iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12592:2000

(Main)

Bitumen and bituminous binders - Determination of solubility

Bitumen and bituminous binders - Determination of solubility

This European Standard specifies a method for determining the degree of solubility of bituminous binders, having little or no mineral matter, other than recovered bituminous binders from asphalt mixes, in a specific solvent. Toluene is used as the solvent for referee tests. NOTE: Bituminous binders will have varying solubilities in different solvents. WARNING: The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use.

Bitumen und bitumenhaltige Bindemittel - Bestimmung der Löslichkeit

Diese Europäische Norm legt ein Verfahren fest zur Bestimmung des Löslichkeitsgrades eines bitumenhaltigen Bindemittels mit wenig oder keinen mineralischen Bestandteilen, außer wiedergewonnenen bitumenhaltigen Bindemitteln aus Asphaltmischungen, in einem bestimmten Lösemittel. Toluol wird als Lösemittel für Schiedsprüfungen verwendet. ANMERKUNG: Bitumenhaltige Bindemittel besitzen unterschiedliche Löslichkeiten in verschiedenen Lösemitteln.

Bitumes et liants bitumineux - Détermination de la solubilité

Cette norme européenne prescrit une méthode de détermination du degré de solubilité dans un solvant spécifique, de liants bitumineux, ayant peu ou pas de matiere minérale, autres que ceux récupérés a partir d'enrobés bitumineux. Le toluene est utilisé comme solvant pour les essais en cas d'arbitrage. NOTE: Les liants bitumineux ont des solubilités différentes dans des solvants différents. AVERTISSEMENT: L'utilisation de la présente norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements a caractere dangereux.

Bitumen in bitumenska veziva - Določevanje topnosti

General Information

Status
Withdrawn
Publication Date
30-Jun-2000
Withdrawal Date
03-Jul-2007
ICS
75.140 - Waxes, bituminous materials and other petroleum products
91.100.50 - Binders. Sealing materials
Technical Committee
VLA - Water proofing
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
04-Jul-2007
Due Date
27-Jul-2007
Completion Date
04-Jul-2007
Ref Project
EN 12592:1999 - Bitumen and bituminous binders - Determination of solubility

Relations

Replaced By
SIST EN 12592:2007 - Bitumen and bituminous binders - Determination of solubility
Effective Date
01-Jul-2007

Buy Standard

EN 12592:2000EN 12592:2000
PreviousNext
Standard
EN 12592:2000
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12592:2000
01-julij-2000
%LWXPHQLQELWXPHQVNDYH]LYD'RORþHYDQMHWRSQRVWL
Bitumen and bituminous binders - Determination of solubility
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Löslichkeit
Bitumes et liants bitumineux - Détermination de la solubilité
Ta slovenski standard je istoveten z: EN 12592:1999
ICS:
75
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12846-2:2023(Main)
Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
EN 12846-2:2022

This document specifies a method for the determination of the efflux time at 25 °C of petroleum cut-back and fluxed bituminous binders in seconds using an efflux viscometer. Alternative test temperatures are 40 °C, 50 °C and 60 °C.
WARNING - The use of this document involves hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12846-1:2023(Main)
Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions
EN 12846-1:2022

This document specifies a method for the determination of the efflux time at 40 °C of bituminous emulsions in seconds using an efflux viscometer. Alternative test temperature is 50 °C.
NOTE   The procedure described in this document can also be followed to determine efflux time at other temperatures such as 25 °C.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12847:2022(Main)
Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions
EN 12847:2022

This document specifies a method for the determination of the settling tendency of bituminous emulsions.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12850:2022(Main)
Bitumen and bituminous binders - Determination of the pH value of bituminous emulsions
EN 12850:2022

This document specifies a method for measuring the pH value of bituminous emulsions.
It is applicable to anionic, cationic bituminous emulsions and bituminous emulsions prepared by means of non-ionic surfactant.
In certain circumstances, the pH value can provide an indication of the ionic character of a bituminous emulsion. However, this indication should be confirmed by a particle polarity test conforming to EN 1430 [1].
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17643:2022(Main)
Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test
EN 17643:2022

This document specifies the Binder Fast Characterization Test (for short: BTSV test, German: Bitumen-Typisierungs-Schnell-Verfahren). The test is conducted using a Dynamic Shear Rheometer (DSR). It is used to quickly characterize bitumen and bituminous binders and to assess the deformation behaviour at high service temperatures.
This document deals with the testing of fresh paving grade bitumen and modified bitumen, as conditioned in a laboratory ageing procedure (e.g. EN 12607 1, EN 14769) and also as recovered from asphalt mixtures. The test procedure in accordance with this document is not applicable for bituminous binders with particles larger than 250 μm (e.g. filler material, granulated rubber).
NOTE   The test procedure has not been applied on bituminous binders recovered from bitumen emulsions yet.
The test determines the temperature and the associated phase angle at which a bituminous binder exhibits a defined complex shear modulus in stress-controlled oscillation mode at constant frequency and with continuous increase of the test temperature.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to ensure that regulatory requirements are fulfilled prior to application of this document.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST 1036:2021
Bitumen and bituminous binders - Cationic bituminous emulsions - Requirements
  • Standard
    8 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13614:2021(Main)
Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test
EN 13614:2021

This document specifies a method for determining the adhesion of a bituminous emulsion coated onto aggregate when immersed in water.
The method considers two different aspects of adhesivity, i.e. immediate adhesivity and water effect on binder adhesion.
The method may be used with a reference aggregate. In that case, it measures the intrinsic adhesion behaviour of a bituminous emulsion. The method may also be used with a specific aggregate as used on a job site.
WARNING -The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17481:2020(Main)
Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method
CEN/TS 17481:2020

This document describes a method for determination of the salt content in bitumen, conventionally expressed in mg of sodium chloride (noted NaCl as from this point of this document) per kg of bitumen. This method is valid for "equivalent NaCl contents" between 20 mg/kg and 500 mg/kg.
WARNING - The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17499:2020(Main)
Bitumen and bituminous binders - Examples for CE Marking and Declaration of Performances (DoP)
CEN/TR 17499:2020

This document provides examples of Declaration of Performance (DoP) and CE Marking for bitumen and bituminous binders for use in the construction and maintenance of roads, airfields and other paved areas.
NOTE 1   Only harmonised technical specifications (product standards or ETAs) cited in the OJEU are the basis for drawing up the Declaration of Performance.
NOTE 2   The product standards this document is related to, are listed in the bibliography.
NOTE 3   The EC database of all harmonized standards is available at
https://ec.europa.eu/growth/tools-databases/nando/index.cfm?fuseaction=cp.hs&cpr=Y.

  • Technical report
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17482:2020(Main)
Bitumen and bituminous binders - Determination of acid number of bitumen - Potentiometric method
CEN/TS 17482:2020

This document describes a method for the determination of the free acidic constituents present in bitumen, conventionally known as acid number.
WARNING - The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day