SIST EN 4628:2023
(Main)Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
This document specifies the requirements relating to:
Steel X4CrNiMo16-5-1 (1.4418)
Air melted
Hardened and tempered
Bars
De ≤ 200 mm
1 150 MPa ≤ Rm ≤ 1 300 MPa
for aerospace applications.
NOTE Other common designations:
- AIR: Z 8 CND 17-04.
- Only the chemical composition according to this document is considered.
Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 (1.4418) - Lufterschmolzen - Gehärtet- und angelassen - Stangen - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
Dieses Dokument legt die Anforderungen an:
Stahl X4CrNiMo16 5 1 (1.4418)
lufterschmolzen
gehärtet und angelassen
Stangen
De ≤ 200 mm
1 150 MPa ≤ Rm ≤ 1 300 MPa
für Anwendungen in der Luft und Raumfahrt fest.
ANMERKUNG Weitere übliche Bezeichnungen:
AIR: Z 8 CND 17 04.
Es wird nur die chemische Zusammensetzung in diesem Dokument berücksichtigt.
Série aérospatiale - Acier X4CrNiMo16-5-1 (1.4418) - Élaboré à l'air - Trempé et revenu - Barres - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
Le présent document spécifie les exigences relatives à :
Acier X4CrNiMo16-5-1 (1.4418)
Élaboré à l’air
Trempé et revenu
Barres
De ≤ 200 mm
1 150 MPa ≤ Rm ≤ 1 300 MPa
pour les applications aérospatiales.
NOTE Autres désignations communes :
- AIR : Z 8 CND 17-04.
- Seule la composition chimique selon le présent document est prise en compte.
Aeronavtika - Jeklo X4CrNiMo16-5-1 (1.4418) - Taljeno - Utrjeno in mehko žarjeno - Palice - De ≤ 200 mm - 1150 MPa ≤ Rm ≤ 1300 MPa
Ta dokument določa zahteve, ki se navezujejo na:
jeklo X4CrNiMo16-5-1 (1.4418),
taljeno,
utrjeno in mehko žarjeno,
palice,
De ≤ 200 mm,
1150 MPa ≤ Rm ≤ 1300 MPa,
za uporabo v aeronavtiki.
OPOMBA: Druge pogoste oznake:
– AIR: Z 8 CND 17-04.
– Upošteva se le kemijska sestava v skladu s tem dokumentom.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4628:2023
01-marec-2023
Nadomešča:
SIST EN 4628:2014
Aeronavtika - Jeklo X4CrNiMo16-5-1 (1.4418) - Taljeno - Utrjeno in mehko žarjeno -
Palice - De ≤ 200 mm - 1150 MPa ≤ Rm ≤ 1300 MPa
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and
tempered - Bars - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 (1.4418) - Lufterschmolzen - Gehärtet- und
angelassen - Stangen - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
Série aérospatiale - Acier X4CrNiMo16-5-1 (1.4418) - Élaboré à l'air - Trempé et revenu
- Barres - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
Ta slovenski standard je istoveten z: EN 4628:2022
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
SIST EN 4628:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4628:2023
---------------------- Page: 2 ----------------------
SIST EN 4628:2023
EN 4628
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 4628:2013
English Version
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air
melted - Hardened and tempered - Bars - D ≤ 200 mm - 1
e
150 MPa ≤ R ≤ 1 300 MPa
m
Série aérospatiale - Acier X4CrNiMo16-5-1 (1.4418) - Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 (1.4418)
Élaboré à l'air - Trempé et revenu - Barres - D ≤ 200 - Lufterschmolzen - Gehärtet- und angelassen - Stangen
e
mm - 1 150 MPa ≤ R ≤ 1 300 MPa - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
m
This European Standard was approved by CEN on 22 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
E U R OP ÄI S CHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4628:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4628:2023
EN 4628:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Requirements . 6
Bibliography . 10
2
---------------------- Page: 4 ----------------------
SIST EN 4628:2023
EN 4628:2022 (E)
European foreword
This document (EN 4628:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by June 2023, and conflicting national standards shall be withdrawn at
the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 4628:2013.
This document is a technical revision of EN 4628:2013.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 4628:2023
EN 4628:2022 (E)
Introduction
This document is part of the series of EN metallic material standards for aerospace applications.
The general organization of this series is described in EN 4258.
This document has been prepared in accordance with EN 4500-005.
4
---------------------- Page: 6
...
SLOVENSKI STANDARD
oSIST prEN 4628:2021
01-julij-2021
Aeronavtika - Jeklo X4CrNiMo16-5-1 (1.4418) - Taljeno - Utrjeno in mehko žarjeno -
Palica - De ≤ 200 mm - 1150 MPa ≤ Rm ≤ 1300 MPa
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and
tempered - Bar - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 Mpa
Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 (1.4418) - Lufterschmolzen - Gehärtet- und
angelassen - Stangen - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
Série aérospatiale - Acier X4CrNiMo16-5-1 (1.4418) - Élaboré à l'air - Trempé et revenu -
Barres - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
Ta slovenski standard je istoveten z: prEN 4628
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
oSIST prEN 4628:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4628:2021
---------------------- Page: 2 ----------------------
oSIST prEN 4628:2021
DRAFT
EUROPEAN STANDARD
prEN 4628
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2021
ICS 49.025.10 Will supersede EN 4628:2013
English Version
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air
melted - Hardened and tempered - Bar - De ≤ 200 mm - 1
150 MPa ≤ Rm ≤ 1 300 Mpa
Série aérospatiale - Acier X4CrNiMo16-5-1 (1.4418) - Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 (1.4418)
- Lufterschmolzen - Gehärtet- und angelassen - Stangen
Élaboré à l'air - Trempé et revenu - Barres - De ≤ 200
- De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4628:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4628:2021
prEN 4628:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Requirements . 6
Bibliography . 10
2
---------------------- Page: 4 ----------------------
oSIST prEN 4628:2021
prEN 4628:2021 (E)
European foreword
This document (prEN 4628:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document will supersede EN 4628:2013.
This document is a technical revision of EN 4628:2013.
This document is currently submitted to the CEN Enquiry.
3
---------------------- Page: 5 ----------------------
oSIST prEN 4628:2021
prEN 4628:2021 (E)
Introduction
This document is part of the series of EN metallic material standards for aerospace applications. The
general organization of this series is described in EN 4258.
This document has been prepared in accordance with EN 4500-005.
4
---------------------- Page: 6 ----------------------
oSIST prEN 4628:2021
prEN 4628:2021 (E)
1 Scope
This document specifies the requirements relating to:
— Steel X4CrNiMo16-5-1 (1.4418)
— Air melted
— Harde
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.