SIST EN 12592:2007
(Main)Bitumen and bituminous binders - Determination of solubility
Bitumen and bituminous binders - Determination of solubility
This European Standard specifies a method for determining the degree of solubility of bituminous binders having little or no mineral matter other than recovered bituminous binders from asphalt mixes, in a specific solvent. Toluene is used as the solvent for reference tests.
NOTE Bituminous binders will have varying solubility in different solvents.
WARNING — Use of this European standard can involve hazardous materials, operations and equipment. This European standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Löslichkeit
Bitumes et liants bitumineux - Détermination de la solubilité
La présente Norme européenne prescrit une méthode de détermination du degré de solubilité dans un solvant spécifique, de liants bitumineux, ayant peu ou pas de matiere minérale, autres que ceux récupérés a partir d'enrobés bitumineux. Le toluene est utilisé comme solvant pour les essais en cas d'arbitrage.
NOTE 1 Les liants bitumineux ont des solubilités différentes dans des solvants différents.
NOTE 2 Pour les besoins de la présente norme européenne, le terme "% (m/m)" est utilisé pour représenter la fraction massique.
AVERTISSEMENT - L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements a caractere dangereux. La présente Norme européenne n'est pas censée aborder tous les problemes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des regles de sécurité et d'hygiene appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določanje topnosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen and bituminous binders - Determination of solubilityBitumes et liants bitumineux - Détermination de la solubilitéBitumen und bitumenhaltige Bindemittel - Bestimmung der LöslichkeitTa slovenski standard je istoveten z:EN 12592:2007SIST EN 12592:2007en91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:SIST EN 12592:20001DGRPHãþDSLOVENSKI
STANDARDSIST EN 12592:200701-julij-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12592March 2007ICS 91.100.50; 75.140Supersedes EN 12592:1999
English VersionBitumen and bituminous binders - Determination of solubilityBitumes et liants bitumineux - Détermination de la solubilitéBitumen und bitumenhaltige Bindemittel - Bestimmung derLöslichkeitThis European Standard was approved by CEN on 3 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12592:2007: E
EN 12592:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Reagents and materials.4 6 Apparatus.5 7 Sampling.5 8 Procedure.5 9 Calculation.6 10 Expression of results.7 11 Precision.7 12 Test report.7 Bibliography.9
EN 12592:2007 (E) 3 Foreword This document (EN 12592:2007) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. This document supersedes EN 12592:1999. This European standard is based on ASTM D 2042-01. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 12592:2007 (E) 4 1 Scope This European Standard specifies a method for determining the degree of solubility of bituminous binders having little or no mineral matter other than recovered bituminous binders from asphalt mixes, in a specific solvent. Toluene is used as the solvent for reference tests. NOTE Bituminous binders will have varying solubility in different solvents. WARNING — Use of this European standard can involve hazardous materials, operations and equipment. This European standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced European Standards are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced European standard (including any amendments) applies. EN 58, Bitumen and bituminous binders - Sampling bituminous binders EN 1425, Bitumen and bituminous binders - Characterization of perceptible properties EN 12594, Bitumen and bituminous binders - Preparation of test samples ISO 4793, Laboratory sintered (fritted) filters - Porosity grading, classification and designation ISO 5272, Toluene for industrial use - Specifications ISO 5280, Xylene for industrial use – Specification 3 Terms and definitions For the purposes of this document, the following term and definition applies. 3.1 solubility portion of material that is soluble in a specific solvent 4 Principle A sample of bituminous binder is dissolved in a solvent. The solution (with the dissolved sample
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.