SIST EN 13126-8:2006
(Main)Building hardware - Requirements and test methods for windows and doors height windows - Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware
Building hardware - Requirements and test methods for windows and doors height windows - Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware
This European Standard specifies the requirements and test procedures for durability, strength, security and function of Tilt&Turn, Tilt-First and Turn-Only hardware components or sets for windows and balcony doors in accordance with common application as shown in Annex A of EN 13126-1. For other applications refer to EN 12519.
By means of this European Standard, the user of recognized tested hardware can presume, that with correct usage, the Tilt&Turn, Tilt-First or Turn-Only hardware components or sets for windows and balcony-doors conforms to prescribed requirements.
NOTE To maintain the guaranteed characteristics during the utilization period, it is necessary to comply with the manufacturer’s product information as well as the manufacturer’s maintenance and service instructions in a manner that can be proven.
Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 8: Drehkipp, Kippdreh und DrehBeschläge
Diese Europäische Norm legt die Anforderungen an und Prüfverfahren für die Dauerfunktionstüchtigkeit,
Festigkeit, Schutzwirkung und Funktionsweise von Drehkipp-, Kippdreh- und Dreh-Beschlagteilen
oder -Beschlaggarnituren für Fenster und Fenstertüren entsprechend den in prEN 13126-1:2005, Anhang A,
dargestellten üblichen Anwendungen fest. Für weitere Anwendungen wird auf EN 12519 verwiesen.
Mit Hilfe dieser Norm kann der Anwender anerkannter, geprüfter Beschläge davon ausgehen, dass bei
sachgemäßem Gebrauch die Drehkipp-, Kippdreh- und Dreh-Beschlagteile oder -Beschlaggarnituren für
Fenster und Fenstertüren die vorgeschriebenen Anforderungen erfüllen.
ANMERKUNG Um die zugesicherten Eigenschaften über den Nutzungszeitraum aufrechterhalten zu können, ist es
unerlässlich, die Produktinformationen zu beachten sowie die Wartungs- und Pflegehinweise des Herstellers
nachvollziehbar einzuhalten.
Quincaillerie pour le bâtiment - Exigences et méthodes d'essai des ferrures de fenetres et portes-fenetres - Partie 8 : Ferrures d'oscillo-battant, de battant-oscillant et d'ouvrant pivotant
La présente Norme européenne spécifie les exigences et procédures d'essai relatives a l'endurance, a la résistance, a la sécurité des biens et au fonctionnement des composants ou ensembles de ferrures d'oscillo-battant, de battant-oscillant et d'ouvrant pivotant pour fenetres et portes-fenetres, conformément aux applications courantes, comme indiqué dans l'Annexe A du prEN 13126-1. Pour les autres applications, il y a lieu de se référer a l'EN 12519.
Grâce a cette Norme européenne et sous réserve d'un usage approprié, l'utilisateur de la ferrure dument soumise aux essais peut considérer que le composant ou l'ensemble de ferrures d'oscillo-battant, de battant-oscillant ou d'ouvrant pivotant pour fenetres ou portes-fenetres a satisfait aux conditions prescrites.
NOTE Pour que les caractéristiques garanties subsistent pendant toute la période d'utilisation, il est indispensable de se conformer de façon démontrable aux informations produit du fabricant ainsi qu'a ses instructions de maintenance et de service.
Stavbno okovje – Zahteve in preskusne metode za okna in zastekljena vrata – 8. del: Nagibno-vrtljivo, vrtljivo-nagibno ter vrtljivo okovje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13126-8:2006
01-maj-2006
1DGRPHãþD
SIST-TS CEN/TS 13126-8:2005
Stavbno okovje – Zahteve in preskusne metode za okna in zastekljena vrata – 8.
del: Nagibno-vrtljivo, vrtljivo-nagibno ter vrtljivo okovje
Building hardware - Requirements and test methods for windows and doors height
windows - Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware
Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und
Prüfverfahren - Teil 8: Drehkipp, Kippdreh und DrehBeschläge
Quincaillerie pour le bâtiment - Exigences et méthodes d'essai des ferrures de fenetres
et portes-fenetres - Partie 8 : Ferrures d'oscillo-battant, de battant-oscillant et d'ouvrant
pivotant
Ta slovenski standard je istoveten z: EN 13126-8:2006
ICS:
91.190 Stavbna oprema Building accessories
SIST EN 13126-8:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13126-8:2006
---------------------- Page: 2 ----------------------
SIST EN 13126-8:2006
EUROPEAN STANDARD
EN 13126-8
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2006
ICS 91.190 Supersedes CEN/TS 13126-8:2004
English Version
Building hardware - Requirements and test methods for windows
and doors height windows - Part 8: Tilt&Turn, Tilt-First and Turn-
Only hardware
Quincaillerie pour le bâtiment - Exigences et méthodes Baubeschläge - Beschläge für Fenster und Fenstertüren -
d'essai des ferrures de fenêtres et portes-fenêtres - Partie 8 Anforderungen und Prüfverfahren - Teil 8: Drehkipp-,
: Ferrures d'oscillo-battant, de battant-oscillant et d'ouvrant Kippdreh- und Dreh-Beschläge
pivotant
This European Standard was approved by CEN on 28 December 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13126-8:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13126-8:2006
EN 13126-8:2006 (E)
Contents Page
Foreword .4
1 Scope .5
2 Normative references .5
3 Terms and definitions.5
4 Classification.6
4.1 General .6
4.2 Category of use (1 – first digit) .6
4.3 Durability (2 – second digit) .6
4.4 Mass (3 – third digit) .6
4.5 Fire resistance (4 – fourth digit).6
4.6 Safety in use (5 – fifth digit) .6
4.7 Corrosion resistance (6 – sixth digit) .6
4.8 Security (7 – seventh digit).6
4.9 Applicable part (8 – eighth digit).7
4.10 Test sizes (9 – ninth digit) .7
4.11 Example of classification for Tilt&Turn hardware .7
5 Requirements .8
5.1 General .8
5.2 Mechanical stability .8
5.2.1 Stability of the scissor stay.8
5.2.2 Mechanical strength of hinges.9
5.3 Durability .11
5.4 Admissible tolerances .11
5.4.1 Sash operation tolerance .11
5.4.2 Handle operation tolerance.11
5.4.3 Locking point variable tolerance .12
5.5 Resistance to additional loading .12
5.6 Minimum closing device resistance .12
5.7 Corrosion resistance .12
5.8 Resistance to other additional tests.13
6 Test equipment .13
7 Test procedures .13
7.1 Samples .13
7.2 Stability of hinge .13
7.3 Durability test – Tilt&Turn .13
7.3.1 General .13
7.3.2 Tilt&Turn cycles – Tilt-First cycles .14
7.3.3 Turn cycles (into 90° turn position) .15
7.3.4 Acceptance criteria.16
7.3.5 Additional loading test - 1 000 N.16
7.3.6 Reveal test for hardware without turn-restrictor .16
7.3.7 Test for hardware with turn-restrictor .18
7.3.8 Rebate-hindrance test .18
7.4 Durability test – Turn-Only hardware .19
7.5 Minimum closing device resistance test.19
7.6 Corrosion resistance .19
2
---------------------- Page: 4 ----------------------
SIST EN 13126-8:2006
EN 13126-8:2006 (E)
Annex A (informative) Typical test equipment .20
Annex B (normative) Flow chart of test procedures .21
Bibliography.22
3
---------------------- Page: 5 ----------------------
SIST EN 13126-8:2006
EN 13126-8:2006 (E)
Foreword
This European Standard (EN 13126-8:2006) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2006, and conflicting national standards shall be withdrawn at
the latest by August 2006.
This European Standard supersedes CEN/TS 13126-8:2004.
A full contribution to the preparation of this European Standard has been made by the European
manufacturers´ organization ‘ARGE’ and national standards bodies.
This European Standard is one of a series of European Standards for building hardware products. It is divided
into seventeen parts incorporating all types of windows and balcony doors.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
4
---------------------- Page: 6 ----------------------
SIST EN 13126-8:2006
EN 13126-8:2006 (E)
1 Scope
This European Standard specifies the requirements and test procedures for durability, strength, security and
function of Tilt&Turn, Tilt-First and Turn-Only hardware components or sets for windows and balcony doors in
accordance with common application as shown in Annex A of EN 13126-1.
By means of this European Standard, the user of recognized tested hardware can presume, that with correct
usage, the Tilt&Turn, Tilt-First or Turn-Only hardware components or sets for windows and balcony-doors
conforms to prescribed requirements.
NOTE To maintain the guaranteed characteristics during the utilization period, it is necessary to comply with the
manufacturer’s product information as well as the manufacturer’s maintenance and service instructions in a manner that
can be proven.
2 Normative references
The following referenced documents are indispensable for the application of this European Standard. For
dated references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 1670, Building hardware — Corrosion resistance — Requirements and test methods
EN 12519:2004, Windows and pedestrian doors — Terminology
EN 13126-1:2006, Building hardware — Requirements and test methods for windows and doors height
windows — Part 1: Requirements common to all types of hardware
3 Terms and definitions
For the purposes of this European Standard, the terms and definitions given in EN 12519:2004 and the
following apply.
NOTE The following terms and definitions apply to windows and balcony-doors made of wood, PVC-U, aluminium or
steel and their appropriate material combinations.
3.1
Tilt&Turn
Tilt&Turn hardware opens and locks windows and balcony-doors. Tilt&Turn hardware is used to enable
windows and balcony-doors initially into the turning position (side-hung), and then into the tilting position by
operating the handle. Tilt&Turn hardware in the sense of this European Standard is a one-hand-operation
hardware for windows and balcony-doors for structural engineering, conforming to the test sizes stated in
Table 1
3.2
Tilt-First
Tilt-First hardware is used to enable windows and balcony-doors initially into the tilting position, and then into
the turning position (side-hung) by operating the handle. The definition of terms and demands made on
Tilt&Turn hardware are also applicable to Tilt-First hardware
5
---------------------- Page: 7 ----------------------
SIST EN 13126-8:2006
EN 13126-8:2006 (E)
3.3
Turn-Only
Turn-Only hardware is used to enable windows and balcony-doors into a turning position (side-hung) by
operating the handle. The definition of terms and demands made on Tilt&Turn hardware are also applicable to
Turn-Only hardware
4 Classification
4.1 General
The classification for Tilt&Turn, Tilt-First or Turn-Only hardware shall be in accordance with the requirements
of Clause 4 of EN 13126-1:2006.
4.2 Category of use (1 – first digit)
No marking is required for the category of use in accordance with 4.2 of EN 13126-1:2006.
4.3 Durability (2 – second digit)
Two grades shall be identified in accordance with 5.3 of this European Standard and 4.3 of
EN 13126-1:2006:
grade 4: 15 000;
grade 5: 25 000.
4.4 Mass (3 – third digit)
The following grades shall be established in accordance with 4.4 of EN 13126-1:2006:
050, 060, 070, 080, 090, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190 and 200
4.5 Fire resistance (4 – fourth digit)
One grade shall be identified in accordance with 4.5 of EN 13126-1:2006:
grade 0 : no requirements.
4.6 Safety in use (5 – fifth digit)
One grade shall be identified in accordance with 4.6 of EN 13126-1:2006:
grade 1: The hardware shall conform to the requirements of parts 1 and 8 from this standard.
4.7 Corrosion resistance (6 – sixth digit)
Hardware shall conform in accordance with 5.7 of this European Standard and 4.7 of
EN 13126-1:2006 to the grades listed in EN 1670, whereby grade 3 is the minimum requirement.
4.8 Security (7 – seventh digit)
No marking is required for the category of security in accordance with 4.8 of EN 13126-1:2006.
6
---------------------- Page: 8 ----------------------
SIST EN 13126-8:2006
EN 13126-8:2006 (E)
4.9 Applicable part (8 – eighth digit)
The eighth digit shows “8” indicating the part of the standard which was used for testing the Tilt&Turn, Tilt-First
and Turn-Only hardware components or sets in accordance with 4.9 of EN 13126-1:2006.
4.10 Test sizes (9 – ninth digit)
The ninth digit indicates the test sizes which were used for testing the Tilt&Turn, Tilt-First and Turn-Only
hardware components or sets in accordance with Table 1, 5.1 of this European Standard and 4.10 of EN
13126-1:2006.
All sizes are stated in mm, S.R.W. = Sash Rebate Width, S.R.H. = Sash Rebate Height.
1 300 mm wide x 1 200 mm high (window mass ≤ 130 kg);
1 550 mm wide x 1 400 mm high (window mass > 130 kg);
900 mm wide x 2 300 mm high (balcony door size).
The stated sizes are test sizes only. They do not relate to the maximum sizes to which a window may be
fabricated.
The manufacturer shall ensure, in accordance with the appropriate documentation, that for larger than
recommended test-specimens the forces on the hardware do not exceed the test specimen forces.
4.11 Example of classification for Tilt&Turn hardware
1 2 3 4 5 6 7 8 9
- 4 080 0 1 3 - 8 900/2300
This denotes Tilt&Turn hardware, which has:
Digit 1 category of use - (no requirements)
Digit 2 durability grade 4 (15 000 cycles)
Digit 3 mass 80 kg
Digit 4 fire resistance grade 0 (no requirements)
Digit 5 safety in use grade 1
Digit 6 corrosion resistance grade 3
Digit 7 security - (no requirements)
Digit 8 applicable part tested according to this European Standard
1) 2)
Digit 9 test sizes S.R.W. = 900 mm, S.R.H. = 2 300 mm
1)
S.R.W. = sash rebate width
2)
S.R.H. = sash rebate height
7
---------------------- Page: 9 ----------------------
SIST EN 13126-8:2006
EN 13126-8:2006 (E)
5 Requirements
5.1 General
The requirements for Tilt&Turn, Tilt-First or Turn-Only hardware shall be in accordance with Clause 5 of EN
13126-1:2006. Table 1 shows the test sizes.
Table 1 — Test sizes and minimum number of locking points
Test sizes Minimum number of locking Diagram showing locking point positions
a
S.R.W. X S.R.H. in mm points.
1 300 x 1 200
7
1 550 x 1 400
900 x 2 300 6
a
S.R.W. = Sash Rebate Width, S.R.H. = Sash Rebate Height.
In the case of a manufacturer choosing the option of fewer locking-points, the hardware shall be tested noting
the number of locking-points in the test report.
5.2 Mechanical stability
5.2.1 Stability of the scissor stay
The scissors stay shall ensure that a sash, when operated incorrectly (mishandled), is securely held.
In this case (of mishandling), the hinges (scissor stay with stay bearing and corner pivot rest with sash hinge)
shall still demonstrate a connection between the sash and the frame and afterwards function in its intended
manner.
If the scissors stay does not fulfil this demand, a mishandling-device shall be installed. In this case the test
takes place in accordance with Clause 7 with an installed mishandling-device.
8
---------------------- Page: 10 ----------------------
SIST EN 13126-8:2006
EN 13126-8:2006 (E)
5.2.2 Mechanical strength of hinges
Hinges that have a scissor stay with a stay bearing and corner pivot rest with sash hinge, shall guide the sash
securely during every operating position.
Such hinges undergo supplementary static load tests, as described in the following Figures 1 and 2, which
correspond to a 5-fold load value of the frame hinges under test procedures specified in Clause 7 (refer to
load value "F" from the following Tables 2 and 3). The test comprises of testing 20 individual hardware
components of each type of hinge.
1
2
Key
1 stay bearing tes
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.