Fixed capacitors for use in electronic equipment - Part 1-1 : Generic blank detail specification (IEC 60384-1-1:2022)

IEC 60384-1-1:2022 establishes a generic template and specifies requirements to the content of detail specifications for capacitors within the IEC 60384-X series. This part of IEC 60384-1 is applicable to the drafting of detail specifications for fixed capacitors for use in electronic equipment.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 1-1: Allgemeiner Vordruck für Bauartspezifikation (IEC 60384-1-1:2022)

Condensateurs fixes utilisés dans les équipements électroniques - Partie 1-1: Spécification particulière-cadre générique (IEC 60384-1-1:2022)

L’IEC 60384-1-1:2022 établit un modèle générique et spécifie les exigences relatives au contenu des spécifications particulières pour les condensateurs relevant de la série IEC 60384-X. La présente partie de l’IEC 60384-1 s’applique à l’élaboration des spécifications particulières relatives aux condensateurs fixes utilisés dans les équipements électroniques.

Nespremenljivi kondenzatorji za elektronsko opremo - 1-1. del: Splošna okvirna podrobna specifikacija (IEC 60384-1-1:2022)

General Information

Status
Published
Public Enquiry End Date
10-Feb-2022
Publication Date
19-Sep-2022
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Sep-2022
Due Date
21-Nov-2022
Completion Date
20-Sep-2022

Buy Standard

Standard
SIST EN IEC 60384-1-1:2022 - BARVE na PDF-str 16,17,18,19,20,22,23,26
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
oSIST prEN IEC 60384-1-1:2022
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 60384-1-1:2022
01-november-2022
Nespremenljivi kondenzatorji za elektronsko opremo - 1-1. del: Splošna okvirna
podrobna specifikacija (IEC 60384-1-1:2022)

Fixed capacitors for use in electronic equipment - Part 1-1 : Generic blank detail

specification (IEC 60384-1-1:2022)

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 1-1: Allgemeiner

Vordruck für Bauartspezifikation (IEC 60384-1-1:2022)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 1-1:
Spécification particulière-cadre générique (IEC 60384-1-1:2022)
Ta slovenski standard je istoveten z: EN IEC 60384-1-1:2022
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
SIST EN IEC 60384-1-1:2022 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60384-1-1:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 60384-1-1:2022
EUROPEAN STANDARD EN IEC 60384-1-1
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2022
ICS 31.060.10
English Version
Fixed capacitors for use in electronic equipment - Part 1-1:
Generic blank detail specification
(IEC 60384-1-1:2022)

Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der

électroniques - Partie 1-1: Spécification particulière-cadre Elektronik - Teil 1-1: Allgemeiner Vordruck für

générique Bauartspezifikation
(IEC 60384-1-1:2022) (IEC 60384-1-1:2022)

This European Standard was approved by CENELEC on 2022-08-24. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 60384-1-1:2022 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60384-1-1:2022
EN IEC 60384-1-1:2022 (E)
European foreword

The text of document 40/2951/FDIS, future edition 1 of IEC 60384-1-1, prepared by IEC/TC 40

"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote

and approved by CENELEC as EN IEC 60384-1-1:2022.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2023-05-24

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2025-08-24

document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Any feedback and questions on this document should be directed to the users’ national committee. A

complete listing of these bodies can be found on the CENELEC website.
Endorsement notice

The text of the International Standard IEC 60384-1-1:2022 was approved by CENELEC as a

European Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards

indicated:
IEC 60027 series NOTE Harmonized as EN 60027 series
IEC 60286 series NOTE Harmonized as EN 60286 series
IEC 61760-1 NOTE Harmonized as EN IEC 61760-1
ISO 80000 series NOTE Harmonized as EN ISO 80000 series
ISO 80000-1 NOTE Harmonized as EN ISO 80000-1
---------------------- Page: 4 ----------------------
SIST EN IEC 60384-1-1:2022
EN IEC 60384-1-1:2022 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),

the relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available

here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60062 - Marking codes for resistors and capacitors EN 60062 -
IEC 60384-1 2021 Fixed capacitors for use in electronic EN IEC 60384-1 2021
equipment - Part 1: Generic specification
IEC 60384-X XXXX [Related sectional specification] EN 60384-X XXXX
IEC 61193-2 - Quality assessment systems - Part 2: EN 61193-2 -
Selection and use of sampling plans for
inspection of electronic components and
packages
IEC 61760-2 - Surface mounting technology - Part 2: EN IEC 61760-2 -
Transportation and storage conditions of
surface mounting devices (SMD) - Application
guide
IEC 62090 - Product package labels for electronic EN 62090 -
components using bar code and two
dimensional symbologies
---------------------- Page: 5 ----------------------
SIST EN IEC 60384-1-1:2022
---------------------- Page: 6 ----------------------
SIST EN IEC 60384-1-1:2022
IEC 60384-1-1
Edition 1.0 2022-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Fixed capacitors for use in electronic equipment –
Part 1-1: Generic blank detail specification
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 1-1: Spécification particulière-cadre générique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.10 ISBN 978-2-8322-4031-1

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 60384-1-1:2022
– 2 – IEC 60384-1-1:2022 © IEC 2022
CONTENTS

FOREWORD ........................................................................................................................... 4

INTRODUCTION ..................................................................................................................... 6

1 Scope .............................................................................................................................. 9

2 Normative references ...................................................................................................... 9

3 Terms and definitions ...................................................................................................... 9

4 Ratings and characteristics ............................................................................................ 10

4.1 General ................................................................................................................. 10

4.2 Dimensions ........................................................................................................... 10

4.3 Climatic category and ratings ................................................................................ 11

4.4 Capacitance range, tolerances and rated voltage .................................................. 11

5 Tests, test severities and performance requirements ..................................................... 12

5.1 General ................................................................................................................. 12

5.2 Visual inspection and check of dimensions ........................................................... 12

5.3 Electrical tests and measurements ........................................................................ 12

5.4 Robustness of terminations ................................................................................... 12

5.5 Tests related to component assembly ................................................................... 12

5.6 Rapid change of temperature ................................................................................ 12

5.7 Vibration ............................................................................................................... 12

5.8 Shock ................................................................................................................... 12

5.9 Climatic sequence................................................................................................. 12

5.10 Damp heat, steady state ....................................................................................... 12

5.11 Endurance ............................................................................................................ 13

5.12 Further tests related to specific component technology (if applicable) ................... 13

5.13 Tests related to safety (if applicable) .................................................................... 13

6 Marking, packaging and ordering information ................................................................. 13

6.1 Marking ................................................................................................................. 13

6.1.1 Marking of the component.............................................................................. 13

6.1.2 Marking of the packaging ............................................................................... 13

6.2 Packaging ............................................................................................................. 13

6.3 Ordering information ............................................................................................. 13

7 Additional information .................................................................................................... 13

7.1 General ................................................................................................................. 13

7.2 Storage and transportation .................................................................................... 13

7.3 Substrate for assembly ......................................................................................... 14

7.4 Soldering process ................................................................................................. 14

7.5 Use of cleaning agents or solvents ........................................................................ 14

7.6 Coating or potting after assembly .......................................................................... 14

8 Quality assessment procedures ..................................................................................... 14

8.1 General ................................................................................................................. 14

8.1.1 100 % test ..................................................................................................... 14

8.1.2 Certificate of conformity (CoC) ....................................................................... 15

8.1.3 Certified test records of released lots ............................................................ 15

8.2 Qualification approval ........................................................................................... 15

8.3 Maintenance of a qualification approval ................................................................ 15

8.3.1 Quality conformance inspection ..................................................................... 15

8.3.2 Non-conforming item ..................................................................................... 15

---------------------- Page: 8 ----------------------
SIST EN IEC 60384-1-1:2022
IEC 60384-1-1:2022 © IEC 2022 – 3 –

Annex A (normative) Symbols and abbreviated terms .......................................................... 19

A.1 Symbols ................................................................................................................ 19

A.2 Abbreviated terms ................................................................................................. 19

Annex B (normative) Reference for visual inspection ........................................................... 20

Bibliography .......................................................................................................................... 21

Figure 1 – Outline and dimensions ........................................................................................ 10

Table 1 – Case size and dimensions ..................................................................................... 10

Table 2 – Climatic categories ................................................................................................ 11

Table 3 – Ratings.................................................................................................................. 11

Table 4 – Temperature coefficients, tolerances and capacitance ranges for climatic

category … / … / … .............................................................................................................. 11

Table 5 – Test schedule for a qualification approval .............................................................. 16

Table 6 – Test schedule for quality conformance inspection .................................................. 17

---------------------- Page: 9 ----------------------
SIST EN IEC 60384-1-1:2022
– 4 – IEC 60384-1-1:2022 © IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 1-1: Generic blank detail specification
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their

preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

may participate in this preparatory work. International, governmental and non-governmental organizations liaising

with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence between

any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent

rights. IEC shall not be held responsible for identifying any or all such patent rights.

IEC 60384-1-1 has been prepared by technical committee 40: Capacitors and resistors for

electronic equipment. It is an International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
40/2951/FDIS 40/2964/RVD

Full information on the voting for its approval can be found in the report on voting indicated in

the above table.
The language used for the development of this International Standard is English.

This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in

accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available

at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are

described in greater detail at www.iec.ch/standardsdev/publications.
---------------------- Page: 10 ----------------------
SIST EN IEC 60384-1-1:2022
IEC 60384-1-1:2022 © IEC 2022 – 5 –

A list of all parts in the IEC 60384 series, published under the general title Fixed capacitors for

use in electronic equipment, can be found on the IEC website.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under webstore.iec.ch in the data related to the

specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The "colour inside" logo on the cover page of this document indicates that it

contains colours which are considered to be useful for the correct understanding of its

contents. Users should therefore print this document using a colour printer.
---------------------- Page: 11 ----------------------
SIST EN IEC 60384-1-1:2022
– 6 – IEC 60384-1-1:2022 © IEC 2022
INTRODUCTION

This introduction is not intended to be copied into the drafted detail specification. Therefore, it

is positioned in front of the conventional document structure and clause numbering range. It

nevertheless contains normative requirements to the drafted detail specification.

Scope of this generic blank detail specification

This part of IEC 60384-1 is applicable to the drafting of detail specifications for fixed capacitors

for use in electronic equipment.
Function of this generic blank detail specification

This generic blank detail specification is a supplementary document to the sectional

specifications and contains requirements for style, layout and minimum contents of detail

specifications. Detail specifications not complying with these requirements shall not be

considered as being in accordance with IEC specifications nor shall they be described as such.

The detail specification should contain a table of contents prior to the first page of the actual

specification.

In the preparation of the detail specification, the relevant content of the related sectional

specification IEC 60384-X shall be taken into account.

Units, graphical symbols and letter symbols should be chosen, wherever possible, from the

various parts of the IEC 60027 series, the ISO 80000 series and ISO/IEC Guide 99.

This blank detail specification uses for its purpose two different kinds of notes:

For notes which give additional information intended to assist the understanding or use of the

resulting document and therefore shall be copied as NOTE into the drafted detail specification.

As outlined in the ISO/IEC directives, these notes shall not contain any requirement, instruction,

recommendation or permission.

For instructions to the specification writer, COMMENTS are used instead of NOTES. For a clear

distinction, these comments are formatted as IEC-
...

SLOVENSKI STANDARD
oSIST prEN IEC 60384-1-1:2022
01-februar-2022
Fiksni kondenzatorji za elektronsko opremo - 1-1. del: Splošna okvirna podrobna
specifikacija

Fixed capacitors for use in electronic equipment - Part 1-1 : Generic blank detail

specification
Ta slovenski standard je istoveten z: prEN IEC 60384-1-1:2021
ICS:
31.060.10 Fiksni kondenzatorji Fixed capacitors
oSIST prEN IEC 60384-1-1:2022 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60384-1-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60384-1-1:2022
40/2888/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60384-1-1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2021-11-19 2022-02-11
SUPERSEDES DOCUMENTS:
40/2840/CD, 40/2873/CC
IEC TC 40 : CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT
SECRETARIAT: SECRETARY:
Netherlands Mr Ronald Drenthen
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING

Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.

Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which

they are aware and to provide supporting documentation.
TITLE:

Fixed capacitors for use in electronic equipment – Part 1-1 : Generic blank detail specification

PROPOSED STABILITY DATE: 2032
NOTE FROM TC/SC OFFICERS:

Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this

electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.

You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without

permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60384-1-1:2022
IEC CDV 60384-1-1 Ed.1  IEC:202X – 2 – 40/2888/CDV
1 CONTENTS

3 FOREWORD ........................................................................................................................... 4

4 INTRODUCTION ..................................................................................................................... 6

5 Scope ..................................................................................................................................... 9

6 Normative references .............................................................................................................. 9

7 Terms and definitions ............................................................................................................. 9

8 Ratings and characteristics ..................................................................................................... 9

9 4.1 General ................................................................................................................... 9

10 4.2 Dimensions ............................................................................................................. 9

11 4.3 Climatic category and ratings ................................................................................ 10

12 4.4 Capacitance range, tolerances and rated voltage .................................................. 11

13 Tests, test severities and performance requirements ............................................................ 11

14 5.1 General ................................................................................................................. 11

15 5.2 Visual inspection and check of dimensions ........................................................... 11

16 5.3 Electrical tests and measurements ........................................................................ 12

17 5.4 Robustness of terminations ................................................................................... 12

18 5.5 Tests related to component assembly ................................................................... 12

19 5.6 Rapid change of temperature ................................................................................ 12

20 5.7 Vibration ............................................................................................................... 12

21 5.8 Shock ................................................................................................................... 12

22 5.9 Climatic sequence ................................................................................................ 12

23 5.10 Damp heat, steady state ....................................................................................... 12

24 5.11 Endurance ............................................................................................................ 12

25 5.12 Further tests related to specific component technology (if applicable) ................... 12

26 5.13 Tests related to safety (if applicable) .................................................................... 12

27 Marking, packaging and ordering information ........................................................................ 12

28 6.1 Marking ................................................................................................................. 12

29 6.1.1 Marking of the component ............................................................................. 12

30 6.1.2 Marking of the packaging ............................................................................... 12

31 6.2 Packaging ............................................................................................................. 12

32 6.3 Ordering information ............................................................................................. 12

33 Additional information ........................................................................................................... 13

34 7.1 General ................................................................................................................. 13

35 7.2 Storage and transportation .................................................................................... 13

36 7.3 Substrate for assembly ......................................................................................... 13

37 7.4 Soldering process ................................................................................................. 13

38 7.5 Use of cleaning agents or solvents........................................................................ 13

39 7.6 Coating or potting after assembly .......................................................................... 13

40 Quality assessment procedures ............................................................................................ 13

41 8.1 General ................................................................................................................. 13

42 8.1.1 100% test ...................................................................................................... 13

43 8.1.2 Certificate of Conformity (CoC) ...................................................................... 14

44 8.1.3 Certified test records of released lots ............................................................ 14

45 8.2 Qualification approval ........................................................................................... 14

46 8.3 Maintenance of a qualification approval ................................................................ 14

47 8.3.1 Quality conformance inspection ..................................................................... 14

---------------------- Page: 4 ----------------------
oSIST prEN IEC 60384-1-1:2022
IEC CDV 60384-1-1 Ed.1  IEC:202X – 3 – 40/2888/CDV

48 8.3.2 Non-conforming item ..................................................................................... 14

49 Annex A (normative) Symbols and abbreviated terms ......................................................... 17

50 A.1 Symbols ................................................................................................................ 17

51 A.2 Abbreviated terms ................................................................................................. 17

52 Annex B (normative) Reference for visual inspection ........................................................... 18

53 Bibliography .......................................................................................................................... 19

55 Figure 1 – Outline and dimensions ........................................................................................ 10

57 Table 1 – Case size and dimensions ..................................................................................... 10

58 Table 2 – Climatic categories ................................................................................................ 10

59 Table 3 – Ratings ................................................................................................................. 11

60 Table 4 – Temperature coefficients, tolerances and capacitance ranges for climatic

61 category … / … / … .............................................................................................................. 11

62 Table 5 – Test schedule for a qualification approval (Template) ............................................ 15

63 Table 6 – Test schedule for quality conformance inspection (Template) ................................ 16

---------------------- Page: 5 ----------------------
oSIST prEN IEC 60384-1-1:2022
IEC CDV 60384-1-1 Ed.1  IEC:202X – 4 – 40/2888/CDV
67 INTERNATIONAL ELECTROTECHNICAL COMMISSION
68 ____________
70 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT–
72 Part 1-1: Generic blank detail specification
75 FOREWORD

76 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

77 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

78 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

79 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

80 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their

81 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

82 may participate in this preparatory work. International, governmental and non-governmental organizations liaising

83 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

84 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

85 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

86 consensus of opinion on the relevant subjects since each technical committee has representation from all

87 interested IEC National Committees.

88 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

89 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

90 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

91 misinterpretation by any end user.

92 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

93 transparently to the maximum extent possible in their national and regional publications. Any divergence between

94 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

95 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

96 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

97 services carried out by independent certification bodies.

98 6) All users should ensure that they have the latest edition of this publication.

99 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

100 members of its technical committees and IEC National Committees for any personal injury, property damage or

101 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

102 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

103 Publications.

104 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

105 indispensable for the correct application of this publication.

106 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent

107 rights. IEC shall not be held responsible for identifying any or all such patent rights.

108 IEC 60384-1-1 has been prepared IEC technical committee 40: Capacitors and resistors for

109 electronic equipment. It is an International Standard.
110 The text of this International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
111

112 Full information on the voting for its approval can be found in the report on voting indicated in

113 the above table.

114 The language used for the development of this International Standard is English.

115 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in

116 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available

117 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are

118 described in greater detail at www.iec.ch/standardsdev/publications.
---------------------- Page: 6 ----------------------
oSIST prEN IEC 60384-1-1:2022
IEC CDV 60384-1-1 Ed.1  IEC:202X – 5 – 40/2888/CDV

119 The committee has decided that the contents of this document will remain unchanged until the

120 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

121 the specific document. At this date, the document will be
122 • reconfirmed,
123 • withdrawn,
124 • replaced by a revised edition, or
125 • amended.
---------------------- Page: 7 ----------------------
oSIST prEN IEC 60384-1-1:2022
IEC CDV 60384-1-1 Ed.1  IEC:202X – 6 – 40/2888/CDV
126 INTRODUCTION

127 This introduction is not intended to be copied into the drafted detail specification. Therefore, it

128 is positioned in front of the conventional document structure and clause numbering range. It

129 nevertheless contains normative requirements to the drafted detail specification.

130 Scope of this generic blank detail specification

131 This part of IEC 60384-1 is applicable to the drafting of detail specifications for fixed capacitors

132 for use in electronic equipment.
133 Function of this generic blank detail specification

134 This generic blank detail specification is a supplementary document to the sectional

135 specifications and contains requirements for style, layout and minimum contents of detail

136 specifications. Detail specifications not complying with these requirements shall not be

137 considered as being in accordance with IEC specifications nor shall they be described as such.

138 The detail specification should contain a table of contents prior to the first page of the actual

139 specification.

140 In the preparation of the detail specification, the relevant content of the related sectional

141 specification IEC 60384-X shall be taken into account.

142 Units, graphical symbols and letter symbols should be chosen, wherever possible, from the

143 various parts of the IEC 60027 series, the ISO 80000 series and ISO/IEC Guide 99.:

144 This blank detail specification uses for its purpose two different kinds of notes:

145 – NOTE For notes which give additional information intended to assist the understanding or use

146 of the resulting document and therefore shall be copied as NOTE into the drafted detail

147 specification. As outlined in the ISO/IEC directives, these notes shall not contain any

148 requirement, instruction, recommendation or permission.

149 – COMMENT For editorial notes which are intended to aid and direct the specification writer

150 and therefore shall not be copied into the drafted detail specification. In order to accomplish

151 their function, editorial notes require the use of instructions, recommendations and permissions

152 addressed to the writer of the detail specification.
153 Identification of the detail specification and the capacitor

154 The first page of the detail specification should have a layout starting with a title block as

155 recommended on the following page.

156 The numbers in square brackets are editorial references, which are not intended to be copied

157 into the drafted detail specification, and which correspond to the following information on the

158 contents which shall be inserted in the indicated positions.

159 [1] "International Electrotechnical Commission" or the name of the standardization organization

160 under whose authority the detail specification is published and, if applicable, the organization

161 from whom the detail specification is available.

162 [2] The number allocated to the detail specification by the IEC or by the responsible

163 standardisation organisation, together with the date of issue and issue number, as applicable.

164 Further reference details required by the responsible standardisation organisation or quality

165 assessment system may be given here, including an established mark of conformity, as

166 applicable.

167 [3] The number and issue date and number, as applicable, of the relevant generic specification,

168 sectional specification and blank detail specification, where the referenced issues shall be the

169 most recent issues of the respective specifications.

170 [4] The title of the detail specification, providing a short description of the type of capacitors.

171 This entry should support the discrimination between similar specifications and should be

---------------------- Page: 8 ----------------------
oSIST prEN IEC 60384-1-1:2022
IEC CDV 60384-1-1 Ed.1  IEC:202X – 7 – 40/2888/CDV

172 suitable for an entry in a register of approvals or in a catalogue of standards. It may duplicate

173 information given in the textual scope in Clause 1.

174 [5] An outline drawing or illustration of the products. This entry should aid the easy recognition

175 of the capacitors and, if possible, support the discrimination between similar specifications. It

176 may duplicate information given in Figure 1.

177 [6] Information on the typical construction of the capacitors (where applicable). This entry may

178 duplicate information given in the textual scope in Clause 1.

179 [7] The classification level of the capacitors covered by this detail specificati

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.