Optical fibre cables - Part 1-303: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon dimensions - Aperture gauge, Method G3 (IEC 60794-1-303:2023)

Lichtwellenleiterkabel - Teil 1-303: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Prüfverfahren für Kabelelemente - Bandmaße - Aperturmessgerät, Verfahren G3 (IEC 60794-1-303:2023)

Câbles à fibres optiques - Partie 1-303: Spécification générique - Procédures fondamentales d'essai des câbles optiques - Dimensions des rubans - Gabarit d’ouverture, méthode G3 (IEC 60794-1-303:2023)

Optični kabli - 1-303. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Preskusne metode za kabelske elemente - Mere odprtine - Metoda G3 (IEC 60794-1-303:2023)

General Information

Status
Published
Public Enquiry End Date
30-Sep-2022
Publication Date
31-May-2023
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
17-May-2023
Due Date
22-Jul-2023
Completion Date
01-Jun-2023

Relations

Buy Standard

Standard
EN IEC 60794-1-303:2023
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 60794-1-303:2022
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60794-1-303:2023
01-julij-2023
Nadomešča:
SIST EN IEC 60794-1-23:2020

Optični kabli - 1-303. del: Splošna specifikacija - Osnovni preskusni postopki za

optične kable - Preskusne metode za kabelske elemente - Mere odprtine - Metoda
G3 (IEC 60794-1-303:2023)

Optical fibre cables - Part 1-303: Generic specification - Basic optical cable test

procedures - Cable element test methods - Ribbon dimensions - Aperture gauge,
Method G3 (IEC 60794-1-303:2023)

Lichtwellenleiterkabel - Teil 1-303: Fachgrundspezifikation - Grundlegende Prüfverfahren

für Lichtwellenleiterkabel - Prüfverfahren für Kabelelemente - Bandmaße -
Aperturmessgerät, Verfahren G3 (IEC 60794-1-303:2023)
Câbles à fibres optiques - Partie 1-303: Spécification générique - Procédures
fondamentales d'essai des câbles optiques - Dimensions des rubans - Gabarit
d’ouverture, méthode G3 (IEC 60794-1-303:2023)
Ta slovenski standard je istoveten z: EN IEC 60794-1-303:2023
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
SIST EN IEC 60794-1-303:2023 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60794-1-303:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 60794-1-303:2023
EUROPEAN STANDARD EN IEC 60794-1-303
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2023
ICS 33.180.10 Supersedes EN IEC 60794-1-23:2019 (partially)
English Version
Optical fibre cables - Part 1-303: Generic specification - Basic
optical cable test procedures - Ribbon dimensions - Aperture
gauge, method G3
(IEC 60794-1-303:2023)

Câbles à fibres optiques - Partie 1-303: Spécification Lichtwellenleiterkabel - Teil 1-303: Fachgrundspezifikation -

générique - Procédures fondamentales d'essai des câbles Grundlegende Prüfverfahren für Lichtwellenleiterkabel -

optiques - Dimensions du ruban - Gabarit d'ouverture, Prüfverfahren für Kabelelemente - Bandmaße -

méthode G3 Aperturmessgerät, Verfahren G3
(IEC 60794-1-303:2023) (IEC 60794-1-303:2023)

This European Standard was approved by CENELEC on 2023-05-10. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 60794-1-303:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60794-1-303:2023
EN IEC 60794-1-303:2023 (E)
European foreword

The text of document 86A/2299/FDIS, future edition 1 of IEC 60794-1-303, prepared by SC 86A

"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and

approved by CENELEC as EN IEC 60794-1-303:2023.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2024-02-10

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2026-05-10

document have to be withdrawn

This document partially supersedes EN IEC 60794-1-23:2019 and all of its amendments and

corrigenda (if any).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Any feedback and questions on this document should be directed to the users’ national committee. A

complete listing of these bodies can be found on the CENELEC website.
Endorsement notice

The text of the International Standard IEC 60794-1-303:2023 was approved by CENELEC as a

European Standard without any modification.

In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 60794-1-31:2021 NOTE Approved as EN IEC 60794-1-31:2021 (not modified)
---------------------- Page: 4 ----------------------
SIST EN IEC 60794-1-303:2023
EN IEC 60794-1-303:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the

relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available

here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60794-1-2 - Optical fibre cables - Part 1-2: Generic EN IEC 60794-1-2 -
specification - Basic optical cable test
procedures - General guidance

IEC 60794-1-23 2019 Optical fibre cables - Part 1-23: Generic EN IEC 60794-1-23 2019

specification - Basic optical cable test
procedures - Cable element test methods
---------------------- Page: 5 ----------------------
SIST EN IEC 60794-1-303:2023
---------------------- Page: 6 ----------------------
SIST EN IEC 60794-1-303:2023
IEC 60794-1-303
Edition 1.0 2023-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical fibre cables –
Part 1-303: Generic specification – Basic optical cable test procedures – Ribbon
dimensions – Aperture gauge, method G3
Câbles à fibres optiques –
Partie 1-303: Spécification générique – Procédures fondamentales d'essai des
câbles optiques – Dimensions du ruban – Gabarit d’ouverture, méthode G3
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10 ISBN 978-2-8322-6757-8

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 60794-1-303:2023
– 2 – IEC 60794-1-303:2023 © IEC 2023
CONTENTS

FOREWORD ........................................................................................................................... 3

INTRODUCTION ..................................................................................................................... 5

1 Scope .............................................................................................................................. 6

2 Normative references ...................................................................................................... 6

3 Terms and definitions ...................................................................................................... 6

4 General requirements ...................................................................................................... 6

5 Method G3: Ribbon dimensions – Visual method ............................................................. 7

5.1 Object ..................................................................................................................... 7

5.2 Sample ................................................................................................................... 7

5.3 Apparatus ............................................................................................................... 7

5.4 Procedure ............................................................................................................... 7

5.5 Requirement ........................................................................................................... 8

5.6 Details to be specified ............................................................................................. 8

Bibliography ............................................................................................................................ 9

Figure 1 – Aperture gauge ...................................................................................................... 7

---------------------- Page: 8 ----------------------
SIST EN IEC 60794-1-303:2023
IEC 60794-1-303:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 1-303: Generic specifi
...

SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-303:2022
01-oktober-2022
Nadomešča:
SIST EN IEC 60794-1-23:2020

Optični kabli - 1-303. del: Splošna specifikacija - Osnovni preskusni postopki za

optične kable - Preskusne metode za kabelske elemente - Mere odprtine - Metoda

Optical fibre cables - Part 1-303: Generic specification - Basic optical cable test

procedures - Cable element test methods - Ribbon dimensions - Aperture gauge,
Method G3
Câbles à fibres optiques - Partie 1-303: Spécification générique - Procédures
fondamentales d'essai des câbles optiques - Dimensions des rubans - Gabarit
d’ouverture, méthode G3
Ta slovenski standard je istoveten z: prEN IEC 60794-1-303:2022
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-303:2022 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60794-1-303:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60794-1-303:2022
86A/2199/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-303 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-06-10 2022-09-02
SUPERSEDES DOCUMENTS:
86A/2157/CD, 86A/2194/CC
IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING

Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.

Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of

which they are aware and to provide supporting documentation.
TITLE:

Optical fibre cables - Part 1-303: Generic specification - Basic optical cable test procedures -

Cable element test methods - Ribbon dimensions - Aperture gauge, Method G3
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:

Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this

electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.

You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without

permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60794-1-303:2022
IEC CDV 60794-1-303/Ed1 © IEC 2022 – 2 – 86A/2199/CDV
1 CONTENTS

2 CONTENTS ............................................................................................................................ 2

3 FOREWORD ........................................................................................................................... 3

4 1 Scope .............................................................................................................................. 5

5 2 Normative references ...................................................................................................... 5

6 3 Terms and definitions ...................................................................................................... 5

7 4 General requirements ...................................................................................................... 5

8 5 Method G3: Ribbon dimensions – Visual method ............................................................. 5

9 5.1 Object ..................................................................................................................... 5

10 5.2 Sample ................................................................................................................... 6

11 5.3 Apparatus ............................................................................................................... 6

12 5.4 Procedure ............................................................................................................... 6

13 5.5 Requirement ........................................................................................................... 6

14 5.6 Details to be specified ............................................................................................. 6

15 Bibliography ............................................................................................................................ 7

18 Figure 1 – Aperture gauge ...................................................................................................... 6

---------------------- Page: 4 ----------------------
oSIST prEN IEC 60794-1-303:2022
IEC CDV 60794-1-303/Ed1 © IEC 2022 – 3 – 86A/2199/CDV
21 INTERNATIONAL ELECTROTECHNICAL COMMISSION
22 ____________
24 OPTICAL FIBRE CABLES
26 Part 1-303: Generic specification
27 – Basic optical cable test procedures
28 – Ribbon dimensions – Aperture gauge, method G3
30 FOREWORD

31 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

32 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

33 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

34 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

35 Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their

36 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

37 may participate in this preparatory work. International, governmental and non-governmental organizations liaising

38 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

39 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

40 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

41 consensus of opinion on the relevant subjects since each technical committee has representation from all

42 interested IEC National Committees.

43 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

44 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

45 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

46 misinterpretation by any end user.

47 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

48 transparently to the maximum extent possible in their national and regional publications. Any divergence between

49 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

50 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

51 assess
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.