SIST-TP CLC/R217-017:2004
(Main)Evaluation techniques of the reliability test structures of the European mini test chip
Evaluation techniques of the reliability test structures of the European mini test chip
Based on JESSI document * D116/196: TC 217 disbanded * D122/065: Withdrawn
Evalvacijske tehnike za preskušanje struktur zanesljivosti evropskega mini preskusnega čipa
General Information
Standards Content (Sample)
SLOVENSKI SIST-TP CLC/R217-017:2004
STANDARD
september 2004
Evalvacijske tehnike za preskušanje struktur zanesljivosti evropskega mini
preskusnega čipa
Evaluation techniques of the reliability test structures of the European mini test chip
ICS 35.240.
...
This May Also Interest You
This standard describes test methods used to evaluate the repeatability, reproducibility and accuracy of dental devices for 3D metrology. The standard is applicable to dental chairside CAD/CAM systems. The scope of this document is not intended to include unique systems with other specific applications of 3D metrology in the dental field such as 3D computed tomography, magnetic resonance imaging and stereophotogrammetry.
- Standard23 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft23 pagesEnglish languagesale 10% offe-Library read for×1 day
This European Standard defines common fundamental concepts for Long Term Archiving and Retrieval
of CAD mechanical information for elementary parts and assemblies. It details the “fundamentals and
concepts” of EN 9300-003 in the specific context of Long Term Archiving of CAD mechanical models.
CAD mechanical information is divided into assembly structure and geometrical information, both
including explicit and implicit geometrical representation, Geometric Dimensioning and Tolerancing
with Form Features.
The EN 9300-1XX family is organized as a sequence of parts, each building on the previous in a
consistent way, each adding a level of complexity in the CAD data model. This includes the detailing of
relationships between the essential information for the different types of CAD information covered by the
EN 9300-1XX family.
As technology matures additional parts will be released in order to support new requirements within
the aerospace community.
The present part describes:
— the fundamentals and concepts for Long Term Archiving and Retrieval of CAD 3D mechanical
information;
— the document structure of the EN 9300-1XX family, and the links between all these parts;
— the qualification methods for long term preservation of archived CAD mechanical information;
more specially, principles for the CAD validation properties and for verification of the quality of the
CAD archived file;
— specifications for the preservation planning of archived CAD information;
— specific functions for administration and monitoring of CAD archived mechanical models;
— the definition of Archive Information Packages for CAD data.
- Standard58 pagesEnglish languagesale 10% offe-Library read for×1 day
EN 9300-010 provides an overview description for the recommended processes for archiving of 3D product data, e.g. 3D CAD and PDM data. The processes are described in EN 9300-011 to EN 9300-016.
- Standard19 pagesEnglish languagesale 10% offe-Library read for×1 day
This document defines the requirements on a digital archive to preserve for the long term the 3D
explicit geometry of single CAD parts. The goal is to preserve the 3D information without loss with
respect to the geometry produced by the original CAD system, following the principles laid down in
EN 9300-003 “Fundamentals and Concepts”, including the use of an open data format.
1.2 In scope
The following is in scope of this part of EN 9300:
— business specification for long term archiving and retrieval of CAD 3D explicit geometry
(see Clause 5);
— essential information of CAD 3D explicit geometry (solids, curves, surfaces, and points) to be
preserved (see Clause 6);
— data structures detailing the main fundamentals and concepts of CAD 3D explicit geometry
(see Clause 7);
— verification rules to check CAD 3D explicit geometry for consistency and data quality (see Clause 8);
— validation rules to be stored with the CAD 3D explicit geometry in the archive to check essential
characteristics after retrieval (see Clause 9).
NOTE This includes the geometrical external shape resulting from CAD disciplines 3D entities (e.g., 3D
Structural components, 3D Tubing, 3D electrical harness, 3D composite, etc.).
- Standard42 pagesEnglish languagesale 10% offe-Library read for×1 day
This document is a part of the EN 9300 Series. This document addresses requirements for the long term
archiving of digital product information, applicable to the international aerospace industry.
Data shall be available to meet regulatory, legal, contractual and business requirements.
Initially, this document sums up the main business requirements for long term archiving of digital
product data. Although these requirements are not in themselves normative, when making data
available over an extended period, it is a fundamental principle that the contextual data needed to
interpret the data is also available.
This document uses the OAIS reference model to provide comparability with other approaches to
keeping information available. However, OAIS is a standard reference model for comparison, not a
standard for implementation. Consequently, this document defines requirements for processes (and
associated technologies) intended to make data available for the life of a product, and does so in terms
of the OAIS model.
In dealing with traditional media, the differences between substantial change and unimportant
“surface” change are generally self-evident. For example, the yellowing of paper over time, or the
encrustation of a gravestone with lichen do not lose the information contained, whereas the loss of
pages of a document, or the erosion of the stone do so, and archiving focusses on the preservation of the
medium. For digital product data, the medium is unimportant, but the content can be corrupted. The
subject of the (many) remaining parts of this standard is the identification of the information that shall
be uncorrupted if digital product data is to be usable in the future, and the consequent refinement of
processes and procedures to insure this.
This document addresses, archiving of digital product data required for product definition, such as in
three-dimensional representations a tolerances, material properties, manufacturing data, etc.
specification call-outs, product structure and configuration control data, etc. Other parts of the EN 9300
standards will cover more specifically the long term archiving of, for example, composites, electrical
systems, product analyses and product simulation information.
This document also addresses managing the evolution of technologies required to ensure the
availability and usability of the data for the required archiving period.
This document is not intended to incorporate company specific requirements and does not dictate
specific organizational structures within a company. This document does not specify a design or an
implementation of an archive system. Actual implementations may distribute responsibilities or break
out functionality differently.
This document assumes that all requirements for configuration management of the product data are in
place and therefore are not specifically described in this document.
If an organization chooses to implement requirements beyond those outlined in this requirements
document, those additional requirements shall not conflict or negatively impact the requirements
contained in this document.
Purpose:
This document establishes legal and other business requirements for processes intended to preserve
digital data. Data needs to be stored and maintained so that data is retrievable and usable for the
required archiving period. In addition, for some business requirements, data needs to be authentically
preserved and accessed.
This standard is intended to allow for different implementations based on a company’s specific business
environment.
- Standard31 pagesEnglish languagesale 10% offe-Library read for×1 day
EN 9300-010 provides an overview description for the recommended processes for archiving of 3D product data, e.g. 3D CAD and PDM data. The processes are described in EN 9300-011 to EN 9300-016.
- Standard10 pagesEnglish languagesale 10% offe-Library read for×1 day
This document establishes the general principles of layer structuring within CAD files. Layers are used
to control visibility and to manage and communicate CAD file data. Layer names are used to represent
this structure.
The principles are applicable to all parties involved in preparing and using technical documentation on computer systems. Although these principles are primarily for users, CAD system developers are expected to provide software tools capable of implementing and supporting this document. An important use is also to structure data in component libraries produced by third parties.
- Standard12 pagesEnglish languagesale 10% offe-Library read for×1 day
This document covers the organization and allocation of layers for CAD on construction projects for the
purposes of communication and management.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
This International Standard specifies basic rules for the management of technical documents.
- Standard17 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard68 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.