SIST EN 572-8:2012/kFprA1:2015

Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes

This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for basic soda lime silicate glass products, as defined in EN 572 1:2012, for use in building. It applies to supplied sizes or cut sizes for final end use.
This European Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m².
This European Standard does not apply to float glass supplied as jumbo, split sizes or oversize plates nor to polished wired glass, drawn sheet glass, patterned glass, patterned wired glass supplied as stock sizes. For specifications regarding these types of glass, see EN 572 2:2012, EN 572 3:2012, EN 572 4:2012, EN 572 5:2012 and EN 572 6:2012 respectively.
This European Standard does not apply to final cut sizes of wired or unwired channel shaped glass For specifications on this type of glass, see EN 572 7:2012.

Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 8: Liefermaße und Festmaße

Verre dans la construction - Produits verriers de silicate sodo-calcique de base - Partie 8: Mesures livrées et mesures découpées finales

Steklo v gradbeništvu - Osnovni izdelki iz natrij-kalcijevega silikatnega stekla - 8. del: Dobavljene in končne velikosti razreza

General Information

• Status: Not Published
• Public Enquiry End Date: 29-Jul-2015
• ICS: 81.040.20 - Glass in building
• Technical Committee: STV - Steklo, svetloba in razsvetljava v gradbeništvu
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 20-May-2016
• Due Date: 25-May-2016
• Completion Date: 20-May-2016
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Ref Project: EN 572-8:2012/FprA1 - Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes

Relations

• Consolidated By: SIST EN 572-8:2012+A1:2016 - Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes
• Effective Date: 18-Jan-2023
• Amends: SIST EN 572-8:2012 - Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes
• Effective Date: 01-Jul-2015
• Consolidated By: SIST EN 572-8:2012+A1:2016 - Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 572-8:2012/kFprA1:2015
01-julij-2015
6WHNORYJUDGEHQLãWYX2VQRYQLL]GHONLL]QDWULMNDOFLMHYHJDVLOLNDWQHJDVWHNOD
GHO'REDYOMHQHLQNRQþQHYHOLNRVWLUD]UH]D
Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut
sizes
Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 8: Liefermaße
und Festmaße
Verre dans la construction - Produits verriers de silicate sodo-calcique de base - Partie 8:
Mesures livrées et mesures découpées finales
Ta slovenski standard je istoveten z: EN 572-8:2012/FprA1
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN 572-8:2012/kFprA1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 572-8:2012/kFprA1:2015

---------------------- Page: 2 ----------------------

SIST EN 572-8:2012/kFprA1:2015

EUROPEAN STANDARD
FINAL DRAFT
EN 572-8:2012
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
May 2015
ICS 81.040.20
English Version
Glass in building - Basic soda lime silicate glass products - Part
8: Supplied and final cut sizes
Verre dans la construction - Produits verriers de silicate Glas im Bauwesen - Basiserzeugnisse aus Kalk-
sodo-calcique de base - Partie 8: Mesures livrées et Natronsilicatglas - Teil 8: Liefermaße und Festmaße
mesures découpées finales
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 129.

This draft amendment A1, if approved, will modify the European Standard EN 572-8:2012. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Ma
...