Precast concrete products - Floor plates for floor systems

This European standard deals with the requirements, the basic performance criteria and evaluation of conformity for precast floor plates made of reinforced or prestressed normal weight concrete according to EN 1992 1 1:2004, used in conjunction with cast-in-situ concrete (topping) for the construction of composite floor slabs. Annex B gives different types of composite slabs made with floor plates.
These floor plates, with or without void formers, can include lattice girders or stiffening ribs incorporated during the precasting.
They shall be manufactured in factories by casting, slip forming or extrusion.
The products covered by this standard are intended to be used as part of structural floors in applications such as:
-   floors and roofs of buildings (including industrial and storage buildings, public buildings as schools, hospitals, etc.);
-   parking/circulation areas;
-   cover for culverts;
-   etc.
The products may be used in seismic areas provided they fulfil the requirements specific to this use.
This standard does not cover:
-   reinforced and prestressed floor plates with a nominal thickness less than 40 mm;
-   prestressed floor plates with a nominal thickness less than 50 mm without stiffening ribs or lattice girder;
-   floor plates with a very smooth upper face, such as defined in 6.2.5 of EN 1992-1-1:2004.

Betonfertigteile - Deckenplatten mit Ortbetonergänzung

Produits préfabriqués en béton - Prédalles pour systèmes de planchers

La présente Norme européenne spécifie les prescriptions, les critères relatifs aux performances de base et
d’évaluation de la conformité pour les prédalles préfabriquées en béton armé ou précontraint de granulats courants
conformément à l’EN 1992-1-1:2004, utilisées conjointement avec du béton coulé en place (dalle rapportée) pour la
construction de dalles de planchers composites. L’Annexe B donne différents types de dalles composites fabriquées
avec des prédalles.
Ces prédalles, avec ou sans blocs d’élégissement, peuvent comprendre des raidisseurs à treillis ou des nervures de
raidissement incorporés pendant la préfabrication.
Elles doivent être fabriquées en usine par moulage, par filage ou par extrusion.
Les produits visés par la présente norme sont destinés à faire partie de planchers structurels pour des applications
telles que :
- planchers et toitures de bâtiments (y compris des bâtiments industriels et de stockage, des bâtiments publics
comme les écoles, des hôpitaux, etc.) ;
- zones de stationnement/circulation ;
- couvercles pour cadres enterrés ;
- etc.
Les produits peuvent être utilisés en zones sismiques à condition qu’ils répondent aux prescriptions spécifiques
à cette utilisation.
La présente norme ne vise pas :
- les prédalles en béton armé !et les prédalles précontraintes" avec une épaisseur nominale inférieure à 40 mm ;
- les prédalles précontraintes avec une épaisseur nominale inférieure à 50 mm !sans nervure de raidissement,
ni raidisseur à treillis" ;
- les prédalles avec une face supérieure très lisse, tel que défini au paragraphe 6.2.5 de l'EN 1992-1-1:2004.

Montažni betonski izdelki - Etažne plošče za etažne sisteme

General Information

Status
Withdrawn
Publication Date
09-Feb-2009
Withdrawal Date
23-Nov-2010
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
20-Oct-2010
Due Date
12-Nov-2010
Completion Date
24-Nov-2010

Relations

Buy Standard

Standard
EN 13747:2005+A1:2009
English language
87 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Betonfertigteile - Deckenplatten mit OrtbetonergänzungProduits préfabriqués en béton - Prédalles pour systèmes de planchersPrecast concrete products - Floor plates for floor systems91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 13747:2005+A1:2008SIST EN 13747:2005+A1:2009en,fr01-marec-2009SIST EN 13747:2005+A1:2009SLOVENSKI
STANDARDSIST EN 13747:2005/AC:2007SIST EN 13747:20051DGRPHãþD



SIST EN 13747:2005+A1:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13747:2005+A1
October 2008 ICS 91.100.30 Supersedes EN 13747:2005English Version
Precast concrete products - Floor plates for floor systems
Produits préfabriqués en béton - Prédalles pour systèmes de planchers
Betonfertigteile - Deckenplatten mit Ortbetonergänzung This European Standard was approved by CEN on 17 February 2005 and includes Corrigendum 1 issued by CEN on 6 December 2006 and Amendment 1 approved by CEN 14 September 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13747:2005+A1:2008: ESIST EN 13747:2005+A1:2009



EN 13747:2005+A1:2008 (E) 2 Contents Page The numbering of clauses is strictly related to EN 13369:2004 Common rules for precast concrete products, at least for the first three digits. When a clause of EN 13369:2004 is not relevant or included in a more general reference of this standard, its number is omitted and this may result in a gap on numbering. Foreword.5 Introduction.7 1 Scope.8 2 Normative references.8 3 Terms and definitions.9 4 Requirements.13 4.1 Material requirements.13 4.1.1 General.13 4.1.2 Constituent materials of concrete.13 4.1.3 Reinforcing steel.13 4.1.4 Prestressing steel.13 4.1.5 Inserts and connectors.13 4.2 Production requirements.14 4.2.1 Concrete production.14 4.2.2 Hardened concrete.14 4.2.3 Structural reinforcement.14 4.2.4 Positioning of reinforcement.16 4.3 Finished product requirements.22 4.3.1 Geometrical properties.22 4.3.2 Surface characteristics.23 4.3.3 Mechanical resistance.23 4.3.4 Resistance and reaction to fire.25 4.3.5 Acoustic properties.25 4.3.6 Thermal properties.26 4.3.7 Durability.26 4.3.8 Other requirements.26 5 Test methods.26 5.1 Tests on concrete.26 5.2 Measuring of dimensions and surface characteristics.26 5.2.1 Position of reinforcement.26 5.2.2 Floor plate dimensions.27 5.2.3 Straightness of edges.27 5.2.4 Flatness of the moulded surface.27 5.2.5 Surface characteristics.27 5.3 Weight of the products.28 5.4 Prestressing.28 5.4.1 Initial prestressing force.28 5.4.2 Slippage of tendons.28 6 Evaluation of conformity.28 6.1 General.28 6.2 Type testing.28 6.3 Factory production control.29 7 Marking.29 SIST EN 13747:2005+A1:2009



EN 13747:2005+A1:2008 (E) 3 8 Technical documentation.29 Annex A (normative)
Inspection schemes.30 A.1 Process inspection.30 A.2 Finished product inspection.31 Annex B (informative)
Types of composite slabs.32 B.1 Scope.32 B.2 Different types of composite slabs.32 B.2.1 Solid composite slabs.32 B.2.2 Hollow composite slabs.32 B.3 Topping.33 Annex C (informative)
Stiffening ribs and void formers.34 C.1 Stiffening ribs.34 C.1.1 Nominal width of ribs.34 C.1.2 Nominal height of ribs.34 C.1.3 Nominal space between ribs.34 C.1.4 Distance between the edge of the floor plate and the centre line of the nearest rib.35 C.1.5 Specific case of reinforced floor plate with a single rib.35 C.2 Void formers.36 C.3 Additional examples of stiffening ribs and ball void formers.37 C.3.1 General.37 C.3.2 Dimensions.38 Annex D (informative)
Monolithism of composite slabs.40 D.1 General.40 D.2 Strength of connecting reinforcement.41 D.3 Anchorage of connecting reinforcement.41 Annex E (informative)
Detailing of support joints and anchorage of reinforcement of composite slabs.44 E.1 Scope.44 E.2 General.44 E.2.1 Effective support length.44 E.2.2 Types of connections.45 E.3 Anchorage of lower reinforcements of the composite slab.47 E.3.1 Anchorage on the end support.47 E.3.2 Anchorage in special cases.49 Annex F (informative)
Design of composite slab.53 F.1 General.53 F.2 Connections between adjacent floor plates.53 F.3 Bending ultimate limit state.55 F.4 Serviceability limit state.55 F.4.1 General.55 F.4.2 Serviceability limit state design of composite slab made of reinforced floor plate.56 F.4.3 Serviceability limit states design of composite slabs made of prestressed floor plates.59 F.5 Transverse bending design of composite slab.59 Annex G (informative)
Concrete strength at time of prestressing.61 G.1 General.61 G.1.1 Procedure.61 G.1.2 Interpretation of results.61 Annex H (informative)
Composite slabs with void formers.63 H.1 General.63 H.2 Material properties.63 H.2.1 Polystyrene/Air voids.63 H.2.2 Clay.63 H.3 Temperature profiles.64 H.4 Other items to be considered.64 Annex J (normative)
Testing to determine erection spans (type testing).65 SIST EN 13747:2005+A1:2009



EN 13747:2005+A1:2008 (E) 4 J.1 General.65 J.2 Determination of erection span.65 J.2.1 Failure design (condition a).66 J.2.2 Checking of the deflection (condition b).67 J.3 Equipment.67 J.4 Preparation of test piece.67 J.5 Loading.69 J.6 Interpretation of results.69 J.7 Test report.70 Annex K (informative)
Anchorage capacity of loops.71 Annex ZA (informative)
!Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.74 ZA.1 Scope and relevant characteristics.74 ZA.2 Procedure for attestation of conformity of floor plates for floor systems.76 ZA.2.1 System of attestation of conformity.76 ZA.2.2 EC Certificate and Declaration of conformity.77 ZA.3 CE marking and labelling.78 ZA.3.1 General.78 ZA.3.2 Declaration of geometrical data and material properties (method 1).80 ZA.3.3 Declaration of product properties (method 2).82 ZA.3.4 Declaration of compliance with a given design specification provided by the client (method 3a).84 ZA.3.5 Declaration of compliance with a given design specification provided by the manufacturer according to the client's order (method 3b)".85
SIST EN 13747:2005+A1:2009



EN 13747:2005+A1:2008 (E) 5 Foreword This document (EN 13747:2005+A1:2008) has been prepared by Technical Committee CEN/TC 229 “Precast concrete products”, the secretariat of which is held by AFNOR, and was examined by and agreed with a joint working party appointed by the Liaison Group CEN/TC 229-CEN/TC 250, particularly for its compatibility with structural Eurocodes. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by April 2009. This document includes Amendment 1, approved by CEN on 2008-09-14 and Corrigendum 1 issued by CEN on 2006-12-06. This document supersedes EN 13747:2005. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ". The modifications of the related CEN Corrigendum have been implemented at the appropriate places in the text and are indicated by the tags ˜ ™. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC. For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This standard is one of a series of product standards for precast concrete products. For common aspects reference is made to EN 13369: Common rules for precast products, from which also the relevant requirements of the EN 206-1: Concrete — Part 1: Specification, performances, production and conformity are taken. The references to EN 13369 by CEN/TC 229 product standards are intended to make them homogeneous and to avoid repetitions of similar requirements. Eurocodes are taken as a common reference for design aspects. The installation of some structural precast concrete products is dealt with by ENV 13670-1: Execution of concrete structures — Part 1: Common rules, which has at the moment the status of a European prestandard. In all countries it can be accompanied by alternatives for national application and it shall not be treated as a European standard. The programme of standards for structural precast concrete products comprises the following standards, in some cases consisting on several parts:  EN 1168, Precast concrete products — Hollow core slabs  EN 12794, Precast concrete products — Foundation piles  EN 12843, Precast concrete products — Masts and poles  EN 13747, Precast concrete products — Floor plates for floor systems SIST EN 13747:2005+A1:2009



EN 13747:2005+A1:2008 (E) 6  ˜prEN 15037, Precast concrete products — Beam-and-block floor systems™  EN 13224, Precast concrete products — Ribbed floor elements  EN 13225, Precast concrete products — Linear structural elements  EN 14992, Precast concrete products — Wall elements  EN 13693, Precast concrete products — Special roof elements  EN 14844, Precast concrete products — Box culverts  EN 13978, Precast concrete products — Precast concrete garages  EN 14991, Precast concrete products — Foundation elements  EN 15050, Precast concrete products — Bridge elements  EN 14843, Precast concrete products — Stairs This standard defines in Annex ZA the application methods of CE marking to products designed using the relevant EN Eurocodes (EN 1992-1-1:2004 and EN 1992-1-2:2004). Where, in default of applicability conditions of EN Eurocodes to the works of destination, design Provisions other than EN Eurocodes are used for mechanical strength and/or fire resistance, the conditions to affix CE marking to the product are described in ZA.3.4. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 13747:2005+A1:2009



EN 13747:2005+A1:2008 (E) 7 Introduction The evaluation of conformity given in this standard refers to the completed precast elements which are supplied to the market and covers all the production operations carried out in the factory. For design rules reference is made to EN 1992-1-1:2004. Additional complementary rules are provided where necessary. In clauses 4.3.3 and 4.3.4, the present standard includes specific provisions resulting from the application of EN 1992-1-1:2004 and EN 1992-1-2:2004 rules made specific for the concerned product. The use of these provisions is consistent with a design of works made with EN 1992-1-1:2004 and EN 1992-1-2:2004. SIST EN 13747:2005+A1:2009



EN 13747:2005+A1:2008 (E) 8 1 Scope This European standard deals with the requirements, the basic performance criteria and evaluation of conformity for precast floor plates made of reinforced or prestressed normal weight concrete according to EN 1992-1-1:2004, used in conjunction with cast-in-situ concrete (topping) for the construction of composite floor slabs. Annex B gives different types of composite slabs made with floor plates. These floor plates, with or without void formers, can include lattice girders or stiffening ribs incorporated during the precasting. They shall be manufactured in factories by casting, slip forming or extrusion. The products covered by this standard are intended to be used as part of structural floors in applications such as:  floors and roofs of buildings (including industrial and storage buildings, public buildings as schools, hospitals, etc.);  parking/circulation areas;  cover for culverts;  etc. The products may be used in seismic areas provided they fulfil the requirements specific to this use. This standard does not cover:  reinforced !and prestressed" floor plates with a nominal thickness less than 40 mm;  prestressed floor plates with a nominal thickness less than 50 mm !without stiffening ribs or lattice girder";  floor plates with a very smooth upper face, such as defined in 6.2.5 of EN 1992-1-1:2004. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13369:2004, Common rules for precast concrete products. ˜EN 10080:2005™, Steel for the reinforcement of concrete — Weldable reinforcing steel — General. EN 12390-4, Testing hardened concrete — Part 4: Compressive strength — Specification for testing machines. EN 12390-6, Testing hardened concrete — Part 6: Tensile splitting strength of test specimens. EN 1991-1-1:2002, Eurocode 1: Actions on structures — Part 1-1: General actions — Densities, self-weight, imposed loads for buildings. EN 1992-1-1:2004, Eurocode 2: Design of concrete structures — Part 1-1: General rules and rules for buildings. SIST EN 13747:2005+A1:2009



EN 13747:2005+A1:2008 (E) 9 EN 1992-1-2:2004, Eurocode 2: Design of concrete structures — Part 1-2: General rules — Structural fire design. 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. For general terms EN 13369:2004 shall apply. 3.1 Floor plates 3.1.1 floor plate generally reinforced or prestressed concrete plates are used as permanent formwork for cast-in-situ concrete, which, when hardened, forms a structurally composite slab with the floor plate NOTE Some floor plates may be used as formwork for cast-in-situ concrete, with no contribution to the strength of the finished floor. 3.1.2 reinforced floor plate floor plate in which reinforcing steel constitutes
the main reinforcement of the composite slab 3.1.3 prestressed floor plate floor plate in which the prestressing steel constitutes all or part of the main reinforcement of the composite slab 3.1.4 floor plate with lattice girders floor plate in which continuous lattice girders are incorporated generally in the longitudinal direction (i.e. parallel to the span) to provide strength and rigidity for transient situations 3.1.5 floor plate with ribs floor plate in which continuous stiffening ribs are positioned generally in the longitudinal direction (i.e. parallel to the span) to provide strength and rigidity for transient situations 3.2 lattice girders two dimensional or three dimensional metallic structure comprising an upper chord, one or more lower chords and continuous or discontinuous diagonals which are welded or mechanically connected to the chords Figure 1 gives some examples of lattice girders.
a) continuous diagonals SIST EN 13747:2005+A1:2009



EN 13747:2005+A1:2008 (E) 10
b) continuous diagonals with steel profile unfilled with concrete
c) discontinuous diagonals Figure 1 — Examples of lattice girders 3.3 stiffening rib continuous concrete profile formed on the upper surface of the floor plate during the precasting operation. It extends generally in the main direction of the floor plate
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.