrawn at the latest by
June 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia,
Romania, Serbia, Slovak
...