SIST EN 300 296-2 V1.2.1:2009

• Abstract:

  The present document covers the minimum characteristics considered necessary in order to avoid harmful interference and to make acceptable use of the available frequencies. The present document applies to equipment with integral antennas, used in angle modulation systems in the land mobile service, operating on radio frequencies between 30 MHz and 1 000 MHz, with channel separations of 12,5 kHz, 20 kHz and 25 kHz, and is intended primarily for analogue speech. In the present document different requirements are given for the different radio frequency bands, channel separations, environmental conditions and types of equipment, where appropriate. The present document is complementary to EN 300 086 [i.4], which covers radio equipment with an internal or external RF connector, for use in the land mobile service.

• Status: Published
• Public Enquiry End Date: 31-Oct-2008
• Publication Date: 02-Apr-2009
• ICS: 33.060.99 - Other equipment for radiocommunications
• ICS: 33.070.01 - Mobile services in general
• ICS: 33.100.01 - Electromagnetic compatibility in general
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Mar-2009
• Due Date: 18-May-2009
• Completion Date: 03-Apr-2009
• Directive: 1999/5/EC - Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity
• Directive:

  ---

  2005-01-1864 - Pravilnik o radijskih frekvencah, ki se smejo uporabljati brez odločbe o dodelitvi radijskih frekvenc
• Mandate: M/284
• Ref Project: ETSI EN 300 296-2 V1.2.1 (2009-02) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

Overview

SIST EN 300 296-2 V1.2.1:2009 is a harmonized European standard addressing the essential requirements for electromagnetic compatibility (EMC) and radio spectrum matters (ERM) for land mobile service radio equipment using integral antennas, primarily intended for analogue speech. Developed by the Slovenian Institute for Standardization (SIST) and aligned with ETSI requirements, this standard ensures equipment operates effectively within radio frequency bands from 30 MHz to 1,000 MHz, while minimizing harmful interference and supporting efficient use of the radio spectrum.

This document specifically covers the requirements under Article 3.2 of the R&TTE Directive and complements EN 300 296-1, which specifies the technical characteristics and methods of measurement for such devices.

Key Topics

SIST EN 300 296-2 V1.2.1:2009 sets forth minimum requirements to:

• Prevent harmful radio interference: Protecting other electronic communications and users from disruptive interference.
• Optimize spectrum usage: Ensuring efficient and fair use of the available radio frequencies.
• Address different RF bands and channel separations: Covering devices with channel separations of 12.5 kHz, 20 kHz, and 25 kHz.
• Ensure equipment reliability: Establishing operational requirements under various environmental conditions.

Core Requirements

Key areas covered by this standard include:

• Transmitter Requirements: Frequency accuracy, effective radiated power, maximum frequency deviation, adjacent and alternate channel power, and limiting spurious emissions.
• Receiver Requirements: Sensitivity, co-channel rejection, adjacent channel selectivity, spurious response rejection, intermodulation response rejection, blocking/desensitization, and spurious radiation limits.
• Testing and Compliance: Includes measurement methodologies, acceptable uncertainty levels, and essential/conformance test suites to demonstrate compliance.

Applications

This standard is essential for manufacturers, test laboratories, and users of:

• Land mobile radios with integrated antennas designed primarily for analogue voice communication.
• Professional Mobile Radio (PMR) equipment such as walkie-talkies, dispatch radios, and similar two-way communication devices operating within 30 MHz to 1,000 MHz.
• Devices used in public safety, transport, logistics, and utilities, where reliable analogue voice transmission is critical.

By adhering to SIST EN 300 296-2, manufacturers can:

• Ensure regulatory compliance: Meet the essential requirements of the R&TTE Directive for market access in the European Union.
• Demonstrate EMC and radio spectrum compatibility: Minimize the risk of causing or being affected by interference.
• Streamline product certification: Use harmonized test methods for conformity assessment.

Related Standards

To achieve full conformity and best practices in land mobile communications, consider these related documents:

• EN 300 296-1: Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land Mobile Service; Radio equipment using integral antennas; Technical characteristics and methods of measurement.
• EN 300 086: Requirements for land mobile radio equipment with internal or external RF connectors primarily for analogue speech.
• TR 100 028: Guidance on measurement uncertainties for mobile radio equipment.
• Directive 1999/5/EC (R&TTE Directive): Legal framework for placing radio and telecommunications terminal equipment on the market in the EU.

Keywords: electromagnetic compatibility, radio spectrum management, analogue land mobile service, integral antenna, EMC, ERM, R&TTE Directive, harmonized standard, channel separation, radio equipment compliance, PMR, land mobile radio.

By following SIST EN 300 296-2 V1.2.1:2009, stakeholders can ensure the safe, reliable, and compliant operation of analogue speech radio equipment within the land mobile service, supporting a robust wireless communication environment.

Draft ETSI EN 300 296-2 V1.2.1 (2008-07)
Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land Mobile Service;
Radio equipment using integral antennas
intended primarily for analogue speech;
Part 2: Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive

2 Draft ETSI EN 300 296-2 V1.2.1 (2008-07)

Reference
REN/ERM-TGDMR-272-2
Keywords
analogue, mobile, PMR, radio, regulation, speech
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 Draft ETSI EN 300 296-2 V1.2.1 (2008-07)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .5
1 Scope.6
2 References.6
2.1 Normative references.6
2.2 Informative references.7
3 Definitions, symbols and abbreviations .7
3.1 Definitions.7
3.2 Symbols.7
3.3 Abbreviations.7
4 Technical specifications .7
4.1 Environmental profile.7
4.2 Transmitter requirements.7
4.2.1 Frequency error.7
4.2.1.1 Definition.7
4.2.1.2 Limit.8
4.2.1.3 Methods of measurement.8
4.2.2 Effective radiated power.8
4.2.2.1 Definition.8
4.2.2.2 Limit.8
4.2.2.3 Methods of measurement.8
4.2.3 Maximum permissible frequency deviation.8
4.2.3.1 Definition.8
4.2.3.2 Limit.8
4.2.3.3 Methods of measurement.8
4.2.4 Adjacent and alternate channel power .8
4.2.4.1 Definition.8
4.2.4.2 Limit.8
4.2.4.3 Methods of measurement.8
4.2.5 Radiated unwanted emissions in the spurious domain.8
4.2.5.1 Definition.8
4.2.5.2 Limit.9
4.2.5.3 Methods of measurement.9
4.3 Receiver requirements.9
4.3.1 Average usable sensitivity (field strength, speech).9
4.3.1.1 Definition.9
4.3.1.2 Limit.9
4.3.1.3 Method of measurement.9
4.3.2 Co-channel rejection.9
4.3.2.1 Definition.9
4.3.2.2 Limit.9
4.3.2.3 Method of measurement.9
4.3.3 Adjacent channel selectivity .9
4.3.3.1 Definition.9
4.3.3.2 Limit.9
4.3.3.3 Method of measurement.9
4.3.4 Spurious response rejection .10
4.3.4.1 Definition.10
4.3.4.2 Limit.10
4.3.4.3 Method of measurement.10
4.3.5 Intermodulation response rejection.10
4.3.5.1 Definition.10
ETSI
4 Draft ETSI EN 300 296-2 V1.2.1 (2008-07)
4.3.5.2 Limit.10
4.3.5.3 Method of measurement.10
4.3.6 Blocking or desensitization.10
4.3.6.1 Definition.10
4.3.6.2 Limit.10
4.3.6.3 Method of measurement.10
4.3.7 Spurious radiations.10
4.3.7.1 Definition.10
4.3.7.2 Limit.10
4.3.7.3 Method of measurement.10
5 Testing for compliance with technical requirements.11
5.1 Environmental conditions for testing .11
5.1.1 Normal and extreme test-conditions .11
5.1.2 Test power source .11
5.1.3 Choice of samples for test suites.11
5.2 Interpretation of the measurement results .11
5.3 Essential radio test suites.11
5.3.1 Frequency error.11
5.3.2 Effective radiated power.11
5.3.3 Maximum frequency deviation.12
5.3.4 Adjacent and alternate channel power .12
5.3.5 Radiated unwanted emission in the spurious domain .12
5.3.6 Spurious radiations.12
5.4 Other test specifications.12
5.4.1 Average usable sensitivity (speech, field strength).12
5.4.2 Co-channel rejection.12
5.4.3 Adjacent channel selectivity .12
5.4.4 Spurious response rejection .12
5.4.5 Intermodulation response rejection.12
5.4.6 Blocking or desensitization.12
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT).13
Annex B (informative): The EN title in the official languages .15
History .16

ETSI
5 Draft ETSI EN 300 296-2 V1.2.1 (2008-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Public Enquiry phase
of the ETSI standards Two-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations [i.2].
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [i.1].
Technical specifications relevant to Directive 1999/5/EC [i.1] are given in annex A.
The present document is part 2 of a multi-part deliverable covering the Land Mobile Service; Radio equipment using
integral antennas intended primarily for analogue speech, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive".

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The
modular structure is shown in EG 201 399 [i.3].
ETSI
6 Draft ETSI EN 300 296-2 V1.2.1 (2008-07)
1 Scope
The present document covers the minimum characteristics considered necessary in order to avoid harmful interference
and to make acceptable use of the available frequencies.
The present document applies to equipment with integral antennas, used in angle modulation systems in the land mobile
service, operating on radio frequen
...

Final draft ETSI EN 300 296-2 V1.2.1 (2008-12)
Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land Mobile Service;
Radio equipment using integral antennas
intended primarily for analogue speech;
Part 2: Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive

2 Final draft ETSI EN 300 296-2 V1.2.1 (2008-12)

Reference
REN/ERM-TGDMR-272-2
Keywords
analogue, mobile, PMR, radio, regulation, speech
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 Final draft ETSI EN 300 296-2 V1.2.1 (2008-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Technical specifications . 7
4.1 Environmental profile . 7
4.2 Transmitter requirements . 7
4.2.1 Frequency error . 7
4.2.1.1 Definition . 7
4.2.1.2 Limit . 7
4.2.1.3 Methods of measurement . 7
4.2.2 Effective radiated power . 8
4.2.2.1 Definition . 8
4.2.2.2 Limit . 8
4.2.2.3 Methods of measurement . 8
4.2.3 Maximum permissible frequency deviation . 8
4.2.3.1 Definition . 8
4.2.3.2 Limit . 8
4.2.3.3 Methods of measurement . 8
4.2.4 Adjacent and alternate channel power . 8
4.2.4.1 Definition . 8
4.2.4.2 Limit . 8
4.2.4.3 Methods of measurement . 8
4.2.5 Radiated unwanted emissions in the spurious domain . 8
4.2.5.1 Definition . 8
4.2.5.2 Limit . 8
4.2.5.3 Methods of measurement . 8
4.3 Receiver requirements . 9
4.3.1 Average usable sensitivity (field strength, speech) . 9
4.3.1.1 Definition . 9
4.3.1.2 Limit . 9
4.3.1.3 Method of measurement . 9
4.3.2 Co-channel rejection . 9
4.3.2.1 Definition . 9
4.3.2.2 Limit . 9
4.3.2.3 Method of measurement . 9
4.3.3 Adjacent channel selectivity . 9
4.3.3.1 Definition . 9
4.3.3.2 Limit . 9
4.3.3.3 Method of measurement . 9
4.3.4 Spurious response rejection . 9
4.3.4.1 Definition . 9
4.3.4.2 Limit . 9
4.3.4.3 Method of measurement . 10
4.3.5 Intermodulation response rejection . 10
4.3.5.1 Definition . 10
ETSI
4 Final draft ETSI EN 300 296-2 V1.2.1 (2008-12)
4.3.5.2 Limit . 10
4.3.5.3 Method of measurement . 10
4.3.6 Blocking or desensitization . 10
4.3.6.1 Definition . 10
4.3.6.2 Limit . 10
4.3.6.3 Method of measurement . 10
4.3.7 Spurious radiations . 10
4.3.7.1 Definition . 10
4.3.7.2 Limit . 10
4.3.7.3 Method of measurement . 10
5 Testing for compliance with technical requirements . 11
5.1 Environmental conditions for testing . 11
5.1.1 Normal and extreme test-conditions . 11
5.1.2 Test power source . 11
5.1.3 Choice of samples for test suites . 11
5.2 Interpretation of the measurement results . 11
5.3 Essential radio test suites . 11
5.3.1 Frequency error . 11
5.3.2 Effective radiated power . 11
5.3.3 Maximum frequency deviation . 12
5.3.4 Adjacent and alternate channel power . 12
5.3.5 Radiated unwanted emission in the spurious domain . 12
5.3.6 Spurious radiations . 12
5.4 Other test specifications . 12
5.4.1 Average usable sensitivity (speech, field strength) . 12
5.4.2 Co-channel rejection . 12
5.4.3 Adjacent channel selectivity . 12
5.4.4 Spurious response rejection . 12
5.4.5 Intermodulation response rejection . 12
5.4.6 Blocking or desensitization . 12
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 13
Annex C (informative): Bibliography . 16
History . 17

ETSI
5 Final draft ETSI EN 300 296-2 V1.2.1 (2008-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards Two-step Approval Procedure.
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations [i.2].
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [i.1].
Technical specifications relevant to Directive 1999/5/EC [i.1] are given in annex A.
The present document is part 2 of a multi-part deliverable covering the Land Mobile Service; Radio equipment using
integral antennas intended primarily for analogue speech, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive".

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The
modular structure is shown in EG 201 399 [i.3].
ETSI
6 Final draft ETSI EN 300 296-2 V1.2.1 (2008-12)
1 Scope
The present document covers the minimum characteristics considered necessary in order to avoid harmful interference
and to make acceptable use of the available frequencies.
The present document applies to equipment with integral a
...

Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land Mobile Service;
Radio equipment using integral antennas
intended primarily for analogue speech;
Part 2: Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive

2 ETSI EN 300 296-2 V1.2.1 (2009-02)

Reference
REN/ERM-TGDMR-272-2
Keywords
analogue, mobile, PMR, radio, regulation, speech
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 300 296-2 V1.2.1 (2009-02)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .5
1 Scope.6
2 References.6
2.1 Normative references.6
2.2 Informative references.6
3 Definitions, symbols and abbreviations .7
3.1 Definitions.7
3.2 Symbols.7
3.3 Abbreviations.7
4 Technical specifications .7
4.1 Environmental profile.7
4.2 Transmitter requirements.7
4.2.1 Frequency error.7
4.2.1.1 Definition.7
4.2.1.2 Limit.7
4.2.1.3 Methods of measurement.7
4.2.2 Effective radiated power.8
4.2.2.1 Definition.8
4.2.2.2 Limit.8
4.2.2.3 Methods of measurement.8
4.2.3 Maximum permissible frequency deviation.8
4.2.3.1 Definition.8
4.2.3.2 Limit.8
4.2.3.3 Methods of measurement.8
4.2.4 Adjacent and alternate channel power .8
4.2.4.1 Definition.8
4.2.4.2 Limit.8
4.2.4.3 Methods of measurement.8
4.2.5 Radiated unwanted emissions in the spurious domain.8
4.2.5.1 Definition.8
4.2.5.2 Limit.8
4.2.5.3 Methods of measurement.8
4.3 Receiver requirements.9
4.3.1 Average usable sensitivity (field strength, speech).9
4.3.1.1 Definition.9
4.3.1.2 Limit.9
4.3.1.3 Method of measurement.9
4.3.2 Co-channel rejection.9
4.3.2.1 Definition.9
4.3.2.2 Limit.9
4.3.2.3 Method of measurement.9
4.3.3 Adjacent channel selectivity .9
4.3.3.1 Definition.9
4.3.3.2 Limit.9
4.3.3.3 Method of measurement.9
4.3.4 Spurious response rejection .9
4.3.4.1 Definition.9
4.3.4.2 Limit.9
4.3.4.3 Method of measurement.10
4.3.5 Intermodulation response rejection.10
4.3.5.1 Definition.10
ETSI
4 ETSI EN 300 296-2 V1.2.1 (2009-02)
4.3.5.2 Limit.10
4.3.5.3 Method of measurement.10
4.3.6 Blocking or desensitization.10
4.3.6.1 Definition.10
4.3.6.2 Limit.10
4.3.6.3 Method of measurement.10
4.3.7 Spurious radiations.10
4.3.7.1 Definition.10
4.3.7.2 Limit.10
4.3.7.3 Method of measurement.10
5 Testing for compliance with technical requirements.11
5.1 Environmental conditions for testing .11
5.1.1 Normal and extreme test-conditions .11
5.1.2 Test power source .11
5.1.3 Choice of samples for test suites.11
5.2 Interpretation of the measurement results .11
5.3 Essential radio test suites.11
5.3.1 Frequency error.11
5.3.2 Effective radiated power.11
5.3.3 Maximum frequency deviation.12
5.3.4 Adjacent and alternate channel power .12
5.3.5 Radiated unwanted emission in the spurious domain .12
5.3.6 Spurious radiations.12
5.4 Other test specifications.12
5.4.1 Average usable sensitivity (speech, field strength).12
5.4.2 Co-channel rejection.12
5.4.3 Adjacent channel selectivity .12
5.4.4 Spurious response rejection .12
5.4.5 Intermodulation response rejection.12
5.4.6 Blocking or desensitization.12
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).13
Annex C (informative): Bibliography.16
History .17

ETSI
5 ETSI EN 300 296-2 V1.2.1 (2009-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations [i.2].
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [i.1].
Technical specifications relevant to Directive 1999/5/EC [i.1] are given in annex A.
The present document is part 2 of a multi-part deliverable covering the Land Mobile Service; Radio equipment using
integral antennas intended primarily for analogue speech, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive".

National transposition dates
Date of adoption of this EN: 9 February 2009
Date of latest announcement of this EN (doa): 31 May 2009
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 November 2009
Date of withdrawal of any conflicting National Standard (dow): 30 November 2010

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The
modular structure is shown in EG 201 399 [i.3].
ETSI
6 ETSI EN 300 296-2 V1.2.1 (2009-02)
1 Scope
The present document covers the minimum characteristics considered necessary in order to avoid harmful interference
and to make acceptable use of the available frequencies.
The present document applies to equipment with integral
...

SLOVENSKI STANDARD
01-maj-2009
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
6WRULWHYNRSHQVNLKPRELOQLKNRPXQLNDFLM5DGLMVNDRSUHPDQDPHQMHQDSUHGYVHP
]DDQDORJQLSUHQRVJRYRUDNLXSRUDEOMDYJUDMHQRDQWHQRGHO+DUPRQL]LUDQL
(1NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land Mobile Service
- Radio equipment using integral antennas intended primarily for analogue speech - Part
2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE
Directive
Ta slovenski standard je istoveten z: EN 300 296-2 Version 1.2.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.070.01 Mobilni servisi na splošno Mobile services in general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land Mobile Service;
Radio equipment using integral antennas
intended primarily for analogue speech;
Part 2: Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive

2 ETSI EN 300 296-2 V1.2.1 (2009-02)

Reference
REN/ERM-TGDMR-272-2
Keywords
analogue, mobile, PMR, radio, regulation, speech
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 300 296-2 V1.2.1 (2009-02)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .5
1 Scope.6
2 References.6
2.1 Normative references.6
2.2 Informative references.6
3 Definitions, symbols and abbreviations .7
3.1 Definitions.7
3.2 Symbols.7
3.3 Abbreviations.7
4 Technical specifications .7
4.1 Environmental profile.7
4.2 Transmitter requirements.7
4.2.1 Frequency error.7
4.2.1.1 Definition.7
4.2.1.2 Limit.7
4.2.1.3 Methods of measurement.7
4.2.2 Effective radiated power.8
4.2.2.1 Definition.8
4.2.2.2 Limit.8
4.2.2.3 Methods of measurement.8
4.2.3 Maximum permissible frequency deviation.8
4.2.3.1 Definition.8
4.2.3.2 Limit.8
4.2.3.3 Methods of measurement.8
4.2.4 Adjacent and alternate channel power .8
4.2.4.1 Definition.8
4.2.4.2 Limit.8
4.2.4.3 Methods of measurement.8
4.2.5 Radiated unwanted emissions in the spurious domain.8
4.2.5.1 Definition.8
4.2.5.2 Limit.8
4.2.5.3 Methods of measurement.8
4.3 Receiver requirements.9
4.3.1 Average usable sensitivity (field strength, speech).9
4.3.1.1 Definition.9
4.3.1.2 Limit.9
4.3.1.3 Method of measurement.9
4.3.2 Co-channel rejection.9
4.3.2.1 Definition.9
4.3.2.2 Limit.9
4.3.2.3 Method of measurement.9
4.3.3 Adjacent channel selectivity .9
4.3.3.1 Definition.9
4.3.3.2 Limit.9
4.3.3.3 Method of measurement.9
4.3.4 Spurious response rejection .9
4.3.4.1 Definition.9
4.3.4.2 Limit.9
4.3.4.3 Method of measurement.10
4.3.5 Intermodulation response rejection.10
4.3.5.1 Definition.10
ETSI
4 ETSI EN 300 296-2 V1.2.1 (2009-02)
4.3.5.2 Limit.10
4.3.5.3 Method of measurement.10
4.3.6 Blocking or desensitization.10
4.3.6.1 Definition.10
4.3.6.2 Limit.10
4.3.6.3 Method of measurement.10
4.3.7 Spurious radiations.10
4.3.7.1 Definition.10
4.3.7.2 Limit.10
4.3.7.3 Method of measurement.10
5 Testing for compliance with technical requirements.11
5.1 Environmental conditions for testing .11
5.1.1 Normal and extreme test-conditions .11
5.1.2 Test power source .11
5.1.3 Choice of samples for test suites.11
5.2 Interpretation of the measurement results .11
5.3 Essential radio test suites.11
5.3.1 Frequency error.11
5.3.2 Effective radiated power.11
5.3.3 Maximum frequency deviation.12
5.3.4 Adjacent and alternate channel power .12
5.3.5 Radiated unwanted emission in the spurious domain .12
5.3.6 Spurious radiations.12
5.4 Other test specifications.12
5.4.1 Average usable sensitivity (speech, field strength).12
5.4.2 Co-channel rejection.12
5.4.3 Adjacent channel selectivity .12
5.4.4 Spurious response rejection .12
5.4.5 Intermodulation response rejection.12
5.4.6 Blocking or desensitization.12
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).13
Annex C (informative): Bibliography.16
History .17

ETSI
5 ETSI EN 300 296-2 V1.2.1 (2009-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations [i.2].
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC of the European Parliament and of
the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive") [i.1].
Technical specifications relevant to Directive 1999/5/EC [i.1] are given in annex A.
The present document is part 2 of a multi-part deliverable covering the Land Mobile Service; Radio equipment using
integral antennas intended primarily for analogue speech, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive".

National transposition dates
Date of adoption of this EN: 9 February 2009
Date of latest announcement of this EN (doa): 31 May 2009
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 November 2009
Date of withdrawal of any conflicting National Standard (dow): 30 November 2010

Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all
...