SIST EN ISO 13503-2:2007/A1:2010

Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations - Amendment 1: Addition of Annex B: Proppand specification (ISO 13503-2:2006/Amd 1:2009)

ISO/TC 67 resolution 9/2007 - Draft amendment not approved.

Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten und -materialien - Teil 2: Messung der Eigenschaften von Stützmaterialien zum Einsatz bei hydraulischen Fraktionierungs- und in Kiespackungsvorgängen (ISO 13503-2:2006/Amd 1:2009)

Industries du pétrole et du gaz naturel - Fluides de complétion et matériaux - Partie 2: Mesurage des propriétés des matériaux de soutènement utilisés dans les opérations de fracturation hydraulique et de remplissage de gravier - Amendement 1: Ajout de l'Annexe B: Spécifications relatives aux matériaux de soutènement (ISO 13503-2:2006/Amd 1:2009)

Industrija za predelavo nafte in zemeljskega plina - Tekočine in materiali za zaključna dela - 2. del: Merjenje lastnosti podpornih materialov, ki se uporabljajo v postopkih frakcioniranja in pri filtrskih zasipih s prodom - Dopolnilo 1 (ISO 13503-2:2006/Amd 1:2009)

Amandma A1:2010 je dodatek k standardu SIST EN ISO 13503-2:2007.
Ta del ISO 13503 zagotavlja standardne postopke preskušanja za ocenjevanje podpornih materialov, ki se uporabljajo v postopkih frakcioniranja in pri filtrskih zasipih s prodom.

General Information

• Status: Published
• Public Enquiry End Date: 30-Apr-2008
• Publication Date: 14-Dec-2009
• ICS: 75.100 - Lubricants, industrial oils and related products
• ICS: 75.180.30 - Volumetric equipment and measurements
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 10-Nov-2009
• Due Date: 15-Jan-2010
• Completion Date: 15-Dec-2009
• Ref Project: EN ISO 13503-2:2006/A1:2009 - Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations - Amendment 1: Addition of Annex B: Proppand specification (ISO 13503-2:2006/Amd 1:2009)

Relations

• Amends: SIST EN ISO 13503-2:2007 - Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations (ISO 13503-2:2006)
• Effective Date: 01-Jan-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13503-2:2007/A1:2010
01-januar-2010
Industrija za predelavo nafte in zemeljskega plina - Tekočine in materiali za
zaključna dela - 2. del: Merjenje lastnosti podpornih materialov, ki se uporabljajo v
postopkih frakcioniranja in pri filtrskih zasipih s prodom - Dopolnilo 1 (ISO 13503-
2:2006/Amd 1:2009)
Petroleum and natural gas industries - Completion fluids and materials - Part 2:
Measurement of properties of proppants used in hydraulic fracturing and gravel-packing
operations - Amendment 1: Addition of Annex B: Proppand specification (ISO 13503-
2:2006/Amd 1:2009)
Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten und -materialien - Teil 2:
Messung der Eigenschaften von Stützmaterialien zum Einsatz bei hydraulischen
Fraktionierungs- und in Kiespackungsvorgängen (ISO 13503-2:2006/Amd 1:2009)
Industries du pétrole et du gaz naturel - Fluides de complétion et matériaux - Partie 2:
Mesurage des propriétés des matériaux de soutènement utilisés dans les opérations de
fracturation hydraulique et de remplissage de gravier - Amendement 1: Ajout de l'Annexe
B: Spécifications relatives aux matériaux de soutènement (ISO 13503-2:2006/Amd
1:2009)
Ta slovenski standard je istoveten z: EN ISO 13503-2:2006/A1:2009
ICS:
75.100 Maziva Lubricants, industrial oils and
related products
75.180.30 Oprema za merjenje Volumetric equipment and
prostornine in merjenje measurements
SIST EN ISO 13503-2:2007/A1:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13503-2:2007/A1:2010

---------------------- Page: 2 ----------------------
SIST EN ISO 13503-2:2007/A1:2010


EUROPEAN STANDARD
EN ISO 13503-2:2006/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2009
ICS 75.100
English Version
Petroleum and natural gas industries - Completion fluids and
materials - Part 2: Measurement of properties of proppants used
in hydraulic fracturing and gravel-packing operations -
Amendment 1: Addition of Annex B: Proppand specification (ISO
13503-2:2006/Amd 1:2009)
Industries du pétrole et du gaz naturel - Fluides de Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten
complétion et matériaux - Partie 2: Mesurage des und -materialien - Teil 2: Messung der Eigenschaften von
propriétés des matériaux de soutènement utilisés dans les Stützmaterialien zum Einsatz bei hydraulischen
opérations de fracturation hydraulique et de remplissage de Fraktionierungs- und in Kiespackungsvorgängen (ISO
gravier - Amendement 1: Ajout de l'Annexe B: 13503-2:2006/Amd 1:2009)
Spécifications relatives aux matériaux de soutènement
(ISO 13503-2:2006/Amd 1:2009)
This amendment A1 modifies the European Standard EN ISO 13503-2:2006; it was approved by CEN on 7 October 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13503-2:2006/A1:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 13503-2:2007/A1:2010
EN ISO 13503-2:2006/A1:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 13503-2:2007/A1:2010
EN ISO 13503-2:2006/A1:2009 (E)
Foreword
This document (EN ISO 13503-2:2006/A1:2009) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 13503:2006 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and
conflicting national standards shall be withdrawn at the latest by May 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 13503-2:2006/Amd 1:2009 has been approved by CEN as a EN ISO 13503-2:2006/A1:2009
without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 13503-2:2007/A1:2010

---------------------- Page: 6 ----------------------
SIST EN ISO 13503-2:2007/A1:2010

INTERNATIONAL ISO
STANDARD 13503-2
First edition
2006-11-01
AMENDMENT 1
2009-11-01


Petroleum and natural gas industries —
Completion fluids and materials —
Part 2:
Measurement of properties of proppants
used in hydraulic fracturing and gravel-
packing operations
AMENDMENT 1: Addition of Annex B:
Proppand specification
Industries du pétrole et du gaz naturel — Fluides de complétion et
matériaux —
Partie 2: Mesurage des propriétés des matériaux de soutènement
utilisés dans les opérations de fracturation hydraulique et de
remplissage de gravier
AMENDEMENT 1: Ajout de l'Annexe B: Spécifications relatives aux
matériaux de soutènement





Reference number
ISO 13503-2:2006/Amd.1:2009(E)
©
ISO 2009

---------------------- Page: 7 ----------------------
SIST EN ISO 13503-2:2007/A1:2010
ISO 13503-2:2006/Amd.1:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
...

SLOVENSKI STANDARD
SIST EN ISO 13503-2:2007/oprA1:2008
01-april-2008
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD7HNRþLQHLQPDWHULDOL]D
]DNOMXþQDGHODGHO0HUMHQMHODVWQRVWLSRGSRUQLKPDWHULDORYNLVHXSRUDEOMDMRY
SRVWRSNLKIUDNFLRQLUDQMDLQSULILOWUVNLK]DVLSLKVSURGRP'RSROQLOR,62

Petroleum and natural gas industries - Completion fluids and materials - Part 2:
Measurement of properties of proppants used in hydraulic fracturing and gravel-packing
operations - Amendment 1 (ISO 13503-2:2006/DAM 1:2008)
Industries du pétrole et du gaz naturel - Fluides de complétion et matériaux - Partie 2:
Mesurage des propriétés des matériaux de soutènement utilisés dans les opérations de
fracturation hydraulique et de remplissage de gravier - Amendement 1 (ISO 13503-
2:2006/DAM 1:2008)
Ta slovenski standard je istoveten z: EN ISO 13503-2:2006/prA1
ICS:
75.100
SIST EN ISO 13503-2:2007/oprA1:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
DRAFT
EN ISO 13503-2:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2008
ICS 75.100

English Version
Petroleum and natural gas industries - Completion fluids and
materials - Part 2: Measurement of properties of proppants used
in hydraulic fracturing and gravel-packing operations -
Amendment 1 (ISO 13503-2:2006/DAM 1:2008)
Industries du pétrole et du gaz naturel - Fluides de
complétion et matériaux - Partie 2: Mesurage des
propriétés des matériaux de soutènement utilisés dans les
opérations de fracturation hydraulique et de remplissage de
gravier - Amendement 1 (ISO 13503-2:2006/DAM 1:2008)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 12.
This draft amendment A1, if approved, will modify the European Standard EN ISO 13503-2:2006. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13503-2:2006/prA1:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 13503-2:2006/prA1:2008 (E)
Foreword
This document (EN ISO 13503-2:2006/prA1:2008) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in collaboration with
Technical Committee CEN/TC 12 "Materials, equipment and offshore structures for petroleum, petrochemical
and natural gas industries", the secretariat of which is held by AFNOR.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO/DAM 13503-2:2008 has been approved by CEN as a EN ISO 13503-2:2006/prA1:2008
without any modification.


2

---------------------- Page: 3 ----------------------

DRAFT AMENDMENT ISO 13503-2:2006/DAmd 1
ISO/TC 67/SC 3 Secretariat: SN
Voting begins on: Voting terminates on:
2008-01-31 2008-06-30
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Petroleum and natural gas industries — Completion fluids and
materials —
Part 2:
Measurement of properties of proppants used in hydraulic
fracturing and gravel-packing operations
AMENDMENT 1
Industries du pétrole et du gaz naturel — Fluides de complétion et matériaux —
Partie 2: Mesurage des propriétés des matériaux de soutènement utilisés dans les opérations de fracturation
hydraulique et de remplissage de gravier
AMENDEMENT 1
ICS 75.100

ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2008

---------------------- Page: 4 ----------------------

ISO 13503-2:2006/DAmd 1
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2008 – All rights reserved

---------------------- Page: 5 ----------------------

ISO/DIS 13503-2/Amd.1
Contents Page
Foreword.
...

SLOVENSKI STANDARD
SIST EN ISO 13503-2:2007/A1:2010
01-januar-2010
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD7HNRþLQHLQPDWHULDOL]D
]DNOMXþQDGHODGHO0HUMHQMHODVWQRVWLSRGSRUQLKPDWHULDORYNLVHXSRUDEOMDMRY
SRVWRSNLKIUDNFLRQLUDQMDLQSULILOWUVNLK]DVLSLKVSURGRP'RSROQLOR,62
$PG
Petroleum and natural gas industries - Completion fluids and materials - Part 2:
Measurement of properties of proppants used in hydraulic fracturing and gravel-packing
operations - Amendment 1: Addition of Annex B: Proppand specification (ISO 13503-
2:2006/Amd 1:2009)
Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten und -materialien - Teil 2:
Messung der Eigenschaften von Stützmaterialien zum Einsatz bei hydraulischen
Fraktionierungs- und in Kiespackungsvorgängen (ISO 13503-2:2006/Amd 1:2009)
Industries du pétrole et du gaz naturel - Fluides de complétion et matériaux - Partie 2:
Mesurage des propriétés des matériaux de soutènement utilisés dans les opérations de
fracturation hydraulique et de remplissage de gravier - Amendement 1: Ajout de l'Annexe
B: Spécifications relatives aux matériaux de soutènement (ISO 13503-2:2006/Amd
1:2009)
Ta slovenski standard je istoveten z: EN ISO 13503-2:2006/A1:2009
ICS:
75.180.30 Oprema za merjenje Volumetric equipment and
prostornine in merjenje measurements
SIST EN ISO 13503-2:2007/A1:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13503-2:2007/A1:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 13503-2:2007/A1:2010


EUROPEAN STANDARD
EN ISO 13503-2:2006/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2009
ICS 75.100
English Version
Petroleum and natural gas industries - Completion fluids and
materials - Part 2: Measurement of properties of proppants used
in hydraulic fracturing and gravel-packing operations -
Amendment 1: Addition of Annex B: Proppand specification (ISO
13503-2:2006/Amd 1:2009)
Industries du pétrole et du gaz naturel - Fluides de Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten
complétion et matériaux - Partie 2: Mesurage des und -materialien - Teil 2: Messung der Eigenschaften von
propriétés des matériaux de soutènement utilisés dans les Stützmaterialien zum Einsatz bei hydraulischen
opérations de fracturation hydraulique et de remplissage de Fraktionierungs- und in Kiespackungsvorgängen (ISO
gravier - Amendement 1: Ajout de l'Annexe B: 13503-2:2006/Amd 1:2009)
Spécifications relatives aux matériaux de soutènement
(ISO 13503-2:2006/Amd 1:2009)
This amendment A1 modifies the European Standard EN ISO 13503-2:2006; it was approved by CEN on 7 October 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13503-2:2006/A1:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13503-2:2007/A1:2010
EN ISO 13503-2:2006/A1:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 13503-2:2007/A1:2010
EN ISO 13503-2:2006/A1:2009 (E)
Foreword
This document (EN ISO 13503-2:2006/A1:2009) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 13503:2006 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and
conflicting national standards shall be withdrawn at the latest by May 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 13503-2:2006/Amd 1:2009 has been approved by CEN as a EN ISO 13503-2:2006/A1:2009
without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 13503-2:2007/A1:2010

---------------------- Page: 6 ----------------------

SIST EN ISO 13503-2:2007/A1:2010

INTERNATIONAL ISO
STANDARD 13503-2
First edition
2006-11-01
AMENDMENT 1
2009-11-01


Petroleum and natural gas industries —
Completion fluids and materials —
Part 2:
Measurement of properties of proppants
used in hydraulic fracturing and gravel-
packing operations
AMENDMENT 1: Addition of Annex B:
Proppand specification
Industries du pétrole et du gaz naturel — Fluides de complétion et
matériaux —
Partie 2: Mesurage des propriétés des matériaux de soutènement
utilisés dans les opérations de fracturation hydraulique et de
remplissage de gravier
AMENDEMENT 1: Ajout de l'Annexe B: Spécifications relatives aux
matériaux de soutènement





Reference number
ISO 13503-2:2006/Amd.1:2009(E)
©
ISO 2009

---------------------- Page: 7 ----------------------

SIST EN ISO 13503-2:2007/A1:2010
ISO 13503-2:2006/Amd.1:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Sw
...