SIST EN 62453-309:2018

Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9 (IEC 62453-309:2016)

IEC 62453-309:2016 provides information for integrating the HART® technology into the FDT standard (IEC 62453-2). It specifies communication and other services. This second edition cancels and replaces the first edition published in 2009, and constitutes a technical revision. The main changes are provided in order to provide improved support for updates of the HART protocol (see 6.7 and the updated datatypes in Clauses 9, 10, and 12) and to support introduction of the technology according to IEC 62453-42.
This publication is to be read in conjunction with IEC 62453-2:2009.

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 309: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 9 nach IEC 61784 (IEC 62453-309:2016)

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 309: Intégration des profils de communication - CPF 9 de l'IEC 61784 (IEC 62453-309:2016)

L'IEC 62453-309:2016 fournit des informations sur l'intégration de la technologie HART® dans la norme des outils des dispositifs de terrain (FDT) (IEC 62453-2). Elle spécifie les services de communication et autres services. Cette deuxième édition annule et remplace la première édition parue en 2009. Cette édition constitue une révision technique. Les principales modifications sont apportées afin de fournir une prise en charge améliorée des mises à jour du protocole HART (voir 6.7 et les types de données mis à jour aux Articles 9, 10 et 12), et venir à l'appui de l'introduction de la technologie conformément à l'IEC 62453-42.
Cette publication doit être lue conjointement avec la IEC 62453-2:2009.

Specifikacija vmesnika orodja procesne naprave - 309. del: Integracija komunikacijskih profilov - IEC 61784 CPF 9 (IEC 62453-309:2016)

Standard IEC 62453-309:2016 podaja informacije za integracijo tehnologije HART® v standard za orodje procesne naprave FDT (IEC 62453-2). Določa komunikacijo in druge storitve. Ta druga izdaja razveljavlja in nadomešča prvo izdajo, objavljeno leta 2009, in predstavlja tehnično popravljeno izdajo. Glavne spremembe so navedene za izboljšanje podpore za posodobitve protokola HART (glej 6.7 in posodobljene vrste podatkov v točkah 9, 10 in 12) ter vpeljavo tehnologije v skladu s standardom IEC 62453-42.

General Information

• Status: Published
• Publication Date: 25-Apr-2018
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 22-Dec-2017
• Due Date: 26-Feb-2018
• Completion Date: 26-Apr-2018
• Ref Project: EN 62453-309:2017 - Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9

Relations

• Replaced By: SIST EN IEC 62453-309:2022 - Field device tool (FDT) interface specification - Part 309: Communication profile integration - IEC 61784 CPF 9 (IEC 62453-309:2022)
• Effective Date: 18-Oct-2022
• Replaces: SIST EN 62453-309:2010 - Field device tool interface specification -- Part 309: Communication profile integration - IEC 61784 CPF 9
• Effective Date: 12-Dec-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62453-309:2018
01-junij-2018
1DGRPHãþD
SIST EN 62453-309:2010
Specifikacija vmesnika orodja procesne naprave - 309. del: Integracija
komunikacijskih profilov - IEC 61784 CPF 9 (IEC 62453-309:2016)
Field device tool (FDT) interface specification - Part 309: Communication profile
integration - IEC 61784 CPF 9 (IEC 62453-309:2016)
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 309: Integration von
Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 9 nach IEC 61784 (IEC
62453-309:2016)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 309:
Intégration des profils de communication - CPF 9 de l'IEC 61784 (IEC 62453-309:2016)
Ta slovenski standard je istoveten z: EN 62453-309:2017
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62453-309:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62453-309:2018

---------------------- Page: 2 ----------------------

SIST EN 62453-309:2018


EUROPEAN STANDARD EN 62453-309

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2017
ICS 25.040.40; 35.100.05; 35.110 Supersedes EN 62453-309:2009
English Version
Field device tool (FDT) interface specification - Part 309:
Communication profile integration - IEC 61784 CPF 9
(IEC 62453-309:2016)
Spécification des interfaces des outils des dispositifs de Field Device Tool (FDT)-Schnittstellenspezifikation - Teil
terrain (FDT) - Partie 309: Intégration des profils de 309: Integration von Kommunikationsprofilen -
communication - CPF 9 de l'IEC 61784 Kommunikationsprofilfamilie (CPF) 9 nach IEC 61784
(IEC 62453-309:2016) (IEC 62453-309:2016)
This European Standard was approved by CENELEC on 2016-07-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62453-309:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62453-309:2018
EN 62453-309:2017 (E)

European foreword
The text of document 65E/336/CDV, future edition 1 of IEC 62453-309:2016, prepared by SC 65E
"Devices and integration in enterprise systems", of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62453-309:2017.

The following dates are fixed:

• latest date by which this document has (dop) 2018-06-08
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-12-08
standards conflicting with this
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62453-309:2016 was approved by CENELEC as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 62453-309:2018
EN 62453-309:2017 (E)

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-5-20 -  Industrial communication networks - EN 61158-5-20 -
Fieldbus specifications - Part 5-20:
Application layer service definition - Type
20 elements
IEC 61158-6-20 -  Industrial communication networks - EN 61158-6-20 -
Fieldbus specifications - Part 6-20:
Application layer protocol specification -
Type 20 elements
IEC 61784-1 -  Industrial communication networks - EN 61784-1 -
Profiles -- Part 1: Fieldbus profiles
IEC 62453-1 -  Field Device Tool (FDT) interface EN 62453-1 -
specification -- Part 1: Overwiew and
guidance
IEC 62453-2 -  Field Device Tool (FDT) Interface EN 62453-2 -
Specification - Part 2: Concepts and
detailed Description


3

---------------------- Page: 5 ----------------------

SIST EN 62453-309:2018

---------------------- Page: 6 ----------------------

SIST EN 62453-309:2018




IEC 62453-309

®


Edition 2.0 2016-06




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Field device tool (FDT) interface specification –

Part 309: Communication profile integration – IEC 61784 CPF 9




Spécification des interfaces des outils des dispositifs de terrain (FDT) –

Partie 309: Intégration des profils de communication – CPF 9 de l'IEC 61784
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 25.040.40; 35.100.05; 35.110 ISBN 978-2-8322-3464-8



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62453-309:2018
– 2 – IEC 62453-309:2016  IEC 2016
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references. 8
3 Terms, definitions, symbols, abbreviated terms and conventions. 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms . 9
3.3 Conventions . 9
3.3.1 Data type names and references to data types . 9
3.3.2 Vocabulary for requirements . 9
3.3.3 Use of UML . 9
4 Bus category . 9
5 Access to instance and device data . 11
5.1 General . 11
5.2 Process Channel objects provided by DTM . 11
5.3 DTM services to access instance and device data . 12
6 Protocol-specific behavior . 12
6.1 Overview. 12
6.2 Burst mode subscription . 12
6.3 Usage of device addressing information . 13
6.4 Extended Command Numbers . 14
6.5 Handling of communication failures and time-outs . 14
6.6 Handling of Delayed Responses . 14
6.7 Topologies with mixed HART protocols . 16
6.7.1 General . 16
6.7.2 Behavior of DTMs supporting ‘Extended_HART’ only . 16
6.7.3 Behavior of DTMs supporting ‘Extended_HART’ and ‘HART’ . 16
6.7.4 Behavior of DTMs that requires ‘Extended_HART’ or ‘HART’ . 17
6.8 Nested communication with multiple gateways . 18
6.9 Communication- and network structures in WirelessHART . 18
6.9.1 General . 18
6.9.2 Network topology . 19
7 Protocol-specific usage of general data types . 21
8 Protocol-specific common data types . 22
9 Network management data types . 22
9.1 General . 22
9.2 Addressing modes . 22
9.3 Address information . 23
9.4 Additional address information for ‘Extended HART’ protocols . 23
10 Communication data types . 25
10.1 General . 25
10.2 Protocol-specific Addressing Information . 26
10.3 Datatype definitions . 26
11 Channel parameter data types . 30
12 Device identification . 33

---------------------- Page: 8 ----------------------

SIST EN 62453-309:2018
IEC 62453-309:2016  IEC 2016 – 3 –
12.1 Protocol-specific handling of data type STRING . 33
12.2 Address Range for Scan . 33
12.3 Support for Extended Manufacturer and Device Type Code . 33
12.4 Device type identification data types for protocol ‘HART’ . 33
12.5 Common device type identification data types for ‘Extended_HART’
protocols . 37
12.6 Topology scan data types . 42
12.7 Scan identification data types for protocol ‘HART’ . 43
12.8 Scan identification data types for ‘Extended_HART’ protocols . 45
12.9 Device type identification data types – provided by DTM . 47
Bibliography . 49

Figure 1 – Part 309 of the IEC 62453 series . 7
Figure 2 – Burst mode subscription . 13
Figure 3 – Handling of Delayed Reponses (scenario 1) . 15
Figure 4 – Handling of Delayed Reponses (scenario 2) . 15
Figure 5 – Behavior of DTMs supporting ‘Extended_HART’ and ‘HART’ . 17
Figure 6 – Behavior of DTMs requires ‘Extended_HART’ or ‘HART’ . 18
Figure 7 – Host connected to a WirelessHART gateway device . 19
Figure 8 – FDT Topology of a WirelessHART network . 20
Figure 9 – Host connected to HART FSK . 20
Figure 10 – FDT Topology when directly connected to a WirelessHART adapter device . 21

Table 1 – Protocol identifiers . 9
Table 2 – Definition of PhysicalLayer . 10
Table 3 – Protocol specific usage of general data types . 22
Table 4 – Relation of ProtocolId and supported features . 23
Table 5 – Simple address information data types . 24
Table 6 – Structured address information data types . 25
Table 7 – Simple communication data types . 26
Table 8 – Structured communication data types . 28
Table 9 – Simple channel parameter data types . 31
Table 10 – Structured channel parameter data types . 31
Table 11 – Address range for device identification . 33
Table 12 – Identification data types with protocol-specific mapping for protocol ‘HART’ . 34
Table 13 – Identification data types with semantics for protocol ‘HART’ . 36
Table 14 – Simple identification data types for protocol ‘HART’ with protocol
independent semantics . 37
Table 15 – Structured identification data types for protocol ‘HART’ with protocol
independent semantics . 37
Table 16 – Identification data types for ‘Extended_HART’ protocols with protocol-
specific mapping . 38
Table 17 – Identification data types for ‘Extended_HART’ protocols without protocol
independent semantics . 41
Table 18 – Simple identification data types for ‘Extended_HART’ protocols with
protocol independent semantics . 42

---------------------- Page: 9 ----------------------

SIST EN 62453-309:2018
– 4 – IEC 62453-309:2016  IEC 2016
Table 19 – Structured identification data types for ‘Extended_HART’ protocols with
protocol independent semantics . 42
Table 20 – Structured device type identification data types . 43
Table 21 – Simple scan identification data types for protocol ‘HART’ . 43
Table 22 – Structured scan identification data types for protocol ‘HART’ . 43
Table 23 – Simple scan identification data types for ‘Extended_HART’ protocols . 45
Table 24 – Structured scan identification data types for ‘Extended_HART’ protocols . 45
Table 25 – Structured device type identification data types . 47

---------------------- Page: 10 ----------------------

SIST EN 62453-309:2018
IEC 62453-309:2016  IEC 2016 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 309: Communication profile integration –
IEC 61784 CPF 9

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62453-309 has been prepared by subcommittee 65E: Devices and
integration in enterprise systems, of IEC technical committee 65: Industrial-process
measurement, control and automation.
This second edition cancels and replaces the first edition published in 2009, and constitutes a
technical revision. The main changes are provided in order to provide improved support for
updates of the HART protocol (see 6.7 and the updated datatypes in Clauses 9, 10, and 12)
and to support introduction of the technology according to IEC 62453-42 [1] (see Clause 4).
Each part of the IEC 62453-3xy series is intended to be read in conjunction with IEC 62453-2.

---------------------- Page: 11 ----------------------

SIST EN 62453-309:2018
– 6 – IEC 62453-309:2016  IEC 2016
The text of this standard is based on the following documents:
CDV Report on voting
65E/336/CDV 65E/395A/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 62453 series, under the general title Field Device Tool (FDT)
interface specification, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 12 ----------------------

SIST EN 62453-309:2018
IEC 62453-309:2016  IEC 2016 – 7 –
INTRODUCTION
This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool)
components for function control and data access within a client/server architecture. The
specification is a result of an analysis and design process to develop standard interfaces to
facilitate the development of servers and clients by multiple vendors that need to interoperate
seamlessly.
With the integration of fieldbusses into control systems, there are a few other tasks which
need to be performed. In addition to fieldbus- and device-specific tools, there is a need to
integrate these tools into higher-level system-wide planning or engineering tools. In particular,
for use in extensive and heterogeneous control systems, typically in the area of the process
industry, the unambiguous definition of engineering interfaces that are easy to use for all
those involved is of great importance.
A device-specific software component, called DTM (Device Type Manager), is supplied by the
field device manufacturer with its device. The DTM is integrated into engineering tools via the
FDT interfaces defined in this specification. The approach to integration is in general open for
all kind of fieldbusses and thus meets the requirements for integrating different kinds of
devices into heterogeneous control systems.
Figure 1 shows how IEC 62453-309 is aligned in the structure of the IEC 62453 series.
Part 309
Communication
profile integration -
IEC 61784 CPF 9
IEC

Figure 1 – Part 309 of the IEC 62453 series

---------------------- Page: 13 ----------------------

SIST EN 62453-309:2018
– 8 – IEC 62453-309:2016  IEC 2016
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 309: Communication profile integration –
IEC 61784 CPF 9



1 Scope
1
Communication Profile Family 9 (commonly known as HART® ) defines communication
profiles based on IEC 61158-5-20 and IEC 61158-6-20. The basic profile CP 9/1 is defined in
IEC 61784-1.
This part of IEC 62453 provides information for integrating the HART® technology into the
FDT standard (IEC 62453-2).
This part of the IEC 62453 specifies communication and other services.
This standard neither contains the FDT specification nor modifies it.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 61158-5-20, Industrial communication networks – Fieldbus specifications – Part 5-20:
Application layer service definition – Type 20 elements
IEC 61158-6-20, Industrial communication networks – Fieldbus specifications – Part 6-20:
Application layer protocol specification – Type 20 elements
IEC 61784-1, Industrial communication networks – Profiles – Part 1: Fieldbus profiles
2
IEC 62453-1:– , Field device tool (FDT) interface specification – Part 1: Overview and
guidance
2
IEC 62453-2:– , Field device tool (FDT) interface specification – Part 2: Concepts and
detailed description
3 Terms, definitions, symbols, abbreviated terms and conventions
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 62453-1 and
IEC 62453-2, as well as the following apply.
—————————
1
 HART ® is the trade name of the product supplied by HART Communication Foundation. This information is
given for convenience of users of this document and does not constitute an endorsement by IEC of the product
named. Equivalent products may be used if they can be shown to lead to the same results.
2
 To be published concurrently with this standard.

---------------------- Page: 14 ----------------------

SIST EN 62453-309:2018
IEC 62453-309:2016  IEC 2016 – 9 –
3.1.1
burst mode
mode in which the field device generates response telegrams without request telegram from
the master
3.2 Abbreviated terms
For the purposes of this document, the abbreviations given in IEC 62453-1, IEC 62453-2, as
well as the following apply.
BACK Burst ACKnowledge
C8PSK Coherent 8-way Phase Shift Keying,
HART communication layer as defined in HCF_SPEC-60, Revision 1.0
DR Delayed Response
EDD Electronic Device Description
FSK Frequency Shift Keying,
HART communication layer as defined in HCF_SPEC-54, Revision 8.1
HART Highway Addressable Remote Transducer

3.3 Conventions
3.3.1 Data type names and references to data types
The conventions for naming and referencing of data types are explained in IEC 62453-2:–,
Clause A.1.
3.3.2 Vocabulary for requirements
The following expressions are used when specifying requirements.
Usage of “shall” or “mandatory” No exceptions allowed.
Usage of “should” or Strong recommendation. It may make sense in
“recommended” special exceptional cases to differ from the
described behaviour.
Usage of “can’ or “optional’ Function or behaviour may be provided,
depending on defined conditions.
3.3.3 Use of UML
Figures in this document are using UML notation as defined in IEC 62453-1:–, Annex A.
4 Bus category
IEC 61784 CPF 9 protocol is identified in the protocolId element of structured data type
'fdt:BusCategory' by the following unique identifiers (see Table 1):
Table 1 – Protocol identifiers
Identifier value ProtocolId Display String Description
036D1498-387B-11D4-86E1- HART ‘HART’ Support of IEC 61784 CPF 9
00E0987270B9 protocol
98503B8F-0FFB-4EB7-BB67- HART_FSK ‘HART FSK’ Support of HART protocol over
F4D6BD16DB8D FSK communication
74D29D22-F752-40EF-A747- HART_Wireless ‘HART Wireless’ Support of WirelessHART protocol
ACA72C791155

---------------------
...