iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST CR 12793:2001

(Main)

Measurement of the carbonation depth of hardened concrete

Measurement of the carbonation depth of hardened concrete

No scope available

Merjenje globine karbonatizacije strjenega betona

General Information

Status
Published
Publication Date
31-Jan-2001
ICS
91.100.30 - Concrete and concrete products
Technical Committee
CAA - Mineral binders and masonry
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2001
Due Date
01-Feb-2001
Completion Date
01-Feb-2001
Directive
89/106/EEC - Construction products
Ref Project
CR 12793:1997 - Measurement of the carbonation depth of hardened concrete

Buy Standard

CR 12793:2001CR 12793:2001
PreviousNext
Standardization document
CR 12793:2001
English language
63 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST CR 12793:2001
01-februar-2001
Merjenje globine karbonatizacije strjenega betona
Measurement of the carbonation depth of hardened concrete
Ta slovenski standard je istoveten z: CR 12793:1997
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST CR 12793:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST CR 12793:2001

---------------------- Page: 2 ----------------------

SIST CR 12793:2001

---------------------- Page: 3 ----------------------

SIST CR 12793:2001

---------------------- Page: 4 ----------------------

SIST CR 12793:2001

---------------------- Page: 5 ----------------------

SIST CR 12793:2001

---------------------- Page: 6 ----------------------

SIST CR 12793:2001

---------------------- Page: 7 ----------------------

SIST CR 12793:2001

---------------------- Page: 8 ----------------------

SIST CR 12793:2001

---------------------- Page: 9 ----------------------

SIST CR 12793:2001

---------------------- Page: 10 ----------------------

SIST CR 12793:2001

---------------------- Page: 11 ----------------------

SIST CR 12793:2001

---------------------- Page: 12 ----------------------

SIST CR 12793:2001

---------------------- Page: 13 ----------------------

SIST CR 12793:2001

---------------------- Page: 14 ----------------------

SIST CR 12793:2001

---------------------- Page: 15 ----------------------

SIST CR 12793:2001

---------------------- Page: 16 ----------------------

SIST CR 12793:2001

---------------------- Page: 17 ----------------------

SIST CR 12793:2001

---------------------- Page: 18 ----------------------

SIST CR 12793:2001

---------------------- Page: 19 ----------------------

SIST CR 12793:2001

---------------------- Page: 20 ----------------------

SIST CR 12793:2001

---------------------- Page: 21 ----------------------

SIST CR 12793:2001

---------------------- Page: 22 ----------------------

SIST CR 12793:2001

---------------------- Page: 23 ----------------------

SIST CR 12793:2001

---------------------- Page: 24 ----------------------

SIST CR 12793:2001

---------------------- Page: 25 ----------------------

SIST CR 12793:2001

---------------------- Page: 26 ----------------------

SIST CR 12793:2001

---------------------- Page: 27 ----------------------

SIST CR 12793:2001

---------------------- Page: 28 ----------------------

SIST CR 12793:2001

---------------------- Page: 29 ----------------------

SIST CR 12793:2001

---------------------- Page: 30 ----------------------

SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TS CEN/TS 12390-9:2017(Main)
Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling
CEN/TS 12390-9:2016

This draft Technical Specification describes the testing of the freeze-thaw scaling resistance of concrete both with water and with sodium chloride solution. It can be used either to compare new constituents or new concrete compositions against a constituent or a concrete composition that is known to give adequate performance in the local environment or to assess the test results against some absolute numerical values based on local experiences.
Extrapolation of test results to assess different concretes, i.e. new constituents or new concrete compositions, requires an expert evaluation.
NOTE   In some cases the test methods may not be suitable for testing special concretes e.g. high strength concrete or permeable concrete. In these cases the result needs to be treated with caution. Also, the testing methods included in this document may not identify aggregates that are subject to occasional ‘pop-outs’.
There is no established correlation between the results obtained by the three test methods. All tests will clearly identify poor and good behaviour, but they differ in their assessment of marginal behaviour. The application of different acceptance limits for test results enables assessment for different degrees of exposure severity. Change of parameters of the testing procedure may have artefacts, some of which explained in Annex A.

  • Technical specification
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 771-3:2011+A1:2015(Main)
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
EN 771-3:2011+A1:2015

This European Standard specifies the characteristics and performance requirements of aggregate concrete masonry units made from dense and lightweight aggregates or a combination of both for which the main intended uses are common, facing or exposed masonry in load bearing or non-load bearing building and civil engineering applications. The units are suitable for all forms of walling, including single leaf, external leaf to chimneys, cavity wall, partitions, retaining, and basement. They can provide fire protection, thermal insulation, sound insulation and sound absorption.
This European Standard includes aggregate concrete masonry units of an overall non-rectangular parallelepiped shape, !specially" shaped and accessory units.
It defines the performance related to e.g. strength, density, dimensional accuracy, and provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard. The marking requirement for products covered by this European Standard is included.
This European Standard does not specify standard sizes for aggregate concrete masonry units, nor standard work dimensions and angles of specially shaped aggregate concrete masonry units. It does not cover storey height panels, chimney flue linings nor units intended for use as a damp proof course. It does not cover units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 771-4:2011+A1:2015(Main)
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
EN 771-4:2011+A1:2015

This European Standard specifies the characteristics and performance requirements of autoclaved aerated concrete (AAC) masonry units for which the main intended uses are different types of load bearing and non-load bearing applications in all forms of walling including single leaf, cavity, partitions, retaining, basement and general use below ground level, including walling for fire protection, thermal insulation, sound insulation and the fabric of chimneys (excluding chimney flue units).
This European Standard includes AAC masonry units with an incorporated insulation not exposed to fire, and masonry units of an overall rectangular parallelepiped shape, specially shaped and accessory units. AAC masonry units may consist of layers of different densities where not all of the layers are loadbearing.
It provides for the assessment and verification of constancy of performance (AVCP) of the product to this European Standard.
The marking requirement for products covered by this European Standard is included.
This European Standard does not cover the requirements for storey height panels, flue linings and masonry units with an incorporated thermal insulation material bonded to the faces of the unit susceptible to be exposed to fire. It does not specify standard sizes for autoclaved aerated concrete units nor standard work dimensions and angles of specially shaped and accessory units. It does not give permissible deviations for specially shaped and accessory units. It does not cover products intended for use as a damp proof course or the lining of a chimney.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 772-11:2011(Main)
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
EN 772-11:2011

This European Standard specifies a method of determining the water absorption coefficient due to capillary action for aggregate concrete, autoclaved aerated concrete, natural stone and manufactured stone masonry units and the initial rate of water absorption for clay masonry units.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 16142:2011(Main)
Concrete - A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment
CEN/TR 16142:2011

At the initiative of CEN/TC 51 (Cement and building limes) and CEN/TC 104 (Concrete and related products), a task group (TG 6) of TC 51/WG 12 was convened in order to accompany or follow research work being carried out within the EC research programme which has the objective of establishing the effects, if any, of concrete on the natural environment and the potential effects of cementitious materials on the quality of drinking water.
This report deals only with developments, as officially reported, by a consortium of Dutch/German Institutes, to the European Commission in EUR 17869 EN [1], leading to a performance test method for characterising the leaching behaviour of hardened concrete for  use in contact with the natural environment.

  • Technical report
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 15678:2008(Main)
Concrete - Release of regulated dangerous substances into soil, groundwater and surface water - Test method for new or unapproved constituents of concrete and for production concretes
CEN/TR 15678:2008

This document outlines three test methods.  The first is designed to test the constituents of concrete, not designated as WT products, using reference concrete matrices (control mixes and test mixes) wherein the release of (regulated) dangerous substances from the constituent under test, into soil, groundwater or surface water, can be determined.  The types of constituent which can be tested using this method are as follows:
a)   factory-made cements;
b)   aggregates;
c)   additions type I;
d)   additions type II;
e)   admixtures;
f)   polymer modifiers;
g)   fibres.
The second method, in normative Annex A, is designed to test factory made concrete products, not designated as WT products, as either test pieces sawn or cored from pre-hardened monoliths or as standard-sized moulded test pieces formed from proxy samples of fresh wet material taken from concrete used in the production of factory made items.
The third method, in informative Annex B, is designed to test concretes sampled in the fresh wet state or pre-packaged state, not officially classified as WT products, as standard-sized moulded test pieces.
All three methods produce eluates that may be used for the purposes of characterisation testing, initial type testing (ITT) or further testing (FT) of either the constituents of concrete identified in this Scope or of production concretes.

  • Technical report
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 196-4:2008(Main)
Methods of testing cement - Part 4: Quantitative determination of constituents
CEN/TR 196-4:2007

This European Technical Report describes procedures for determining the contents of most of the constituents of the cements that fall within the scope of EN 197-1.
In principle, the method described in Clause 6 applies to all cements, whatever the number and nature of their constituents, but in practice is limited to the cements identified in Table 1.
The method in clause 6 should be considered to be the method of choice and is based on a sequential selective dissolution of the cement’s constituents, generally of an unknown number, where they are not available separately for analysis at the same time as the cement.
The method of choice enables the quantitative determination (by mass) of: Portland cement clinker, blastfurnace slag, siliceous fly ash, natural pozzolans, limestone, silica fume and set regulators in cements of the types identified in Table 1. Table 1 is derived from Table 1 of EN 197-1.
NOTE 1   Where cements contain calcareous fly ash, burnt shale and/or constituents that partly contain mineral phases, similar to those of clinker, further investigation into the characteristics of those constituents will be necessary before the method can be applied.
The method of choice has limitations, as indicated earlier, and cannot be considered to be a means by which clinker content can simply be determined in isolation from any other constituent. Clinker content is determined ‘by difference’ and other constituents contain, in part, mineral phases similar to those present in clinker and can cause interferences that lead to difficulties in interpretation of the results.
Where apparently anomalous results are obtained, it is recommended that further investigations are undertaken in accordance with the procedure given in Section 6.2.5.4.
Any other method with the same objectives, and intended for use where the constituents are unavailable for separate analysis, can be considered to be an alternative to the method of choice when it is shown that, with appropriate statistical validity, it gives equivalent results. In individual cases, where the laboratory has been formally advised that: - the cement contains only two constituents, the method is greatly simplified because it is sufficient to determine the set regulator content (R) in order to be able to calculate the clinker content by difference; - the cement contains only three constituents, i.e. a set regulator, clinker and one of the following three: slag, pozzolana or siliceous fIy ash. Some of the methods in clause 7 are variations on the method of choice whereas others are based on physical separation of constituents and different analytical principles.

  • Technical report
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 15177:2006(Main)
Testing the freeze-thaw resistance of concrete - Internal structural damage
CEN/TR 15177:2006

This document specifies three test methods for the estimation of the freeze-thaw resistance of concrete with regard to internal structural damage. It can be used either to compare new constituents or new concrete compositions against a constituent or a concrete composition that is known to give adequate performance in the local environment or to assess the test results against some absolute numerical values based on local experiences.
Extrapolation of test results to assess different concrete i.e. new constituents or new concrete compositions requires an expert evaluation.
NOTE   Specification based on these test methods should take into account the behaviour of concrete under practical conditions.
There is no established correlation between the results obtained by the three test methods. All tests will clearly identify poor and good behaviour, but they differ in their assessment of marginal behaviour.

  • Technical report
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 772-20:2000/A1:2005(Amendment)
Methods of test for masonry units - Part 20: Determination of flatness of faces of masonry units
EN 772-20:2000/A1:2005

2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 772-14:2002(Main)
Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units
EN 772-14:2001

This European Standard specifies a method of measuring the moisture movement of aggregate concrete and manufactured stone masonry units between two specified extreme moisture conditions.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day