SIST EN 958:2024
(Main)Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods
Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods
This document specifies safety requirements and test methods for energy absorbing systems (EAS) for use in climbing on a via ferrata according to EN 16869:2017, for users over 14 years old weighing not less than 40 kg (total weight without equipment) and no more than 120 kg (total weight including the equipment).
NOTE This document is one of a package of standards for mountaineering equipment, see Annex A.
Bergsteigerausrüstung - Fangstoßdämpfer für die Verwendung auf Klettersteigen (Via Ferrata) - Sicherheitstechnische Anforderungen und Prüfverfahren
Dieses Dokument legt sicherheitstechnische Anforderungen und Prüfverfahren für Fangstoßdämpfer (EAS, en: energy absorbing systems) fest zur Anwendung beim Klettern auf einem Klettersteig nach EN 16869:2017 für Anwender älter als 14 Jahre, die nicht weniger als 40 kg (Gesamtgewicht ohne Ausrüstung) und nicht mehr als 120 kg (Gesamt¬gewicht einschließlich Ausrüstung) wiegen.
ANMERKUNG Dieses Dokument ist eine aus der Normenreihe für Bergsteigerausrüstung, siehe Anhang A.
Équipement d'alpinisme et d'escalade - Systèmes absorbeurs d'énergie utilisés en via ferrata - Exigences de sécurité et méthodes d'essai
Le présent document spécifie les exigences relatives à la sécurité et les méthodes d'essai pour les systèmes absorbeurs d'énergie (SAE) destinés à être utilisés pour l'escalade sur une via ferrata conformément à l'EN 16869:2017, pour les utilisateurs de plus de 14 ans, pesant au moins 40 kg (poids total sans l'équipement) et au plus 120 kg (poids total incluant l'équipement).
NOTE Le présent document fait partie d'une série de normes relatives à l'équipement d'alpinisme et d'escalade (voir l'Annexe A).
Gorniška oprema - Sistemi za absorpcijo energije pri zahtevnem varovanem planinstvu (via ferrata) - Varnostne zahteve in preskusne metode
Ta dokument določa varnostne zahteve in preskusne metode za sisteme za absorpcijo energije (EAS) pri zahtevnem varovanem planinstvu (via ferrata) v skladu s standardom EN 16869:2017, za uporabnike, starejše od 14 let, s težo med 40 kg (skupna teža brez opreme) in 120 kg (skupna teža z opremo).
OPOMBA: Ta dokument je eden od sklopov standardov za gorniško opremo (glej dodatek A).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Nadomešča:
SIST EN 958:2017
Gorniška oprema - Sistemi za absorpcijo energije pri zahtevnem varovanem
planinstvu (via ferrata) - Varnostne zahteve in preskusne metode
Mountaineering equipment - Energy absorbing systems for use in klettersteig (via
ferrata) climbing - Safety requirements and test methods
Bergsteigerausrüstung - Fangstoßdämpfer für die Verwendung auf Klettersteigen (Via
Ferrata) - Sicherheitstechnische Anforderungen und Prüfverfahren
Équipement d'alpinisme et d'escalade - Systèmes absorbeurs d'énergie utilisés en via
ferrata - Exigences de sécurité et méthodes d'essai
Ta slovenski standard je istoveten z: EN 958:2024
ICS:
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 958
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2024
EUROPÄISCHE NORM
ICS 97.220.40 Supersedes EN 958:2017
English Version
Mountaineering equipment - Energy absorbing systems for
use in klettersteig (via ferrata) climbing - Safety
requirements and test methods
Équipement d'alpinisme et d'escalade - Systèmes Bergsteigerausrüstung - Fangstoßdämpfer für die
absorbeurs d'énergie utilisés en via ferrata - Exigences Verwendung auf Klettersteigen (Via Ferrata) -
de sécurité et méthodes d'essai Sicherheitstechnische Anforderungen und
Prüfverfahren
This European Standard was approved by CEN on 19 May 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 958:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Safety requirements . 7
4.1 Design . 7
4.1.1 Construction . 7
4.1.2 Connecting device . 8
4.1.3 Connection to the safety line . 8
4.1.4 Initial arrangement . 8
4.1.5 Rest attachment point . 8
4.2 Operation of the EAS . 8
4.2.1 General . 8
4.2.2 Force to initiate operation . 9
4.2.3 Dynamic performance . 9
4.2.4 Dynamic strength of the EAS under wet conditions . 9
4.3 Static strength of the energy absorbing system . 9
4.3.1 General . 9
4.3.2 Static strength of the whole system . 10
4.3.3 Breaking strength of the components of elasticated arms . 10
4.3.4 Breaking strength of the textile components of non-elasticated arms and harness
attachment point . 10
4.3.5 Energy absorber initiation force . 10
4.3.6 Breaking strength of the rest attachment point . 10
5 Test methods . 10
5.1 Design . 10
5.1.1 General . 10
5.1.2 Measurement of the distance between the two arm extremities . 10
5.1.3 Measurement of the overall length of the EAS . 10
5.1.4 Elastic arm static elongation method . 11
5.2 Operation tests . 11
5.2.1 General . 11
5.2.2 Conditioning and test conditions for energy absorbing systems with textile
components . 11
5.2.3 Apparatus . 11
5.2.4 Dynamic strength tests . 14
5.3 Static strength and fatigue tests . 16
5.3.1 Determination of static strength of the whole system . 16
5.3.2 Fatigue test for elasticated arms . 16
5.3.3 Breaking strength of the textile components of non-elasticated arms . 17
5.3.4 Breaking test of the rest attachment point . 17
6 Marking . 18
7 Manufacturer's instructions and information . 18
Annex A (informative) Standards on mountaineering equipment . 20
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 aimed to be covered . 22
Bibliography . 23
European foreword
This document (EN 958:2024) has been prepared by Technical Committee CEN/TC 136 “Sports,
playground and other recreational facilities and equipment”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2024, and conflicting national standards shall
be withdrawn at the latest by December 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 958:2017.
a) in the scope, energy absorbing systems (EAS) according to this document have been limited to users
weighing not less than 40 kg (total weight without equipment) and no more than 120 kg (total weight
including the equipment) and the use is limited on via ferrata according to EN 16869:2017;
b) modification of the maximum impact force in 4.2.3 a);
c) modification of the mass in 4.2.3 b);
d) modification of the test apparatus and the test method for the dynamic performance;
e) the manufacturer’s instructions and information take into account the previous modifications, the
EAS disinfection and the progression in a rope party is also recommended for children.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document specifies safety requirements and test methods for energy absorbing systems (EAS) for
use on suitable via ferrata (e.g. EN 16869:2017), for users weighing not less than 40 kg (total weight
without equipment) and no more than 120 kg (total weight including the equipment).
NOTE This document is one of a package of standards for mountaineering equipment, see Annex A.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 565:2017, Mountaineering equipment — Tape — Safety requirements and test methods
EN 892:2012+A3:2023, Mountaineering equipment — Dynamic mountaineering ropes — Safety
requirements and test methods
EN 1891:1998, Personal protective equipment for the prevention of falls from a height — Low stretch
kernmantel ropes
EN 12275:2013, Mountaineering equipment — Connectors — Safety requirements and test methods
EN ISO 2307:2019, Fibre ropes — Determination of certain physical and mechanical properties
(ISO 2307:2019)
ISO 6487:2015 , Road vehicles — Measurement techniques in impact tests — Instrumentation
ISO 7000:2019, Graphical symbols for use on equipment — Registered symbols
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
via ferrata
route, generally on rocky terrain, consisting of a fixed climbing installation including a safety line where
the user is not supervised
[SOURCE: EN 16869:2017, 3.1]
Note 1 to entry: The mere presence of a wire cable/rope on a mountain route does not constitute a via ferrata
(e.g. Hörnli Ridge on Matterhorn).
3.2
safety line
flexible or rigi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.