SIST EN 3364:2009

Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, softened, forging stock a or D ≤ 300 mm

This standard specifies the requirements relating to:
Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, softened, forging stock a or D  300 mm for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PM1802 (X5CrNiCu15-5) - Mit selbstverzehrender Elektrode umgeschmolzen, weichgeglüht, Schmiedevormaterial a oder D ≤ 300 mm

Diese Norm legt die Anforderungen an
Stahl FE PM1802 (X5CrNiCu15 5)  Mit selbstverzehrender Elektrode umgeschmolzen, weichgeglüht, Schmiedevor¬material a oder D ≤ 300 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PM1802 (X5CrNiCu15-5) - Refondu à l'életrode consommable, adouci, produits destinés à la forge a ou D ≤ 300 mm

Aeronavtika - Jeklo FE-PM1802 (X5CrNiCu15-5) - Materiali za kovanje a ali D <= 300 mm, mehčani, pretaljeni s talilno elektrodo

General Information

• Status: Withdrawn
• Publication Date: 01-Apr-2009
• Withdrawal Date: 05-Jan-2023
• ICS: 49.025.10 - Steels
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 06-Jan-2023
• Due Date: 29-Jan-2023
• Completion Date: 06-Jan-2023
• Ref Project: EN 3364:2007 - Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, softened, forging stock a or D ≤ 300 mm

Relations

• Replaced By: SIST EN 3364:2023 - Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted, softened - Forging stocks - a or D ≤ 300 mm
• Effective Date: 28-Dec-2022
• Revised: SIST EN 3364:2023 - Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted, softened - Forging stocks - a or D ≤ 300 mm
• Effective Date: 15-Sep-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YHU]HKUHQGHUpOHWURGH49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 3364:2007SIST EN 3364:2009en,de01-maj-2009SIST EN 3364:2009SLOVENSKI
STANDARD



SIST EN 3364:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3364
July 2007 ICS 49.025.10 English Version
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, softened, forging stock a or D ≤ 300 mm
Série aérospatiale - Acier FE-PM1802 (X5CrNiCu15-5) - Refondu à l'életrode consommable, adouci, produits destinés à la forge a ou D ≤ 300 mm
Luft- und Raumfahrt - Stahl FE-PM1802 (X5CrNiCu15-5) - Mit selbstverzehrender Elektrode umgeschmolzen, geglüht, Schmiedevormaterial a oder D ≤ 300
mm This European Standard was approved by CEN on 15 February 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3364:2007: ESIST EN 3364:2009



EN 3364:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4
SIST EN 3364:2009



EN 3364:2007 (E) 3 Foreword This document (EN 3364:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008, and conflicting national standards shall be withdrawn at the latest by January 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3364:2
...