SIST EN 13702:2010
(Main)Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method
Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method
This European Standard specifies a method for determining the dynamic viscosity of a modified bituminous binder over a range of temperatures by means of a cone and plate viscometer. Although the method has been developed for modified binders, it is also suitable for other bituminous binders.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der dynamischen Viskosität von modifiziertem Bitumen - Platte-Kegel-Verfahren
Dieses Dokument legt ein Verfahren zur Bestimmung der dynamischen Viskosität eines modifizierten bitumenhaltigen Bindemittels mit einem Platte-Kegel-Viskosimeter über einen Temperaturbereich fest. Obwohl das Verfahren für modifizierte Bindemittel entwickelt wurde, ist es auch für andere bitumenhaltige Bindemittel geeignet. ANMERKUNG Anders als Penetrationsbitumen kann es sein, dass polymermodifizierte Bitumen (PmB) keine gerade Linie im Heukelom-Diagramm aufweisen. Das bedeutet, dass die Viskosität, um Angaben über die Temperaturabhängigkeit von PmB zu erhalten, bei verschiedenen Temperaturen gemessen werden sollte. WARNUNG — Die Anwendung dieser Europäischen Norm kann den Umgang mit gefährlichen Substanzen und Ausrüstungsteilen und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese Europäische Norm erhebt nicht den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Es liegt in der Verantwortung des Anwenders dieser Europäischen Norm, geeignete
Verhaltensregeln zur Sicherheit und Gesundheit festzulegen und vor der Anwendung zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.
Bitumes et liants bitumineux - Détermination de la viscosité dynamique des bitumes modifiés par la méthode cône et plateau
La présente norme européenne prescrit une méthode permettant de déterminer la viscosité dynamique d‘un liant
bitumineux modifié sur une plage de températures, au moyen d'un viscosimètre à cône et plateau. Bien que la
méthode ait été développée pour les liants modifiés, elle est également applicable pour d’autres liants bitumineux.
NOTE Contrairement aux bitumes purs spécifiés par la pénétrabilité, les bitumes modifiés par des polymères (BMP)
peuvent ne pas décrire une ligne droite sur le diagramme de Heukelom. En conséquence, pour obtenir des informations sur la
susceptibilité à la température des BMP, il est recommandé de mesurer leur viscosité à différentes températures.
AVERTISSEMENT — L'utilisation de la présente Norme européenne implique l'intervention de produits,
d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'est pas censée
aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur
de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des
restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje dinamične viskoznosti modificiranih bitumnov z metodo s konusom in ploščo
Ta evropski standard določa metodo za določevanje dinamične viskoznosti modificiranih bitumnov z razponom temperatur z metodo z konusom in ploščo. Čeprav je bila metoda razvita za modificirana veziva, je prav tako primerna za druga bitumenska veziva.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PRGLILFLUDQLKBitumen und bitumenhaltige Bindemittel - Bestimmung der dynamischen Viskosität von modifiziertem Bitumen - Platte-Kegel-VerfahrenBitumes et liants bitumineux - Détermination de la viscosité dynamique des bitumes modifiés par la méthode cône et plateauBitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13702:2010SIST EN 13702:2010en,fr,de01-oktober-2010SIST EN 13702:2010SLOVENSKI
STANDARDSIST EN 13702-1:20041DGRPHãþD
SIST EN 13702:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13702
May 2010 ICS 75.140; 91.100.50 Supersedes EN 13702-1:2003English Version
Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method
Bitumes et liants bitumineux -Détermination de la viscosité dynamique des bitumes modifiés - Méthode cône et plateau
Bitumen und bitumenhaltige Bindemittel - Bestimmung der dynamischen Viskosität von modifiziertem Bitumen - Platte-Kegel-Verfahren This European Standard was approved by CEN on 23 April 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13702:2010: ESIST EN 13702:2010
EN 13702:2010 (E) 2 Contents
page Foreword . 31Scope . 42Normative references . 43Principle . 44Apparatus . 55Sampling . 56Procedure . 57Expression of results . 68Precision . 68.1Repeatability . 68.2Reproducibility . 69Test report . 6 SIST EN 13702:2010
EN 13702:2010 (E) 3 Foreword This document (EN 13702:2010) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR/BNPé. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2010, and conflicting national standards shall be withdrawn at the latest by November 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13702-1:2003. This document was formerly known as EN 13702 – Part 1. As Part 2 of this standard was merged with another standard into EN 13302, this standard was renumbered into EN 13702. According to the CEN/CENELEC Internal Regulations, the n
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PRGLILFLUDQLKRBitumen und bitumenhaltige Bindemittel - Bestimmung der dynamischen Viskosität von modifiziertem Bitumen - Platte-Kegel-VerfahrenBitumes et liants bitumineux - Détermination de la viscosité dynamique des bitumes modifiés - Méthode cône et plateauBitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method - Cone and plate method91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:FprEN 13702kSIST FprEN 13702:2010en,de01-januar-2010kSIST FprEN 13702:2010SLOVENSKI
STANDARD
kSIST FprEN 13702:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 13702
October 2009 ICS 75.140; 91.100.50 Will supersede EN 13702-1:2003English Version
Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen by cone and plate method - Cone and plate method
Bitumes et liants bitumineux -Détermination de la viscosité dynamique des bitumes modifiés - Méthode cône et plateau
Bitumen und bitumenhaltige Bindemittel - Bestimmung der dynamischen Viskosität von modifiziertem Bitumen - Platte-Kegel-Verfahren This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 336.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 13702:2009: EkSIST FprEN 13702:2010
FprEN 13702:2009 (E) 2 Contents
page Foreword . 31Scope . 42Normative references . 43Principle . 44Apparatus . 55Sampling . 56Procedure . 57Expression of results . 68Precision . 68.1Repeatability . 68.2Reproducibility . 69Test report . 6 kSIST FprEN 13702:2010
FprEN 13702:2009 (E) 3 Foreword This document (FprEN 13702:2009) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 13702-1:2003. This document was formerly known as EN 13702 – Part 1. As Part 2 of this standard was me
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.