iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60898-1:2004

(Main)

Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations -- Part 1: Circuit-breakers for a.c. operation

Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations -- Part 1: Circuit-breakers for a.c. operation

Applies to a.c. air-break circuit-breakers for operation at 50 Hz or 60 Hz, having a rated voltage not exceeding 440 V (between phases), a rated current not exceeding 125 A and a rated short-circuit capacity not exceeding 25 000 A.

Elektrisches Installationsmaterial - Leitungsschutzschalter für Hausinstallationen und ähnliche Zwecke -- Teil 1: Leitungsschutzschalter für Wechselstrom (AC)

Petit appareillage électrique - Disjoncteurs pour la protection contre les surintensités pour installations domestiques et analogues -- Partie 1: Disjoncteurs pour le fonctionnement en courant alternatif

La présente partie de la EN 60898 s'applique aux disjoncteurs à coupure dans l'air pour courant alternatif à 50 Hz ou 60 Hz, de tension assignée ne dépassant pas 440 V (entre phases), de courant assigné ne dépassant pas 125 A et d'un pouvoir de coupure assigné ne dépassant pas 25 000 A.

Električni pribor - Odklopniki za nadtokovno zaščito za gospodinjske in podobne instalacije - 1. del: Odklopniki za izmenične tokove (IEC 60898-1:2002 spremenjen)

Velja za zračne odklopnike za izmenični tok, ki delujejo pri 50 Hz ali 60 Hz, pri čemer njihova nazivna napetost ne presega 440 V (med fazami), nazivni tok ne presega 125 A, nazivna kratkostična zmogljivost pa ne presega 25.000 A.

General Information

Status
Withdrawn
Publication Date
31-Dec-2003
Withdrawal Date
10-Dec-2023
ICS
29.120.50 - Fuses and other overcurrent protection devices
Technical Committee
EPR - Electrical accessories
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Dec-2023
Due Date
03-Jan-2024
Completion Date
11-Dec-2023
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
EN 60898-1:2003 - Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation

Relations

Replaces
SIST EN 60898:1995/A17:1999 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
28-Jan-2023
Replaces
SIST EN 60898:1995/A16:1997 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
28-Jan-2023
Replaces
SIST EN 60898:1995/A14:1997 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
28-Jan-2023
Replaces
SIST EN 60898:1995/A19:2001 - Withdrawal of SE A-deviation regarding clause 1 of EN
Effective Date
28-Jan-2023
Replaces
SIST EN 60898:1995/A13:1997 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
28-Jan-2023
Replaces
SIST EN 60898:1995/A15:1999 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
28-Jan-2023
Replaces
SIST EN 60898:1995/A18:1999 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
28-Jan-2023
Replaces
SIST EN 60898:1995 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
28-Jan-2023
Replaces
SIST EN 60898:1995/A12:1997 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
28-Jan-2023
Replaces
SIST EN 60898:1995/A16:1997 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
07-Jun-2022
Replaces
SIST EN 60898:1995/A12:1997 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
07-Jun-2022
Replaces
SIST EN 60898:1995/A19:2001 - Withdrawal of SE A-deviation regarding clause 1 of EN
Effective Date
07-Jun-2022
Replaces
SIST EN 60898:1995/A14:1997 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
07-Jun-2022
Replaces
SIST EN 60898:1995/A12:1997 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
06-May-2014
Replaces
SIST EN 60898:1995/A18:1999 - Circuit-breakers for overcurrent protection for household and similar installations
Effective Date
06-May-2014

Buy Standard

EN 60898-1:2004EN 60898-1:2004
PreviousNext
Standard
EN 60898-1:2004
English language
131 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61543:2023(Main)
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility (IEC 61543:2022)
EN IEC 61543:2023

This document provides specific emission and immunity requirements, tests and performance criteria for residual current-operated protective devices (RCDs), for household and similar use, for rated voltages not exceeding 440 V.
Household and similar use corresponds to the description given in the generic standard IEC 61000-6-1 for residential, commercial, and light-industrial electromagnetic environments.
This document is intended to be referred to by RCD product standards and is not intended to be used as a standalone document.
Residual current-operated protective devices are:
- Residual current operated circuit-breakers without integral overcurrent protection for household and similar use (RCCBs) covered by IEC 61008 series and IEC 62423;
- Residual current operated circuit-breakers with integral overcurrent protection for household and similar use (RCBOs) covered by IEC 61009 series and IEC 62423;
- Residual current devices with or without overcurrent protection for socket-outlets (SRCDs) covered by IEC 62640;
- Portable residual current devices without integral overcurrent protection (PRCDs) covered by IEC 61540;
- Devices with an RCD functionality for household and similar use according product standards following the group safety publications for general safety requirements for RCDs, IEC 60755.
This edition applies if it is referred to as a dated reference in the relevant product standard.
This document is also intended to be used as a guideline in the preparation of EMC requirements and tests for other product standards under the scope of SC 23E. It also specifies generic performance criteria intended to be transformed into specific performance criteria by the relevant product standard.
Note: Examples of other product standards under the scope of SC 23E are:
- IEC 62020-1 "Electrical accessories - Residual current monitors (RCMs) – Part 1: RCMs for household and similar uses";
- IEC 62606 "General requirements for arc fault detection devices";
- IEC 63024 "Requirements for automatic reclosing devices (ARDs) for circuit breakers, RCBOs-RCCBs for household and similar uses";
- IEC 63052 "Power frequency overvoltage protective devices (POPs) for household and similar applications";
- IEC 62752 "In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)";
- IEC 62955 "Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles".

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61543:2023/A11:2023(Amendment)
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
EN IEC 61543:2023/A11:2023
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62423:2013/A12:2023(Amendment)
Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
EN 62423:2012/A12:2022

The scope of EN 61008-1 and EN 61008-2-1 or EN 61009-1 and EN 61009-2-1 applies with the following additions.
This standard specifies requirements and tests for Type F and Type B RCDs (Residual current devices). Requirements and tests given in this standard are in addition to the requirements of Type A residual current devices according to EN 61008-2-1 or EN 61009-2-1. This standard can only be used together with EN 61008-1 and EN 61009-1.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61009-1:2013/A13:2022(Amendment)
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Annex N - Additional requirements and tests for RCBOs consisting of one residual current protection function and several independent two-pole overcurrent protection functions
EN 61009-1:2012/A13:2021

This annex applies to RCBOs with one residual current protection function and several independent two-pole overcurrent protection functions.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62423:2013/AC:2021(Corrigendum)
Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (IEC 62423:2009/COR2:2021)
EN 62423:2012/AC:2021-09

2021-09-07 - IEC Corrected version

  • Corrigendum
    3 pages
    French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63052:2021(Main)
Power frequency overvoltage protective devices (POPs) for household and similar applications (IEC 63052:2019 + COR1:2019)
EN IEC 63052:2021

This document applies to devices for power frequency overvoltage protection (hereafter referred to as "POP") for household and similar uses, with a rated frequency of 50 Hz, 60 Hz or 50/60 Hz, with rated voltage not exceeding 230 V AC (between phase and neutral), and with rated current not exceeding 63 A, either consisting of a functional unit in combination with a main protective device (MPD), or as one single device having opening means able to open the protected circuit in specified conditions. The main protective device is a circuit-breaker, an RCCB or an RCBO. NOTE 1 A POP, as one single device, is not a protective device to be used for automatic disconnection of the supply within the meaning specified in IEC 60364-4-41. POPs are intended for use in an environment with pollution degree 2 and overvoltage category III. Devices for POPs are suitable for isolation. POPs can be designed as a POP unit assembled to or integrated in a main protective device by the manufacturer or as an assembly of a main protective device mechanically or electrically coupled on site with the POP unit, or as one single POP having opening means able to open the protected circuit in specified conditions. POPs are intended to mitigate the effects of power frequency overvoltages between a phase and neutral conductor (e.g. caused by loss of a neutral conductor in the three-phase supply upstream of the POP) for downstream equipment by opening the protected circuit when an overvoltage between phase and neutral is detected. NOTE 2 In this context, the verb "mitigate" means that the POP will provide protection in most cases of power frequency overvoltages. POPs intended for monitoring one line-to-neutral conductor voltage can be used between two-phase conductors in a phase-to-phase electrical supply system not exceeding 230 V if both conductors are switched and declared as such by the manufacturer. POPs according to this document are suitable for use in an IT system provided all active conductors are switched. This document does not apply to protection against common mode overvoltages. This document does not apply to surge protective devices.

  • Standard
    124 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60898-2:2021(Main)
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation (IEC 60898-2:2016, modified)
EN 60898-2:2021

This standard gives additional requirements for single- and two-pole circuit-breakers which, in
addition to the above characteristics, are suitable for operation with direct current, and have a
rated DC voltage not exceeding 220 V for single-pole and 440 V for two-pole circuit-breakers,
a rated current not exceeding 125 A and a rated DC short-circuit capacity not exceeding
10 000 A.
NOTE This standard applies to circuit-breakers able to make and break both alternating current and direct
current.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62423:2013/A11:2021(Amendment)
Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
EN 62423:2012/A11:2021
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 62640:2015/A12:2021(Amendment)
Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses
HD 62640:2015/A12:2021

2021-04-27: This A12 has added IE, UK & AT SNCs on HD 62640:2015
D168/C061= approval of SNCs

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62020-1:2021(Main)
Electrical accessories - Residual current monitors (RCMs) - Part 1: RCMs for household and similar uses (IEC 62020-1:2020 + COR1:2020)
EN IEC 62020-1:2021

This document applies to residual current monitors for household and similar purposes,
having rated operational voltages and a rated voltage of the monitored circuit not exceeding
440 V AC and rated currents not exceeding 125 A.
NOTE 1 The standard for residual current monitors having rated operational voltages and a rated voltage of the
monitored circuit exceeding 440 V AC is in preparation, as IEC 62020-2.
RCMs are intended to monitor the residual current of the installation and to give a warning if
the residual current between a live part and an exposed conductive part or earth exceeds a
predetermined level.
RCMs covered by this document are not intended to be used as protective devices.
RCMs detect residual currents circulating in an AC circuit (e.g. residual alternating current,
residual pulsating direct current, residual smooth direct current), whether suddenly applied or
slowly rising.
NOTE 2 RCMs for DC systems are under consideration.
This document applies to monitors performing simultaneously the functions of detection of the
residual current, of comparison of the value of this current with the residual operating current
of the device and providing the specified warning signal(s) when the residual current exceeds
this value.
RCMs supplied by internal batteries are not covered by this document.
The requirements of this document apply for standard conditions (see 7.1). Additional
requirements can be necessary for RCMs used in locations having severe environmental
conditions.
RCMs are intended for use in an environment with pollution degree 2 and overvoltage
category III. For an environment with a higher pollution degree, enclosures giving the
appropriate degree of protection are used.
RCMs in compliance with this document are suitable for use in TN, TT, and IT systems.
This document does not cover Insulation Monitoring Devices (IMDs), which are covered by the
scope of IEC 61557-8.
NOTE 3 An RCM is distinguished from an IMD in that it is passive in its monitoring function and only responds to
an unbalanced fault current in the installation being monitored. An IMD is active in its monitoring and measuring
functions in that it can measure the balanced and unbalanced insulation resistance or impedance in the installation
(see IEC 61557-8).

  • Standard
    119 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    107 pages
    English language
    sale 10% off
    e-Library read for
    1 day