oSIST prEN 10249-1:2006
Cold formed steel sheet piling - Part 1: Technical delivery conditions
Cold formed steel sheet piling - Part 1: Technical delivery conditions
This part of this European Standard specifies the requirements for cold formed non alloy steel sheet piling produced from hot rolled strip or sheet with a thickness equal to oe greater than 2 mm in respect of its chemical composition, mechanical and technological properties and delivery conditions.The products specified are for general, structural and civil engineering works.Requirements in respect of tolerances on shape and dimensions are specified in Part 2 of this European Standard.
Kaltgeformte Spundbohlen aus unlegierten Stählen - Teil 1: Technische Leiferbedingungen
Dieser Teil der Europäischen Norm enthält die Anforderungen an kaltgeformte, unlegierte Stahlspundbohlen aus warmgewalztem Band oder Blech mit einer Dicke 3 2 mm hinsichtlich ihrer chemischen Zusammensetzung, mechanischen und technologischen Eigenschaften sowie Lieferbedingungen.
Die angegebenen Erzeugnisse eignen sich für allgemeine Zwecke, Stahlbau und Tiefbauarbeiten.
Festlegungen für die Grenzabmaße und Formtoleranzen sind in Teil 2 dieser Europäischen Norm enthalten.
Palplanches en acier formées a froid - Partie 1: Conditions techniques de livraison
La présente partie de cette Norme européenne spécifie les prescriptions relatives a la composition chimique, aux caractéristiques mécaniques et aux conditions de livraison des palplanches en acier allié ou non allié formées a froid a partir de bandes ou tôles laminées a chaud d’épaisseur égale ou supérieure a 2 mm.
Les produits spécifiés sont destinés a etre utilisés dans la réalisation d'ouvrages divers, d'ouvrages de génie civil et d'éléments de construction.
Les exigences relatives aux tolérances de forme et de dimensions sont spécifiés dans la partie 2 de la présente Norme européenne.
Hladno oblikovane zagate iz nelegiranih jekel - 1. del: Tehnični dobavni pogoji
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 10249-1:2006
01-junij-2006
+ODGQRREOLNRYDQH]DJDWHL]QHOHJLUDQLKMHNHOGHO 7HKQLþQLGREDYQLSRJRML
Cold formed steel sheet piling - Part 1: Technical delivery conditions
Kaltgeformte Spundbohlen aus unlegierten Stählen - Teil 1: Technische
Leiferbedingungen
Palplanches en acier formées a froid - Partie 1: Conditions techniques de livraison
Ta slovenski standard je istoveten z: prEN 10249-1
ICS:
77.140.45 Nelegirana jekla Non-alloyed steels
77.140.70 Jekleni profili Steel profiles
oSIST prEN 10249-1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 10249-1:2006
---------------------- Page: 2 ----------------------
oSIST prEN 10249-1:2006
EUROPEAN STANDARD
DRAFT
prEN 10249-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS 77.140.70 Will supersede EN 10249-1:1995
English Version
Cold formed steel sheet piling - Part 1: Technical delivery
conditions
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ECISS/TC 10.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10249-1:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 10249-1:2006
prEN 10249-1:2006 (E)
Contents
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .5
4 Information to be supplied by the purchaser .5
5 Mass of steel .5
6 Classification and designation.5
7 Technical requirements .6
8 Inspection and testing.8
9 Marking .10
10 Options .11
11 Evaluation of Conformity.11
Annex C Evaluation of conformity.17
C.1 General.17
C.2 Initial type testing
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.