Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 1: Method of the horizontally folded specimen (ISO 2313-1:2021)

This document specifies a method for determining the angle of recovery of fabrics from creasing. The
results obtained by this method for textile fabrics of very different kinds cannot be compared directly.

Textilien - Bestimmung des Knittererholungsvermögens eines Prüflings durch Messung des Knittererholungswinkels - Teil 1: Verfahren mit horizontaler Faltenkante des Prüflings (ISO 2313-1:2021)

Dieses Dokument legt ein Verfahren zur Bestimmung des Knittererholungswinkels von textilen Flächengebilden fest. Die mit diesem Verfahren für unterschiedliche Arten textiler Flächengebilde erhaltenen Ergebnisse können nicht direkt miteinander verglichen werden.

Textiles - Détermination de l'auto-défroissabilité d'une éprouvette d'étoffe pliée, par mesurage de l'angle rémanent après pliage - Partie 1: Méthode de l'éprouvette pliée horizontalement (ISO 2313-1:2021)

Le présent document spécifie une méthode pour déterminer l’angle rémanent des étoffes après pliage. Les résultats obtenus selon cette méthode pour des étoffes textiles de types très différents ne peuvent pas être comparés directement.

Tekstilije - Določanje izkoristka prepognjenega vzorca tkanine z merjenjem kota predelave - 1. del: Metoda vodoravno zloženega vzorca (ISO 2313-1:2021)

General Information

Status
Published
Public Enquiry End Date
29-Sep-2020
Publication Date
27-Jun-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Jun-2021
Due Date
21-Aug-2021
Completion Date
28-Jun-2021

Relations

Buy Standard

Standard
EN ISO 2313-1:2021
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 2313-1:2020
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2313-1:2021
01-september-2021
Nadomešča:
SIST EN 22313:1999
Tekstilije - Določanje izkoristka prepognjenega vzorca tkanine z merjenjem kota
predelave - 1. del: Metoda vodoravno zloženega vzorca (ISO 2313-1:2021)
Textiles - Determination of the recovery from creasing of a folded specimen of fabric by
measuring the angle of recovery - Part 1: Method of the horizontally folded specimen
(ISO 2313-1:2021)
Textilien - Bestimmung des Knittererholungsvermögens eines Prüflings durch Messung
des Knittererholungswinkels - Teil 1: Verfahren mit horizontaler Faltenkante des Prüflings
(ISO 2313-1:2021)
Textiles - Détermination de l'auto-défroissabilité d'une éprouvette d'étoffe pliée, par
mesurage de l'angle rémanent après pliage - Partie 1: Méthode de l'éprouvette pliée
horizontalement (ISO 2313-1:2021)
Ta slovenski standard je istoveten z: EN ISO 2313-1:2021
ICS:
59.080.30 Tkanine Textile fabrics
SIST EN ISO 2313-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 2313-1:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 2313-1:2021


EN ISO 2313-1
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2021
EUROPÄISCHE NORM
ICS 59.080.30 Supersedes EN 22313:1992
English Version

Textiles - Determination of the recovery from creasing of a
folded specimen of fabric by measuring the angle of
recovery - Part 1: Method of the horizontally folded
specimen (ISO 2313-1:2021)
Textiles - Détermination de l'auto-défroissabilité d'une Textilien - Bestimmung des
éprouvette d'étoffe pliée, par mesurage de l'angle Knittererholungsvermögens eines Prüflings durch
rémanent après pliage - Partie 1: Méthode de Messung des Knittererholungswinkels - Teil 1:
l'éprouvette pliée horizontalement (ISO 2313-1:2021) Verfahren mit horizontaler Faltenkante des Prüflings
(ISO 2313-1:2021)
This European Standard was approved by CEN on 18 May 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2313-1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 2313-1:2021
EN ISO 2313-1:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 2313-1:2021
EN ISO 2313-1:2021 (E)
European foreword
This document (EN ISO 2313-1:2021) has been prepared by Technical Committee ISO/TC 38 "Textiles"
in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2021, and conflicting national standards
shall be withdrawn at the latest by December 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 22313:1992.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 2313-1:2021 has been approved by CEN as EN ISO 2313-1:2021 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 2313-1:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 2313-1:2021
INTERNATIONAL ISO
STANDARD 2313-1
First edition
2021-05
Textiles — Determination of the
recovery from creasing of a folded
specimen of fabric by measuring the
angle of recovery —
Part 1:
Method of the horizontally folded
specimen
Textiles — Détermination de l’auto-défroissabilité d’une éprouvette
d’étoffe pliée, par mesurage de l’angle rémanent après pliage —
Partie 1: Méthode de l'éprouvette pliée horizontalement
Reference number
ISO 2313-1:2021(E)
©
ISO 2021

---------------------- Page: 7 ----------------------
SIST EN ISO 2313-1:2021
ISO 2313-1:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 2313-1:2021
ISO 2313-1:2021(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Sampling and preparation of specimens . 3
7 Atmosphere for conditioning and testing . 4
8 Test procedure . 4
8.1 General conditions . 4
8.2 Loading . 4
8.3 Measurement of the crease recovery angle . 5
9 Expression of results . 5
10 Test report . 5
© ISO 2021 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 2313-1:2021
ISO 2313-1:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
...

SLOVENSKI STANDARD
oSIST prEN ISO 2313-1:2020
01-september-2020
Tekstilije - Določanje izkoristka prepognjenega vzorca tkanine z merjenjem kota
predelave - 1. del: Metoda vodoravno zloženega vzorca (ISO/DIS 2313-1:2020)
Textiles - Determination of the recovery from creasing of a folded specimen of fabric by
measuring the angle of recovery - Part 1: Method of the horizontally folded specimen
(ISO/DIS 2313-1:2020)
Textilien - Bestimmung des Knittererholungsvermögens eines Prüflings durch Messung
des Knittererholungswinkels - Teil 1: Verfahren mit horizontaler Faltenkante des
Prüflings (ISO/DIS 2313-1:2020)
Textiles - Détermination de l'auto-défroissabilité d'une éprouvette d'étoffe pliée, par
mesurage de l'angle rémanent après pliage - Partie 1: Méthode de l'éprouvette pliée
horizontalement (ISO/DIS 2313-1:2020)
Ta slovenski standard je istoveten z: prEN ISO 2313-1
ICS:
59.080.30 Tkanine Textile fabrics
oSIST prEN ISO 2313-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 2313-1:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 2313-1:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 2313-1
ISO/TC 38/SC 24 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2020-06-16 2020-09-08
Textiles — Determination of the recovery from creasing
of a folded specimen of fabric by measuring the angle of
recovery —
Part 1:
Method of the horizontally folded specimen
Textiles — Détermination de l'auto-définissabilité d'une éprouvette pliée par mesure de l'angle rémanent
après pliage —
Partie 1: Méthode de l'éprouvette pliée horizontalement
ICS: 59.080.30
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 2313-1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
oSIST prEN ISO 2313-1:2020
ISO/DIS 2313-1:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 2313-1:2020
ISO/DIS 2313-1:2020(E)

Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Sampling and preparation of test specimens . 3
7 Atmosphere for conditioning and testing . 4
8 Procedure. 4
8.1 General conditions . 4
8.2 Loading . 4
8.3 Measurement of the crease recovery angle . 5
9 Expression of results . 5
10 Test report . 5
© ISO 2020 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 2313-1:2020
ISO/DIS 2313-1:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.
The committee responsible for this document is Technical Committee ISO/TC 38, Textiles, Subcommittee
SC 24, Conditioning atmospheres and physical tests for textile fabrics.
This second edition cancels and replaces the first edition (ISO 2313:1972), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— changing the title as one part of ISO 2313, i.e. from “Textile fabrics — Determination of the recovery
from creasing of a horizontally folded specimen by measuring the angle of recovery” to “Textiles —
Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of
recovery — Part 1: Method of the horizontally folded specimen”;
— changing the normative reference ISO/R 139 to ISO 139;
— adding the tolerance of the load on the specimen in 5.1 a);
— redrafting the description about "Sampling and preparation of test specimens” to improve clarity of
meaning in clause 6 (former clause 6 and clause 7);
— revising the distance from the selvedge while taking the specimen, i.e. from “not less than 50 mm”
to “not less than 150 mm” in 6.2 (former 7.1);
— revising the requirement of atmosphere for conditioning and testing according to ISO 139 in clause
7 (former 7.4);
— giving two crease recovery angles, i.e. “rapid crease recovery angle” obtained at 15 s after removal of
the creasing load, and “delay crease recovery angle” obtained at 5 min after removal of the creasing
load in clause 3 and in 8.3.
— revising result expression from “Calculate the mean value to the nearest degree” to “Calculate the
mean value rounded off to one decimal place” in clause 9.
A list of all parts in the ISO 2313 series can be found on the ISO website.
iv © ISO 2020 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 2313-1:2020
ISO/DIS 2313-1:2020(E)

Any feedback or
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.