iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 14516:2006/kprA1:2010

(Amendment)

Baths for domestic purposes

Baths for domestic purposes

Modification to EN 14516:2006 to bring it in line with the EC indications (see doc CEN/TC 163 N 704 rev2) and to the decision of CEN/TC 163 on Annex ZA (see doc CEN/TC 163/WG 4 N 198).

Badewannen für den Hausgebrauch

Baignoires à usage domestique

Kopalne kadi za domačo uporabo

General Information

Status
Not Published
Public Enquiry End Date
09-May-2010
ICS
91.140.70 - Sanitary installations
Technical Committee
IOVO - Water supply and waste water engineering
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
18-Apr-2024
Due Date
23-Apr-2024
Completion Date
18-Apr-2024
Directive
89/106/EEC - Construction products
Mandate
M/110 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on sanitary appliances
Ref Project
EN 14516:2006/FprA1 - Baths for domestic purposes

Relations

Consolidated By
SIST EN 14516:2006+A1:2010 - Baths for domestic purposes
Effective Date
19-Jan-2023
Consolidated By
SIST EN 14516:2006+A1:2010 - Baths for domestic purposes
Effective Date
18-Jan-2023
Consolidated By
SIST EN 14516:2006+A1:2010 - Baths for domestic purposes
Effective Date
22-Dec-2008
Amends
SIST EN 14516:2006 - Baths for domestic purposes
Effective Date
01-May-2010

Buy Standard

EN 14516:2006/kprA1:2010EN 14516:2006/kprA1:2010
PreviousNext
Draft
EN 14516:2006/kprA1:2010
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14516:2006/kprA1:2010
01-maj-2010
.RSDOQHNDGL]DGRPDþRXSRUDER
Baths for domestic purposes
Badewannen für den Hausgebrauch
Baignoires à usage domestique
Ta slovenski standard je istoveten z: EN 14516:2006/FprA1
ICS:
91.140.70 Sanitarne naprave Sanitary installations
SIST EN 14516:2006/kprA1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14516:2006/kprA1:2010

---------------------- Page: 2 ----------------------

SIST EN 14516:2006/kprA1:2010


EUROPEAN STANDARD
FINAL DRAFT
EN 14516:2006
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
March 2010
ICS 91.140.70
English Version
Baths for domestic purposes
Baignoires à usage domestique Badewannen für den Hausgebrauch
This draft amendment is submitted to CEN members for second unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 163.

This draft amendment A1, if approved, will modify the European Standard EN 14516:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14516:2006/FprA1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14516:2006/kprA1:2010
EN 14516:2006/FprA1:2010 (E)
Foreword
This document (EN 14516:2006/FprA1:2010) has been prepared by Technical Committee CEN/TC 163
“Sanitary appliances”, the secretariat of which is held by UNI.
nd
This document is currently submitted to the 2 UAP.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
This document supports the unified approach for CE marking of sanitary appliances covered by harmonised
European Standards elaborated by CEN/TC 163 under the Mandate M/110 "Sanitary appliances".
2

---------------------- Page: 4 ----------------------

SIST EN 14516:2006/kprA1:2010
EN 14516:2006/FprA1:2010 (E)
1 Modification to the Foreword
rd
Replace the 3 paragraph with the following:
"This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association and supports essential requirements of EU Directive(s)."

2 Modification to Clause 1, “Scope”
First paragraph, add the wording “and durability” after "for Cleanability”.

3 Modification to 3.3
Replace with the following:
“3.3
durability
attributes of materials and their surfaces intended to come into contact with water, which allow the anticipated
working life of the product”.

4 Insertion of new Clause 4 as follows:
“4 Classification
Class 1: Products complying with the requirements of Clause 5
Class 2: Products complying with the requirements of Clause 6”

Renumber and modify all cross references accordingly.

5 Modification to the heading of the renumbered Clause 5 (former Clause 4) as
follows:
Replace
“5 Requirements”
with
“5 Requirements for class 1 products”
3

---------------------- Page: 5 ----------------------

SIST EN 14516:2006/kprA1:2010
EN 14516:2006/FprA1:2010 (E)

6 Modification to the renumbered sub-clause 5.3.1 as follows: (former sub-clause
4.3.1)
Delete “of cleanability” at the end of the sentence.

7 Deletion of the renumbered sub-clause 5.4 “Dangerous substances” (former sub-
clause 4.4)
Delete sub-clause 5.4.

8 Insertion of new Clause 6 as follows:
“6 Requirements for class 2 products
6.1 General
The manufacturer shall provi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15091:2024(Main)
Sanitary tapware - Electronic opening and closing sanitary tapware
EN 15091:2024

The purpose of this document is to define requirements for marking, identification, leaktightness, electrical and operational safety and mechanical resistance for sanitary tapware with opening and closing controlled electronically.
The conditions of use for the supply system type are specified in Table 2:
[Table 2]
Annex B lists possible consequences of using a product outside its recommended operating range.
[Figure 1]
[Figure 2]
A vented domestic hot water and cold water supply system incorporating gravity hot water, mains cold water and alternative gravity cold water supply to sanitary appliances.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 200:2024(Main)
Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification
EN 200:2023

This European Standard specifies:
a)    the field of application for pillar taps, bib taps, single and multi-hole combination taps for use in:
1)   a supply system of Type 1 (see Figure 1);
2)   a supply system of Type 2 (see Figure 2);
b)    the dimensional, leaktightness, pressure resistance, hydraulic performance, mechanical strength, endurance and acoustic characteristics of nominal size ½ and ¾ single taps and combination taps;
c)    test methods to verify the characteristics.
d)    The tests described in this European Standard are type tests (laboratory tests) and not quality control tests carried out during manufacture.
This European Standard applies to draw-off taps (single taps and combination taps) for use with sanitary appliances installed in rooms used for bodily hygiene (cloakrooms, bathrooms etc.) and in kitchens, i.e. for use with baths, wash basins, bidets, showers and sinks.
Figure 1 shows a supply system of Type 1 with a pressure range of (0,05 to 1,0) Mpa [(0,5 to 10) bar].
Figure 2 shows a supply system of Type 2 with a pressure range of (0,01 to 1,0) Mpa [(0,1 to 10) bar].
This European Standard applies to sanitary draw-off taps of nominal size ½ and ¾ (PN 10).
The conditions of use and classifications are given in Table 1 but note the comments in Table 2.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 246:2022(Main)
Sanitary tapware - General specifications for aerators
EN 246:2021

This document specifies:
- the dimensional, mechanical, hydraulic and acoustic characteristics with which sanitary tapware aerators (with and without flow regulation) should comply;
- the procedures for testing these characteristics.
This document is applicable to:
- Sanitary tapware aerators intended to be mounted on tapware used with sanitary appliances in toilets, bathrooms and kitchens (e.g. single taps, combination tap assemblies, mechanical mixing valves, thermostatic mixing valves);
—-Sanitary tapware aerators used under the following pressure and temperature conditions:
Note 1: Sanitary tapware aerators can only be connected downstream of the obturator of the sanitary tapware product.
Note 2: For the purposes of brevity, sanitary tapware aerators will be detailed only as aerators in the rest of this document.
Note 3: The tests described in this document are type tests (laboratory tests) and not quality control tests carried out during manufacture.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17426:2019(Main)
Sanitary appliances - Drainage systems for the application of sanitary appliances
CEN/TR 17426:2019

This document describes the installation rules that must be followed to ensure proper functioning of the drainage system depending on the specified performance of the sanitary appliances.
These performance characteristics of sanitary appliances (defined in the harmonized standards EN 997, EN 13407, EN 14688, EN 14528 and EN 14527) are explained and brought into line with the application rules of standard series EN 12056.
According to Regulation (EU) 305/2011, legally binding information on building requirements must be provided by the National Product Information Point. Therefore, additional national requirements are mentioned informatively where information is available.

  • Technical report
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 33:2019(Main)
WC pans and WC suites - Connecting dimensions
EN 33:2019

This document specifies the connecting dimensions of WC pans and WC suites regardless of the materials used for their manufacture.
This document does not apply to siphonic action WC pans and WC suites.
NOTE 1   Other connecting dimensions are permitted, e. g. special designs of WC pans, if the manufacturer supplies or recommends the appropriate fittings.
NOTE 2   The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the appliance, which is left to the initiative of the manufacturer.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14527:2016+A1:2019(Main)
Shower trays for domestic purposes
EN 14527:2016+A1:2018

This European Standard specifies "characteristics", test methods and procedures for evaluation of conformity for shower trays used for domestic purposes which ensure that the product, when installed, used and maintained in accordance with the manufacturer's instructions, will satisfy cleanability and durability when used for personal hygiene.
This standard is applicable to all sizes and shapes of shower trays.
This standard does not cover shower trays for use with medical provisions.
NOTE 1   For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings.
NOTE 2   Annex A lists characteristics of materials commonly used for manufacturing shower trays.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14516:2015+A1:2019(Main)
Baths for domestic purposes
EN 14516:2015+A1:2018

This European Standard specifies "characteristics", test methods and procedures for evaluation of conformity for baths used for domestic purposes and personal hygiene, which ensure that the product, when installed and maintained in accordance with the manufacturer's instructions, will satisfy requirements for cleanability and durability.
This European Standard is applicable to all sizes and shapes of baths.
This European Standard does not cover baths for use with medical provisions.
NOTE 1   For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings.
NOTE 2   Annex A lists characteristics of materials commonly used for manufacturing baths.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12764:2015+A1:2019(Main)
Sanitary appliances - Specification for whirlpool baths
EN 12764:2015+A1:2018

This European Standard specifies "characteristics" for whirlpool baths, having a rated voltage of not more than 250 V for single phase appliances and 480 V for other appliances, which are intended to be installed in indoor domestic situations and used in accordance with the manufacturer’s instructions for personal hygiene. Such whirlpool baths are tested and supplied as a complete independent unit designed to be drained down after every use. They may be transported in several separate parts, for assembly on site, to facilitate delivery.
Safety aspects of Whirlpool baths (except use by young children and slow moving/weak elderly or disabled individuals) are covered by EN 60335 2 60.
Exclusions: this standard does not cover additional requirements for whirlpool baths intended for uses where specific medical provisions are required, or whirlpool baths for communal uses where they are not drained down after every use. Portable whirlpool devices are not covered by this standard.
For the purposes of this standard the term ‘domestic situations’ includes use in hotels, accommodation for students, hospitals and similar buildings.
Warning: Slow moving elderly or disabled persons should take care when using whirlpool baths. Young children should not be allowed to use whirlpool baths without supervision.
NOTE 1   It is unrealistic to expect manufacturers to provide a definition of what constitutes a ‘slow moving elderly or disabled person’, or ‘young children’. The former is the responsibility of the individual or a carer. The latter is a parental responsibility.
NOTE 2   When EN 60335-2-60 is amended to cover use of whirlpool baths by slow moving elderly or disabled persons and young children the warning given above will be deleted from this standard.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14428:2015+A1:2019(Main)
Shower enclosures - Functional requirements and test methods
EN 14428:2015+A1:2018

This European Standard specifies "characteristics" for shower enclosures for domestic purposes which ensure that the product, when installed in accordance with the manufacturer's installation instructions, gives satisfactory performance when used as intended.
This European Standard does not apply to shower cabinets or curtains and does not specify aesthetic and dimensional "characteristics".
NOTE   For the purposes of this document the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 997:2018(Main)
WC pans and WC suites with integral trap
EN 997:2018

This European Standard specifies constructional and performance requirements together with test methods for close-coupled suites, one-piece and independent WC pans with integral trap used for personal hygiene manufactured from glazed ceramics or stainless steel.
This European Standard does not apply to squatting toilets, WC pans without integral trap or flushing cisterns as separate appliances.
In the case of independent WC pans, the associated flushing cisterns and pressure valves are covered by other standards and the reference to cisterns in this standard is related only to the definition and requirements of flushing volume.
In the case of close-coupled suites and one-piece WCs, this standard also specifies design, performance requirements and the test methods for designated flushing cisterns with flushing mechanisms, inlet valves and overflows. For these products, this standard covers flushing cisterns designed to be connected to drinking water installations inside buildings.
Before installation of WCs, EN 12056 2 and national requirements need to be taken into consideration.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day