SIST EN 302 885-2 V1.2.2:2014
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
The present document states the minimum technical characteristics and methods of measurement required for portable Very High Frequency (VHF) radiotelephones with integrated handheld class D DSC operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz channels or 25 kHz and 12,5 kHz channels. The present document also specifies technical characteristics, methods of measurement and required test results.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Prenosna radiotelefonska oprema VHF za pomorsko mobilno storitev, ki deluje v pasovih VHF z vgrajenim ročnim digitalnim selektivnim klicem (DSC) razreda D - 2. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
Ta dokument navaja minimalne tehnične karakteristike in merilne metode za prenosne radiotelefone VHF z vgrajenim ročnim digitalnim selektivnim klicem razreda D, ki delujejo v določenih frekvenčnih pasovih, dodeljenih pomorskim mobilnim storitvam, ki uporabljajo kanale 25 kHz ali 25 kHz in 12,5 kHz. Ta dokument določa tudi tehnične karakteristike, merilne metode in zahtevane rezultate preskusov.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC - Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 302 885-2 Version 1.2.2SIST EN 302 885-2 V1.2.2:2014en01-junij-2014SIST EN 302 885-2 V1.2.2:2014SLOVENSKI
STANDARD
SIST EN 302 885-2 V1.2.2:2014
ETSI EN 302 885-2 V1.2.2 (2014-03) Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
Harmonized European Standard SIST EN 302 885-2 V1.2.2:2014
ETSI ETSI EN 302 885-2 V1.2.2 (2014-03) 2
Reference REN/ERM-TG26-104-2a Keywords DSC, maritime, radio, VHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2014. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 885-2 V1.2.2:2014
ETSI ETSI EN 302 885-2 V1.2.2 (2014-03) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 6 1 Scope . 7 2 References . 7 2.1 Normative references . 7 2.2 Informative references . 7 3 Definitions and abbreviations . 8 3.1 Definitions . 8 3.2 Abbreviations . 8 4 Technical requirements specifications . 8 4.1 Environmental profile . 8 4.2 Conformance requirements . 8 4.2.1 Transmitter frequency error . 8 4.2.1.1 Definition . 8 4.2.1.2 Limit . 8 4.2.1.3 Conformance . 8 4.2.2 Transmitter carrier power . 9 4.2.2.1 Definition . 9 4.2.2.2 Limit . 9 4.2.2.3 Conformance . 9 4.2.3 Maximum transmitter frequency deviation . 9 4.2.3.1 Definition . 9 4.2.3.2 Limit . 9 4.2.3.3 Conformance . 9 4.2.4 Reduction of frequency deviation at modulation frequencies above 3 kHz . 9 4.2.4.1 Definition . 9 4.2.4.2 Limit . 9 4.2.4.3 Conformance . 9 4.2.5 Transmitter adjacent channel power . 9 4.2.5.1 Definition . 9 4.2.5.2 Limit . 9 4.2.5.3 Conformance . 10 4.2.6 Transmitter conducted spurious emissions conveyed to the antenna . 10 4.2.6.1 Definition . 10 4.2.6.2 Limit . 10 4.2.6.3 Conformance . 10 4.2.7 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the antenna . 10 4.2.7.1 Definition . 10 4.2.7.2 Limit . 10 4.2.7.3 Conformance . 10 4.2.8 Transient frequency behaviour of the transmitter . 10 4.2.8.1 Definition . 10 4.2.8.2 Limit . 10 4.2.8.3 Conformance . 10 4.2.9 DSC frequency error (demodulated DSC signal). 10 4.2.9.1 Definition . 10 4.2.9.2 Limit . 11 4.2.9.3 Conformance . 11 4.2.10 DSC modulation index. 11 4.2.10.1 Definition . 11 4.2.10.2 Limit . 11 SIST EN 302 885-2 V1.2.2:2014
ETSI ETSI EN 302 885-2 V1.2.2 (2014-03) 4 4.2.10.3 Conformance . 11 4.2.11 DSC modulation rate . 11 4.2.11.1 Definition . 11 4.2.11.2 Limit . 11 4.2.11.3 Conformance . 11 4.2.12 Testing of free channel transmission on DSC channel 70 . 11 4.2.12.1 Definition . 11 4.2.12.2 Limit . 11 4.2.12.3 Conformance . 11 4.2.13 Receiver maximum usable sensitivity . 11 4.2.13.1 Definition . 11 4.2.13.2 Limit . 12 4.2.13.3 Conformance . 12 4.2.14 Receiver co-channel rejection . 12 4.2.14.1 Definition . 12 4.2.14.2 Limit . 12 4.2.14.3 Conformance . 12 4.2.15 Receiver adjacent channel selectivity . 12 4.2.15.1 Definition . 12 4.2.15.2 Limit . 12 4.2.15.3 Conformance . 12 4.2.16 Receiver spurious response rejection . 12 4.2.16.1 Definition . 12 4.2.16.2 Limit . 12 4.2.16.3 Conformance . 12 4.2.17 Receiver intermodulation response . 12 4.2.17.1 Definition . 12 4.2.17.2 Limit . 13 4.2.17.3 Conformance . 13 4.2.18 Receiver blocking or desensitization . 13 4.2.18.1 Definition . 13 4.2.18.2 Limit . 13 4.2.18.3 Conformance . 13 4.2.19 Receiver conducted spurious emissions . 13 4.2.19.1 Definition . 13 4.2.19.2 Limit . 13 4.2.19.3 Conformance . 13 4.2.20 Receiver radiated spurious emissions . 13 4.2.20.1 Definition . 13 4.2.20.2 Limit . 13 4.2.20.3 Conformance . 13 5 Testing for compliance with technical requirements . 14 5.1 Test conditions, power supply and ambient temperatures . 14 5.2 Interpretation of the measurement results . 14 5.3 Essential radio test suites . 14 5.3.1 Transmitter frequency error . 14 5.3.2 Transmitter carrier power . 15 5.3.3 Maximum transmitter frequency deviation . 15 5.3.4 Reduction of frequency deviation at modulation frequencies above 3 kHz . 15 5.3.5 Transmitter adjacent channel power . 15 5.3.6 Transmitter conducted spurious emissions conveyed to the antenna . 15 5.3.7 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the antenna . 15 5.3.8 Transient frequency behaviour of the transmitter . 15 5.3.9 DSC frequency error (demodulated DSC signal). 15 5.3.10 DSC modulation index. 15 5.3.11 DSC modulation rate . 15 5.3.12 Testing of free channel transmission on DSC channel 70 . 15 5.4 Other test specifications . 16 5.4.1 General . 16 5.4.2 Receiver maximum usable sensitivity . 16 SIST EN 302 885-2 V1.2.2:2014
ETSI ETSI EN 302 885-2 V1.2.2 (2014-03) 5 5.4.3 Receiver co-channel rejection . 16 5.4.4 Receiver adjacent channel selectivity . 16 5.4.5 Receiver spurious response rejection . 16 5.4.6 Receiver intermodulation response . 16 5.4.7 Receiver blocking or desensitization . 16 5.4.8 Receiver conducted spurious emissions . 16 5.4.9 Receiver radiated spurious emissions . 16 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 17 Annex B: Void . 20 History . 21
SIST EN 302 885-2 V1.2.2:2014
ETSI ETSI EN 302 885-2 V1.2.2 (2014-03) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to the European Commission mandate M/284 issued under Directive 98/34/EC [i.2] as amended by Directive 98/48/EC [i.5]. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1]. See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonized Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The requirements relevant to Directive 1999/5/EC [i.1] are summarized in annex A. The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC, as identified below: Part 1: "Technical characteristics and methods of measurement"; Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive"; Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive".
National transposition dates Date of latest announcement of this EN (doa): 31 June 2014 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 December 2014 Date of withdrawal of any conflicting National Standard (dow): 31 December 2015
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The modular structure is shown in EG 201 399 [i.4]. SIST EN 302 885-2 V1.2.2:2014
ETSI ETSI EN 302 885-2 V1.2.2 (2014-03) 7 1 Scope The present document states the minimum technical characteristics and methods of measurement required for portable Very High Frequency (VHF) radiotelephones with integrated handheld class D DSC operating in certain frequency bands allocated to the maritime mobile service using either 25 kHz channels or 25 kHz and 12,5 kHz channels. The present document also specifies technical characteristics, methods of measurement and required test results. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. [1] ETSI EN 302 885-1 (V1.3.1) (03-2014): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 1: Technical characteristics and methods of measurement". [2] ETSI TR 100 028-1 (V1.4.1) (12-2001): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 1". 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [i.2] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [i.3] EC decision 2013/638/EU of 12 August 2013 on essential requirements relating to marine radio communication equipment which is intended to be used on non-SOLAS vessels and to participate in the Global Maritime Distress and Safety System (GMDSS). [i.4] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of Harmonized Standards for application under the R&TTE Directive". [i.5] Directive 98/48/EC of the European Parliament and of the Council of 20 July 1998 amending Directive 98/34/EC laying down a procedure for the provision of information in the field of technical standards and regulations. SIST EN 302 885-2 V1.2.2:2014
ETSI ETSI EN 302 885-2 V1.2.2 (2014-03) 8 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in the R&TTE Directive [i.1] and the following apply: environmental profile: range of environmental conditions under which equipment within the scope of the present document is required to comply with the provisions of the present document supplier: entity referred to in the R&TTE Directive [i.1] responsible for the placing on the market of an equipment within the scope of the Directive 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: GMDSS Global Maritime Distress and Safety System R&TTE Radio and Telecommunic
...
ETSI EN 302 885-2 V1.2.2 (2014-03)
Harmonized European Standard
Electromagnetic compatibility and
Radio spectrum Matters (ERM);
Portable Very High Frequency (VHF) radiotelephone
equipment for the maritime mobile service operating
in the VHF bands with integrated handheld class D DSC;
Part 2: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 ETSI EN 302 885-2 V1.2.2 (2014-03)
Reference
REN/ERM-TG26-104-2a
Keywords
DSC, maritime, radio, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2014.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 302 885-2 V1.2.2 (2014-03)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Transmitter frequency error . 8
4.2.1.1 Definition . 8
4.2.1.2 Limit . 8
4.2.1.3 Conformance . 8
4.2.2 Transmitter carrier power . 9
4.2.2.1 Definition . 9
4.2.2.2 Limit . 9
4.2.2.3 Conformance . 9
4.2.3 Maximum transmitter frequency deviation . 9
4.2.3.1 Definition . 9
4.2.3.2 Limit . 9
4.2.3.3 Conformance . 9
4.2.4 Reduction of frequency deviation at modulation frequencies above 3 kHz . 9
4.2.4.1 Definition . 9
4.2.4.2 Limit . 9
4.2.4.3 Conformance . 9
4.2.5 Transmitter adjacent channel power . 9
4.2.5.1 Definition . 9
4.2.5.2 Limit . 9
4.2.5.3 Conformance . 10
4.2.6 Transmitter conducted spurious emissions conveyed to the antenna . 10
4.2.6.1 Definition . 10
4.2.6.2 Limit . 10
4.2.6.3 Conformance . 10
4.2.7 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 10
4.2.7.1 Definition . 10
4.2.7.2 Limit . 10
4.2.7.3 Conformance . 10
4.2.8 Transient frequency behaviour of the transmitter . 10
4.2.8.1 Definition . 10
4.2.8.2 Limit . 10
4.2.8.3 Conformance . 10
4.2.9 DSC frequency error (demodulated DSC signal). 10
4.2.9.1 Definition . 10
4.2.9.2 Limit . 11
4.2.9.3 Conformance . 11
4.2.10 DSC modulation index. 11
4.2.10.1 Definition . 11
4.2.10.2 Limit . 11
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 302 885-2 V1.2.2 (2014-03)
4.2.10.3 Conformance . 11
4.2.11 DSC modulation rate . 11
4.2.11.1 Definition . 11
4.2.11.2 Limit . 11
4.2.11.3 Conformance . 11
4.2.12 Testing of free channel transmission on DSC channel 70 . 11
4.2.12.1 Definition . 11
4.2.12.2 Limit . 11
4.2.12.3 Conformance . 11
4.2.13 Receiver maximum usable sensitivity . 11
4.2.13.1 Definition . 11
4.2.13.2 Limit . 12
4.2.13.3 Conformance . 12
4.2.14 Receiver co-channel rejection . 12
4.2.14.1 Definition . 12
4.2.14.2 Limit . 12
4.2.14.3 Conformance . 12
4.2.15 Receiver adjacent channel selectivity . 12
4.2.15.1 Definition . 12
4.2.15.2 Limit . 12
4.2.15.3 Conformance . 12
4.2.16 Receiver spurious response rejection . 12
4.2.16.1 Definition . 12
4.2.16.2 Limit . 12
4.2.16.3 Conformance . 12
4.2.17 Receiver intermodulation response . 12
4.2.17.1 Definition . 12
4.2.17.2 Limit . 13
4.2.17.3 Conformance . 13
4.2.18 Receiver blocking or desensitization . 13
4.2.18.1 Definition . 13
4.2.18.2 Limit . 13
4.2.18.3 Conformance . 13
4.2.19 Receiver conducted spurious emissions . 13
4.2.19.1 Definition . 13
4.2.19.2 Limit . 13
4.2.19.3 Conformance . 13
4.2.20 Receiver radiated spurious emissions . 13
4.2.20.1 Definition . 13
4.2.20.2 Limit . 13
4.2.20.3 Conformance . 13
5 Testing for compliance with technical requirements . 14
5.1 Test conditions, power supply and ambient temperatures . 14
5.2 Interpretation of the measurement results . 14
5.3 Essential radio test suites . 14
5.3.1 Transmitter frequency error . 14
5.3.2 Transmitter carrier power . 15
5.3.3 Maximum transmitter frequency deviation . 15
5.3.4 Reduction of frequency deviation at modulation frequencies above 3 kHz . 15
5.3.5 Transmitter adjacent channel power . 15
5.3.6 Transmitter conducted spurious emissions conveyed to the antenna . 15
5.3.7 Transmitter cabinet radiation and conducted spurious emissions other than those conveyed to the
antenna . 15
5.3.8 Transient frequency behaviour of the transmitter . 15
5.3.9 DSC frequency error (demodulated DSC signal). 15
5.3.10 DSC modulation index. 15
5.3.11 DSC modulation rate . 15
5.3.12 Testing of free channel transmission on DSC channel 70 . 15
5.4 Other test specifications . 16
5.4.1 General . 16
5.4.2 Receiver maximum usable sensitivity . 16
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 302 885-2 V1.2.2 (2014-03)
5.4.3 Receiver co-channel rejection . 16
5.4.4 Receiver adjacent channel selectivity . 16
5.4.5 Receiver spurious response rejection . 16
5.4.6 Receiver intermodulation response . 16
5.4.7 Receiver blocking or desensitization . 16
5.4.8 Receiver conducted spurious emissions . 16
5.4.9 Receiver radiated spurious emissions . 16
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 17
Annex B: Void . 20
History . 21
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 302 885-2 V1.2.2 (2014-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to the European Commission mandate M/284 issued
under Directive 98/34/EC [i.2] as amended by Directive 98/48/EC [i.5].
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1].
See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonized Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.1] are summarized in annex A.
The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio
spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile
service operating in the VHF bands with integrated handheld class D DSC, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive".
National transposition dates
Date of latest announcement of this EN (doa): 31 June 2014
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 December 2014
Date of withdrawal of any conflicting National Standard (dow): 31 December 2015
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The
modular structure is shown in EG 201 399 [i.4].
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 302 885-2 V1.2.2 (2014-03)
1 Scope
The present document states the minimum technical characteristics and methods of measurement required for portable
Very High Frequency (VHF) radiotelephones with integrated handheld class D DSC operating in certain frequency
bands allocated to the maritime mobile service using either 25 kHz channels or 25 kHz and 12,5 kHz channels.
The present document also specifies technical characteristics, methods of measurement and required test results.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 302 885-1 (V1.3.1) (03-2014): "Electromagnetic compatibility and Radio spectrum
Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime
mobile service operating in the VHF bands with integrated handheld class D DSC;
Part 1: Technical characteristics and methods of measurement".
[2] ETSI TR 100 028-1 (V1.4.1) (12-2001): "Electromagnetic compatibility and Radio spectrum
Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics;
Part 1".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[i.2] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[i.3] EC decision 2013/638/EU of 12 August 2013 on essential requirements relating to marine radio
communication equipment which is intended to be used on non-SOLAS vessels and to participate
in the Global Maritime Distress and Safety System (GMDSS).
[i.4] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to
the production of Harmonized Standards for application under the R&TTE Directive".
[i.5] Directive 98/48/EC of the European Parliament and of the Council of 20 July 1998 amending
Directive 98/34/EC laying down a procedure for the provision of information in the field of
technical standards and regulations.
ETSI
---------------------- Page: 7 ----------------------
8 ETSI EN 302 885-2 V1.2.2 (2014-03)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [i.1] and the
following apply:
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
supplier: entity referred to in the R&TTE Directive [i.1] responsible for the placing on the market of an equipment
within the scope of the Directive
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
GMDSS Global Maritime Distress and Safety System
R&TTE Radio and Telecommunications Terminal Equipment
VHF Very High Frequency
4 Technical requirements specifications
4.1 Environmental profile
Tests defined in the present document shall be carried out at representative points within the boundary limits of the
declared operational environmental profile which, as a minimum, shall be that specified in the test conditions contained
in the present d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.