Product package labels for electronic components using bar code and two- dimensional symbologies

This document applies to labels on the packaging of electronic components for automatic
handling in B2B processes. These labels use linear bar code and two-dimensional (2D)
symbols. Labels for direct product marking and shipping labels are excluded. Labels required
on the packaging of electronic components that are intended for the retail channel of
distribution in B2C processes are also excluded from this document.
Bar code and 2D symbol markings are used, in general, for automatic identification and
automatic handling of components in electronics assembly lines. Intended applications include
systems that automate the control of component packages during production, inventory and
distribution.

Etiketten für Verpackungen elektronischer Bauelemente unter Anwendung von Strichcodierung und zweidimensionaler Symbologien

Etiquettes d'emballage de produits pour composants électroniques, utilisant un code à barres et une symbologie bidimensionelle

L'IEC 62090:2017 s’applique aux étiquettes apposées sur l’emballage des composants électroniques pour opérations automatisées dans les processus B2B. Ces étiquettes utilisent un code à barres linéaire et des symboles bidimensionnels (2D). Les étiquettes pour le marquage de produit direct et les étiquettes de transport sont exclues. Les étiquettes exigées sur l’emballage des composants électroniques qui sont destinés au circuit de distribution de détail dans les processus B2C sont aussi exclues du présent document. En général, le code à barres et les marquages de symboles 2D sont utilisés pour l’identification et la manipulation automatiques de composants dans les chaînes de montage en électronique. Les applications prévues comprennent des systèmes qui automatisent le contrôle des emballages de composants pendant la production, l’inventaire et la distribution. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente: a) Ajout d’éléments de données applicables: Les identificateurs de données des éléments de données sont “ 10D ”, “ 14D ”, “ 2P ”, “ 25L ”, “ 18V ”, “ V ”, “ J ”, “ 3S ”, “ 13E ”, “ 33L ” et “ 34L ”. b) Ajout des nouvelles annexes informatives suivantes: - Annexe C, URL; - Annexe D, Exemples de titres abrégés pour des éléments de données; - Annexe E, Niveaux d’emballage pour les étiquettes d’emballage de composants.

Označbe za pakiranje elektronskih komponent s črtnimi kodami in dvodimenzionalnimi simboli

Ta dokument se uporablja za oznake na embalaži elektronskih komponent za samodejno upravljanje pri procesih B2B. Na teh oznakah so uporabljene linearne črtne kode in dvodimenzonalni (2D) simboli. Oznake za neposredno označevanje izdelkov in oznake za dobavo so izključene. Oznake, ki so zahtevane na embalaži elektronskih komponent, ki so namenjene prodajnemu kanalu distribucije pri procesih B2C, ravno tako niso zajete v tem dokumentu.
Splošno gledano se uporabljajo črtna koda in simbolne oznake 2D za samodejno prepoznavanje in upravljanje komponent na tekočih trakovih za elektroniko. Med namensko uporabo spadajo sistemi, ki omogočajo avtomatizacijo kontrole paketov komponent med proizvodnjo, ustvarjanjem inventarja in distribucijo.

General Information

Status
Published
Publication Date
15-Feb-2018
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Feb-2018
Due Date
19-Apr-2018
Completion Date
16-Feb-2018

RELATIONS

Buy Standard

Standard
SIST EN 62090:2018 - BARVE na PDF-str 23,24,32,34,35
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 62090:2018
01-marec-2018
1DGRPHãþD
SIST EN 62090:2003
2]QDþEH]DSDNLUDQMHHOHNWURQVNLKNRPSRQHQWVþUWQLPLNRGDPLLQ
GYRGLPHQ]LRQDOQLPLVLPEROL

Product package labels for electronic components using bar code and two- dimensional

symbologies
Etiketten für Verpackungen elektronischer Bauelemente unter Anwendung von
Strichcodierung und zweidimensionaler Symbologien

Etiquettes d'emballage de produits pour composants électroniques, utilisant un code à

barres et une symbologie bidimensionelle
Ta slovenski standard je istoveten z: EN 62090:2017
ICS:
31.190 Sestavljeni elektronski Electronic component
elementi assemblies
35.040.50 Tehnike za samodejno Automatic identification and
razpoznavanje in zajem data capture techniques
podatkov
SIST EN 62090:2018 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 62090:2018
---------------------- Page: 2 ----------------------
SIST EN 62090:2018
EUROPEAN STANDARD EN 62090
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2017
ICS 31.190; 31.200; 35.040 Supersedes EN 62090:2003
English Version
Product package labels for electronic components using bar
code and two- dimensional symbologies
(IEC 62090:2017)

Etiquettes d'emballage de produits pour composants Etiketten für Verpackungen elektronischer Bauelemente

électroniques, utilisant un code à barres et une symbologie unter Anwendung von Strichcodierung und

bidimensionelle zweidimensionaler Symbologien
(IEC 62090:2017) (IEC 62090:2017)

This European Standard was approved by CENELEC on 2017-05-16. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,

Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 62090:2017 E
---------------------- Page: 3 ----------------------
SIST EN 62090:2018
EN 62090:2017
European foreword

The text of document 91/1394/CDV, future edition 2 of IEC 62090, prepared by IEC/TC 91 "Electronics

assembly technology" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC

as EN 62090:2017.
The following dates are fixed:
(dop) 2018-02-16
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-05-16
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62090:2003.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice

The text of the International Standard IEC 62090:2017 was approved by CENELEC as a European

Standard without any modification.
IEC 60194 NOTE Harmonized as EN 60194.
IEC 60286-1 NOTE Harmonized as EN 60286-1.
IEC 60286-2 NOTE Harmonized as EN 60286-2.
IEC 60286-3 NOTE Harmonized as EN 60286-3.
IEC 60286-4 NOTE Harmonized as EN 60286-4.
IEC 60286-5 NOTE Harmonized as EN 60286-5.
IEC 60286-6 NOTE Harmonized as EN 60286-6.
IEC 61760-4 NOTE Harmonized as EN 61760-4.
ISO/IEC 15416 NOTE Harmonized as EN ISO/IEC 15416.
ISO/IEC 15438 NOTE Harmonized as EN ISO/IEC 15438.
ISO 3166-1 NOTE Harmonized as EN ISO 3166-1.
---------------------- Page: 4 ----------------------
SIST EN 62090:2018
EN 62090:2017
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are

indispensable for its application. For dated references, only the edition cited applies. For undated

references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:

www.cenelec.eu.
Publication Year Title EN/HD Year
ISO 8601 - Data elements and interchange formats - - -
Information interchange - Representation
of dates and times
ISO/IEC 15417 - Information technology - Automatic - -
identification and data capture techniques -
Code 128 bar code symbology
specification
ISO/IEC 15418 - Information technology - Automatic - -
identification and data capture techniques -
GS1 Application Identifiers and ASC MH10
Data Identifiers and maintenance
ISO/IEC 15434 - Information technology - Automatic - -
identification and data capture techniques -
Syntax for high-capacity ADC media
ISO/IEC 15459 series Information technology - Automatic - series
identification and data capture techniques -
Unique identification
ISO/IEC 16022 - Information technology - Automatic - -
identification and data capture techniques -
Data Matrix bar code symbology
specification
ISO/IEC 16388 - Information technology - Automatic - -
identification and data capture techniques -
Code 39 bar code symbology specification
ISO/IEC 18004 - Information technology - Automatic - -
identification and data capture techniques -
QR Code bar code symbology specification
ISO/IEC 19762 - Information technology - Automatic - -
identification and data capture (AIDC)
techniques - Harmonized vocabulary
ANSI MH 10.8.2 - Data Identifier and Application Identifier - -
Standard
---------------------- Page: 5 ----------------------
SIST EN 62090:2018
---------------------- Page: 6 ----------------------
SIST EN 62090:2018
IEC 62090
Edition 2.0 2017-04
INTERNATIONAL
STANDARD
colour
inside
Product package labels for electronic components using bar code and two-
dimensional symbologies
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.190; 31.200; 35.040.50 ISBN 978-2-8322-4160-8

Warning! Make sure that you obtained this publication from an authorized distributor.

® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST EN 62090:2018
– 2 – IEC 62090:2017 © IEC 2017
CONTENTS

FOREWORD ........................................................................................................................... 4

1 Scope .............................................................................................................................. 6

2 Normative references ...................................................................................................... 6

3 Terms and definitions ...................................................................................................... 7

4 Label data content and requirements ............................................................................... 7

4.1 Data elements – general ......................................................................................... 7

4.2 Mandatory data elements ........................................................................................ 8

4.2.1 Manufacturer item identification – DI “1P” and “25P” ........................................ 8

4.2.2 Customer product code – DI “P” ....................................................................... 8

4.2.3 Manufacturer identification – DI “18V” and “21V” ............................................. 8

4.2.4 Quantity – DI “Q” and “7Q” ............................................................................... 8

4.2.5 Traceability identification – DI “S” and “25S”, “1T” and “25T” ........................... 9

4.2.6 Country of origin – DI “4L” ............................................................................... 9

4.2.7 Production date – DI “16D” .............................................................................. 9

4.2.8 Package identification – DI “J” and “3S” ........................................................... 9

4.3 Optional data elements ......................................................................................... 10

4.3.1 Expiration date – DI “14D” ............................................................................. 10

4.3.2 Revision level – DI “2P” ................................................................................. 10

4.3.3 EIAJ ID – DI “3N” ........................................................................................... 10

4.3.4 Manufacturer location – DI “25L” .................................................................... 10

4.3.5 Customer assigned supplier code – DI “V” ..................................................... 10

4.3.6 Moisture sensitivity level – DI “13E” ............................................................... 11

4.3.7 URL – DI “33L” and “34L” .............................................................................. 11

4.4 Data semantics and formats defined by the data identifiers ................................... 11

4.5 Data representation .............................................................................................. 13

4.5.1 General formatting ......................................................................................... 13

4.5.2 General formatting for machine-readable symbols ......................................... 14

4.5.3 General formatting for human-readable information ....................................... 14

4.6 Data carrier selection ............................................................................................ 15

4.6.1 Linear bar code symbols ................................................................................ 15

4.6.2 Two-dimensional (2D) symbols ...................................................................... 16

4.7 Label size, layout, and location ............................................................................. 17

4.7.1 Label size ...................................................................................................... 17

4.7.2 Label layout ................................................................................................... 17

4.7.3 Examples of label and label layout ................................................................. 17

4.7.4 Label location ................................................................................................ 18

Annex A (informative) Quality aspects of labels – Adhesive characteristics and

durability of marking ...................................................................................................... 20

A.1 General ................................................................................................................. 20

A.2 Recommendations ................................................................................................ 20

A.2.1 General ......................................................................................................... 20

A.2.2 Adhesion characteristics ................................................................................ 20

A.2.3 Use and protection ........................................................................................ 20

A.2.4 Storage conditions ......................................................................................... 21

A.2.5 Durability ....................................................................................................... 21

A.2.6 Blank label stock contamination ..................................................................... 21

A.3 Method of test ....................................................................................................... 21

---------------------- Page: 8 ----------------------
SIST EN 62090:2018
IEC 62090:2017 © IEC 2017 – 3 –

A.3.1 Adhesive strength .......................................................................................... 21

A.3.2 Blank label stock contamination ..................................................................... 21

A.3.3 Recyclability .................................................................................................. 22

Annex B (informative) ISO/IEC 15434 Data Transfer Syntax ................................................ 23

Annex C (informative) URL .................................................................................................. 24

C.1 General ................................................................................................................. 24

C.2 Principle of using the URL DI “33L” ....................................................................... 24

C.3 Principle of using the P2P URL DI “34L” ............................................................... 25

C.4 Implementation of product to internet communication by help of P2P data

identifier “34L” ...................................................................................................... 25

Annex D (informative) Examples of data element short titles ................................................ 27

Annex E (informative) Package levels for component package labels ................................... 28

E.1 Inner and outer product packages ......................................................................... 28

E.2 "Unit load packages" / "handling units" / "overpacks" ............................................ 29

E.3 "Shipping units" / "transport packages" ................................................................. 29

Bibliography .......................................................................................................................... 30

Figure 1 – Label with a linear bar code, Data Matrix symbol and human-readable

information ............................................................................................................................ 17

Figure 2 – Label with minimum content, Data Matrix and human-readable information ......... 17

Figure 3 – Label with minimum content, QR Code and human-readable information ............. 18

Figure 4 – Typical label locations .......................................................................................... 19

Figure A.1 – Adhesion tester ................................................................................................. 22

Figure B.1 – Example of encoding data elements in a 2D symbol .......................................... 23

Figure C.1 – Smartphone with P2P App for access to P2P information.................................. 26

Figure E.1 – Examples for intimate/inner packages ............................................................... 28

Figure E.2 – Example for outer package with more than one inner package. ........................ 28

Figure E.3 – Example of "unit loads" or "handling units" or "overpacks" ................................ 29

Figure E 4 – Examples of transport packages ....................................................................... 29

Table 1 – Data identifiers ...................................................................................................... 11

Table 2 – Mandatory data elements and their representations .............................................. 13

Table 3 – Valid combinations of representation of optional data elements ............................. 14

Table 4 – Product package label symbol requirements − Code 39 ......................................... 15

Table 5 – Product package label symbol requirements − Code 128 ....................................... 16

Table C.1 – How to use the URL DI “33L”. ............................................................................ 24

Table C.2 – How to use the P2P URL DI “34L” ...................................................................... 25

Table C.3 –ASC DIs used for the P2P code example: .......................................................... 26

Table D.1 – Examples of data element short titles................................................................. 27

---------------------- Page: 9 ----------------------
SIST EN 62090:2018
– 4 – IEC 62090:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PRODUCT PACKAGE LABELS FOR ELECTRONIC COMPONENTS
USING BAR CODE AND TWO-DIMENSIONAL SYMBOLOGIES
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 62090 has been prepared by IEC technical committee 91:

Electronics assembly technology.

This second edition cancels and replaces the first edition published in 2002. This edition

constitutes a technical revision.

This edition includes the following significant technical changes with respect to the previous

edition:

a) Applicable data elements have been added. Data identifiers of those data elements are

“10D”, “14D”, ”2P”, “25L”, “18V”, “V”, “J”, “3S”, “13E”, “33L” and “34L”.
b) The following new informative annexes have been added:
– Annex C, URL;
– Annex D, Examples of data element short titles;
– Annex E, Package levels for component package labels.
---------------------- Page: 10 ----------------------
SIST EN 62090:2018
IEC 62090:2017 © IEC 2017 – 5 –
The text of this International Standard is based on the following documents:
CDV Report on voting
91/1394/CDV 91/1430/RVC

Full information on the voting for the approval of this International Standard can be found in

the report on voting indicated in the above table.

This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates

that it contains colours which are considered to be useful for the correct

understanding of its contents. Users should therefore print this document using a

colour printer.
---------------------- Page: 11 ----------------------
SIST EN 62090:2018
– 6 – IEC 62090:2017 © IEC 2017
PRODUCT PACKAGE LABELS FOR ELECTRONIC COMPONENTS
USING BAR CODE AND TWO-DIMENSIONAL SYMBOLOGIES
1 Scope

This document applies to labels on the packaging of electronic components for automatic

handling in B2B processes. These labels use linear bar code and two-dimensional (2D)

symbols. Labels for direct product marking and shipping labels are excluded. Labels required

on the packaging of electronic components that are intended for the retail channel of

distribution in B2C processes are also excluded from this document.

Bar code and 2D symbol markings are used, in general, for automatic identification and

automatic handling of components in electronics assembly lines. Intended applications include

systems that automate the control of component packages during production, inventory and

distribution.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their

content constitutes requirements of this document. For dated references, only the edition

cited applies. For undated references, the latest edition of the referenced document (including

any amendments) applies.

ISO/IEC 15417, Information technology – Automatic identification and data capture

techniques – Code 128 bar code symbology specification

ISO/IEC 15418, Information technology – Automatic identification and data capture

techniques – GS1 Application Identifiers and ASC MH 10 Data Identifiers and maintenance

ISO/IEC 15434, Information technology – Automatic identification and data capture

techniques – Syntax for high-capacity ADC media

ISO/IEC 15459 (all parts), Information technology – Automatic identification and data capture

techniques – Unique identification

ISO/IEC 16022, Information technology – Automatic identification and data capture

techniques – Data Matrix bar code symbology specification

ISO/IEC 16388, Information technology – Automatic identification and data capture

techniques – Code 39 bar code symbology specification

ISO/IEC 18004, Information technology – Automatic identification and data capture

techniques – QR Code bar code symbology specification

ISO/IEC 19762, Information technology – Automatic Identification and data capture (AIDC)

techniques – Harmonized vocabulary

ISO 8601, Data elements and interchange formats – Information interchange – Represen-

tation of dates and times
ANSI MH10.8.2, Data Identifier and Application Identifier Standard
---------------------- Page: 12 ----------------------
SIST EN 62090:2018
IEC 62090:2017 © IEC 2017 – 7 –
3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO/IEC 19762 and the

following apply.

ISO and IEC maintain terminological databases for use in standardization at the following

addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
component

electronic or electrical parts (e.g. bare printed circuit boards, integrated circuits, capacitors,

diodes, electronic modules, switches, heat sinks, resistors, electronic/electrical connectors,

etc.) used in a first level assembly
3.2
component package

commercial unit of components defined by the supplier including, if applicable, their means for

protection, structured alignment or for automated assembly
Note 1 to entry Typical examples are shown in Figure 4.

Note 2 to entry For the purposes of this document, the term “component package” includes a multiple of the

elements depicted in Figure 4, e.g. four reels in one box.
3.3
country of origin

manufacturing country where the product obtained its present identity as a part, subassembly,

or finished product

Note 1 to entry: The definition of “country of origin” should be in line with local regulations.

4 Label data content and requirements
4.1 Data elements – general

This document allows mutual agreements between the supplier and the customer to alter or

enhance any of the specifications done in this document.

The label format accommodates mandatory, optional and mutually agreed data elements.

Examples of data element short titles are given in Annex D.

This document does not supersede or replace any applicable safety or regulatory marking or

labelling requirements. This document is to be applied in addition to any other mandated

labelling requirements. The labelling requirements of this document and other documents may

be combined into one label or appear as separate labels.

Approval and conformity markings, branding elements and other information can be added

when applicable. Typically, these are not relevant for automatic processing, and therefore not

further outlined in this document.

The number included in the character count is exclusive of overhead characters such as start

and stop characters, data identifiers and any other characters required by a standard

symbology specification for properly encoded data.
All data elements encoded in a machine-readable medium shall be preceded by the
appropriate ISO/IEC 15418 or ANSI MH10.8.2 Data Identifier.
---------------------- Page: 13 ----------------------
SIST EN 62090:2018
– 8 – IEC 62090:2017 © IEC 2017

The manufacturer may add any data on the label. Additional linear bar codes or data elements

in the 2D symbol shall use the appropriate data identifiers.

If the optional data specified in 4.3 are indicated on the labels, they should be used as

described below.

Any further additional data or specific formats or anything else may mutually be agreed

between the supplier and the customer. Mutual agreements between trading partners are not

restricted by this document.

Data elements where global uniqueness is relevant shall follow the ISO/IEC 15459 series'

rules, or be combined with the ISO/IEC 15459 series' compliant company ID with data

identifier “18V” and be unique within the scope in this company.
4.2 Mandatory data elements
4.2.1 Manufacturer item identification – DI “1P” and “25P”
The manufacturer-assigned item identification is mandatory.

If “1P” is used, the conformity to the ISO/IEC 15459 series is achieved by its combination with

the globally unique company ID “18V”.
4.2.2 Customer product code – DI “P”

The customer product code is the code assigned to the product by the customer, and may be

transmitted together with the order.

NOTE Customer product codes on component packages are relatively widely adopted. But when manufacturing

on stock or selling via distributors, this information is not yet known.

Adding customer information on the label is subject to a purchase agreement between the supplier and the

customer. If there is no specific purchase agreement, it is up to the manufacturer to add this information or not.

4.2.3 Manufacturer identification – DI “18V” and “21V”
The manufacturer identification sha
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.