Safety of toys - Part 7: Finger paints - Requirements and test methods

2019-12-09: HAS assessment missing at ENQ. Request submitted to HAS Livelink platform with deadline: 2020-01-29.

Sicherheit von Spielzeug - Teil 7: Fingermalfarben - Anforderungen und Prüfverfahren

Sécurité des jouets - Partie 7: Peintures au doigt - Exigences et méthodes d'essai

Varnost igrač - 7. del: Prstne barve - Zahteve in preskusne metode - Dopolnilo A3

General Information

Status
Not Published
Public Enquiry End Date
03-Nov-2019
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
11-Nov-2020
Due Date
16-Nov-2020
Completion Date
11-Nov-2020

Relations

Buy Standard

Draft
EN 71-7:2014+A2:2018/oprA3:2019
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 71-7:2014+A2:2018/oprA3:2019
01-oktober-2019
Varnost igrač - 7. del: Prstne barve - Zahteve in preskusne metode - Dopolnilo A3
Safety of toys - Part 7: Finger paints - Requirements and test methods
Sicherheit von Spielzeug - Teil 7: Fingermalfarben - Anforderungen und Prüfverfahren
Sécurité des jouets - Partie 7: Peintures au doigt - Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 71-7:2014+A2:2018/prA3
ICS:
97.200.50 Igrače Toys
SIST EN 71-7:2014+A2:2018/oprA3:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 71-7:2014+A2:2018/oprA3:2019

---------------------- Page: 2 ----------------------
SIST EN 71-7:2014+A2:2018/oprA3:2019


DRAFT
EUROPEAN STANDARD
EN 71-7:2014+A2:2018
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA3
September 2019
ICS 97.200.50
English Version

Safety of toys - Part 7: Finger paints - Requirements and
test methods
Sécurité des jouets - Partie 7: Peintures au doigt - Sicherheit von Spielzeug - Teil 7: Fingermalfarben -
Exigences et méthodes d'essai Anforderungen und Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 52.

This draft amendment A3, if approved, will modify the European Standard EN 71-7:2014+A2:2018. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 71-7:2014+A2:2018/prA3:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 71-7:2014+A2:2018/oprA3:2019
EN 71-7:2014/prA3:2019 (E)
Contents Page
European foreword . 3
1 Modification to the whole document . 4
2 Modifications to 4.5 "Limits for impurities" . 4
3 Modifications to 4.6 "Taste and smell" .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.