SIST EN 772-11:2011
(Main)Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
This European Standard specifies a method of determining the water absorption coefficient due to capillary action for aggregate concrete, autoclaved aerated concrete, natural stone and manufactured stone masonry units and the initial rate of water absorption for clay masonry units.
Prüfverfahren für Mauersteine - Teil 11: Bestimmung der kapillaren Wasseraufnahme von Mauersteinen aus Beton, Porenbetonsteinen, Betonwerksteinen und Natursteinen sowie der anfänglichen Wasseraufnahme von Mauerziegeln
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Wasseraufnahmekoeffizienten infolge Kapillarwirkung von Mauersteinen aus Beton, Porenbetonsteinen, Natursteinen und Betonwerksteinen sowie der anfänglichen Wasseraufnahme von Mauerziegeln fest.
Méthodes d'essai des éléments de maçonnerie - Partie 11: Détermination de l'absorption de l'eau par capillarité des éléments de maçonnerie en béton de granulats, en béton cellulaire autoclavé, en pierre reconstituée et naturelle et du taux initial d'absorption d'eau des éléments de maçonnerie en terre cuite
La présente Norme européenne spécifie une méthode permettant de déterminer le coefficient d'absorption d'eau par capillarité des éléments de maçonnerie en béton de granulats, en béton cellulaire autoclavé, en pierre naturelle et en pierre reconstituée, et le taux initial d'absorption d'eau des éléments de maçonnerie en terre cuite.
Metode preskušanja zidakov - 11. del: Ugotavljanje kapilarnega vpijanja vode betonskih zidakov, zidakov iz avtoklaviranega celičastega betona ter zidakov iz umetnega in naravnega kamna in začetna stopnja vpijanja vode opečnih zidakov
Ta evropski standard določa metodo za ugotavljanje koeficienta kapilarnega vpijanja vode betonskih zidakov, zidakov iz avtoklaviranega celičastega betona, zidakov iz naravnega in umetnega kamna ter začetne stopnje vpijanja vode opečnih zidakov.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfverfahren für Mauersteine - Teil 11: Bestimmung der kapillaren Wasseraufnahme von Mauersteinen aus Beton, Porenbetonsteinen, Betonwerksteinen und Natursteinen sowie der anfänglichen Wasseraufnahme von MauerziegelnMéthodes d'essai des éléments de maçonnerie - Partie 11: Détermination de l'absorption de l'eau par capillarité des éléments de maçonnerie en béton de granulats, en béton cellulaire autoclavé, en pierre reconstituée et naturelle et du taux initial d'absorption d'eau des éléments de maçonnerie en terre cuiteMethods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units91.100.30Beton in betonski izdelkiConcrete and concrete products91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 772-11:2011SIST EN 772-11:2011en,fr,de01-julij-2011SIST EN 772-11:2011SLOVENSKI
STANDARDSIST EN 772-11:2000/A1:2004SIST EN 772-11:20001DGRPHãþD
SIST EN 772-11:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 772-11
May 2011 ICS 91.100.15; 91.100.30 Supersedes EN 772-11:2000English Version
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
Méthodes d'essai des éléments de maçonnerie -Partie 11: Détermination de l'absorption de l'eau par capillarité des éléments de maçonnerie en béton de granulats, en béton cellulaire autoclavé, en pierre reconstituée et naturelle et dutaux initial d'absorption d'eau des éléments de maçonnerie en terre cuite
Prüfverfahren für Mauersteine - Teil 11: Bestimmung der kapillaren Wasseraufnahme von Mauersteinen aus Beton, Porenbetonsteinen, Betonwerksteinen und Natursteinen sowie der anfänglichen Wasseraufnahme von Mauerziegeln This European Standard was approved by CEN on 25 December 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 772-11:2011: ESIST EN 772-11:2011
EN 772-11:2011 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Principle .44Symbols .45Apparatus.56Preparation of specimens .57Test procedure .58Calculation and expression of results .69Evaluation of results .610Test report .7Annex A (informative)
Significant technical changes between this European standard and the previous edition .8 SIST EN 772-11:2011
EN 772-11:2011 (E) 3 Foreword This document (EN 772-11:2011) has been prepared by Technical Committee CEN/TC 125 “Masonry”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2011, and conflicting national standards shall be withdrawn at the latest by November 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 772-11:2000. Annex A provides details of significant technical changes between this European Standard and the previous edition. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 772-11:2011
EN 772-11:2011 (E) 4 1 Scope This European Standard specifies a method of determining the water absorption coefficient due to capillary action for aggregate concrete, autoclaved aerated concrete, natural stone and manufactured stone masonry units and the initial rate of water absorption for clay masonry units. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 771-1, Specification for masonry units — Part 1: Clay masonry units EN 771-2, Specification for masonry units — Part 2: Calcium silicate masonry units EN 771-3, Specification for masonry units — Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates) EN 771-4, Specification for masonry units — Part 4: Autoclaved aerated concrete masonry units EN 771-5, Specification for masonry units — Part 5: Manu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.