SIST EN 301 908-3 V3.2.1:2007
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 3: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 3: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive
The present document applies to the following radio equipment type:
- Base Stations for IMT-2000 CDMA Direct Spread (UTRA FDD).
The present document covers requirements for UTRA FDD Base Stations for Releases 99, 4, 5, 6 and 7, including Base Stations supporting HS-PDSCH transmission using QPSK and 16QAM modulation and Base Stations supporting E-DCH. The present document is intended to cover the provisions of Directive 1999/5/EC [1] article 3.2, which states that
"… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present document.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS), ponavljalniki (repetitorji) in uporabniška oprema (UE) za celična omrežja tretje generacije IMT-2000 - 3. del: Harmonizirani EN za IMT-2000, CDMA z neposrednim razprševanjem (“Direct Spread”) (UTRA FDD) (BS), ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 908-3 V3.2.1:2007
01-december-2007
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50 %D]QH
SRVWDMH %6 SRQDYOMDOQLNL UHSHWLWRUML LQXSRUDEQLãNDRSUHPD 8( ]DFHOLþQD
RPUHåMDWUHWMHJHQHUDFLMH,07GHO +DUPRQL]LUDQL(1]D,07&'0$]
QHSRVUHGQLPUD]SUãHYDQMHP ³'LUHFW6SUHDG´ 875$)'' %6 NL]DMHPD
ELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS),
Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks -
Part 3: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering
essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 908-3 Version 3.2.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 908-3 V3.2.1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 908-3 V3.2.1:2007
---------------------- Page: 2 ----------------------
SIST EN 301 908-3 V3.2.1:2007
ETSI EN 301 908-3 V3.2.1 (2007-05)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 3: Harmonized EN for IMT-2000,
CDMA Direct Spread (UTRA FDD) (BS)
covering essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 3 ----------------------
SIST EN 301 908-3 V3.2.1:2007
2 ETSI EN 301 908-3 V3.2.1 (2007-05)
Reference
REN/ERM-TFES-003-3
Keywords
3G, 3GPP, cellular, digital, IMT-2000, mobile,
radio, regulation, UMTS, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2007.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 908-3 V3.2.1:2007
3 ETSI EN 301 908-3 V3.2.1 (2007-05)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .6
1 Scope.7
2 References.7
3 Definitions and abbreviations.8
3.1 Definitions.8
3.2 Abbreviations.9
4 Technical requirements specifications.10
4.1 Environmental profile.10
4.2 Conformance requirements.10
4.2.1 Introduction.10
4.2.2 Spectrum emissions mask.11
4.2.2.1 Definition.11
4.2.2.2 Limit.11
4.2.2.3 Conformance.12
4.2.3 Adjacent channel leakage power ratio (ACLR) .12
4.2.3.1 Definition.12
4.2.3.2 Limits.12
4.2.3.3 Conformance.12
4.2.4 Transmitter spurious emissions.13
4.2.4.1 Definition.13
4.2.4.2 Limits.13
4.2.4.2.1 Spurious emissions.13
4.2.4.2.2 Co-existence with GSM 900.14
4.2.4.2.3 Co-existence with DCS 1800 .14
4.2.4.2.4 Co-existence with services in adjacent frequency bands.15
4.2.4.2.5 Co-existence with UTRA-TDD.15
4.2.4.2.6 Protection of the BS receiver of own or different BS.15
4.2.4.3 Conformance.16
4.2.5 Base station maximum output power.16
4.2.5.1 Definition.16
4.2.5.2 Limit.16
4.2.5.3 Conformance.16
4.2.6 Transmit intermodulation.16
4.2.6.1 Definition.16
4.2.6.2 Limit.16
4.2.6.3 Conformance.16
4.2.7 Receiver spurious emissions.17
4.2.7.1 Definition.17
4.2.7.2 Limit.17
4.2.7.3 Conformance.17
4.2.8 Blocking characteristics.17
4.2.8.1 Definition.17
4.2.8.2 Limit.17
4.2.8.3 Conformance.20
4.2.9 Receiver intermodulation characteristics .20
4.2.9.1 Definition.20
4.2.9.2 Limit.20
4.2.9.3 Conformance.21
4.2.10 Receiver adjacent channel selectivity .21
4.2.10.1 Definition.21
4.2.10.2 Limit.21
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 908-3 V3.2.1:2007
4 ETSI EN 301 908-3 V3.2.1 (2007-05)
4.2.10.3 Conformance.22
5 Testing for compliance with technical requirements.22
5.1 Environmental conditions for testing .22
5.2 Interpretation of the measurement results .22
5.3 Essential radio test suites.24
5.3.1 Spectrum emission mask.24
5.3.1.1 Initial conditions.24
5.3.1.2 Procedures.24
5.3.2 Adjacent Channel Leakage power Ratio (ACLR) .24
5.3.2.1 Initial conditions.24
5.3.2.2 Procedure.25
5.3.3 Transmitter spurious emissions.25
5.3.3.1 Initial conditions.25
5.3.3.2 Procedure.25
5.3.4 Base station maximum output power.25
5.3.4.1 Initial conditions.25
5.3.4.2 Procedure.25
5.3.5 Transmit intermodulation.26
5.3.5.1 Initial conditions.26
5.3.5.2 Procedures.26
5.3.6 Receiver spurious emissions.27
5.3.6.1 Initial conditions.27
5.3.6.2 Procedure.27
5.3.7 Blocking characteristics.27
5.3.7.1 Initial conditions.27
5.3.7.2 Procedure.28
5.3.8 Receiver intermodulation characteristics .28
5.3.8.1 Initial conditions.28
5.3.8.2 Procedures.28
5.3.9 Adjacent Channel Selectivity (ACS) .29
5.3.9.1 Initial conditions.29
5.3.9.2 Procedure.29
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-
RTT).30
Annex B (normative): Base Station configurations.32
B.1 Receiver diversity.32
B.2 Duplexers.32
B.3 Power supply options .32
B.4 Ancillary RF amplifiers.33
B.5 BS using antenna arrays .33
B.5.1 Receiver tests.34
B.5.2 Transmitter tests.34
B.6 Transmit diversity.34
B.7 BS with integrated Iuant BS modem.35
Annex C (informative): Environmental profile specification .36
Annex D (informative): Bibliography.37
Annex E (informative): The EN title in the official languages .38
History .40
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 908-3 V3.2.1:2007
5 ETSI EN 301 908-3 V3.2.1 (2007-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The present document is part 3 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User
Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS and Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 10: "Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive";
Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive";
ETSI
---------------------- Page: 7 ----------------------
SIST EN 301 908-3 V3.2.1:2007
6 ETSI EN 301 908-3 V3.2.1 (2007-05)
Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeater) covering essential
requirements of article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 27 April 2007
Date of latest announcement of this EN (doa): 31 July 2007
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2008
Date of withdrawal of any conflicting National Standard (dow): 31 January 2009
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399 (see bibliography).
ETSI
---------------------- Page: 8 ----------------------
SIST EN 301 908-3 V3.2.1:2007
7 ETSI EN 301 908-3 V3.2.1 (2007-05)
1 Scope
The present document applies to the following radio equipment type:
- Base Stations for IMT-2000 CDMA Direct Spread (UTRA FDD).
This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1.
Table 1: CDMA direct spread Base Station frequency bands
Operating band Direction of transmission CDMA Direct spread Base Station frequency bands
I Transmit 2 110 MHz to 2 170 MHz
Receive 1 920 MHz to 1 980 MHz
III Transmit 1 805 MHz to 1 880 MHz
Receive 1 710 MHz to 1 785 MHz
VII Transmit 2 620 MHz to 2 690 MHz
Receive 2 500 MHz to 2 570 MHz
VIII Transmit 925 MHz to 960 MHz
Receive 880 MHz to 915 MHz
The present document covers requirements for UTRA FDD Base Stations for Releases 99, 4, 5, 6 and 7, including Base
Stations supporting HS-PDSCH transmission using QPSK and 16QAM modulation and Base Stations supporting
E-DCH.
The present document is intended to cover the provisions of Directive 1999/5/EC [1] article 3.2, which states that
"… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio
communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [1] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org/.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[2] Void.
[3] Void.
ETSI
---------------------- Page: 9 ----------------------
SIST EN 301 908-3 V3.2.1:2007
8 ETSI EN 301 908-3 V3.2.1 (2007-05)
[4] ETSI TR 100 028 (all parts) (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics".
[5] ETSI TS 125 141 (V7.6.0): "Universal Mobile Telecommunications System (UMTS);
Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 7.6.0 Release 7)".
[6] Void.
[7] ITU-R Recommendation SM.329-10 (2003): "Unwanted emissions in the spurious domain".
[8] Void.
[9] ITU-T Recommendation O.153 (1992): "Basic parameters for the measurement of error
performance at bit rates below the primary rate".
[10] ETSI EN 301 908-1 (V3.2.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular
networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements,
covering essential requirements of article 3.2 of the R&TTE Directive".
[11] ETSI TS 145 004 (V6.0.0): "Digital cellular telecommunications system (Phase 2+); Modulation
(3GPP TS 45.004 version 6.0.0 Release 6)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following
apply:
ancillary equipment: equipment (apparatus) used in connection with a Base Station
NOTE: This is considered as an ancillary equipment (apparatus) if:
the equipment is intended for use in conjunction with a BS to provide additional operational and/or
control features to the radio equipment, (e.g. to extend control to another position or location);
the equipment cannot be used on a stand alone basis to provide user functions independently of a
BS; and
the BS to which it is connected, is capable of providing some intended operation such as
transmitting and/or receiving without the ancillary equipment (i.e. it is not a sub-unit of the main
equipment essential to the main equipment basic functions).
Base Station class: wide area Base Station, medium range Base Station or local area Base Station, as declared by the
manufacturer
chip rate: rate of "chips" (modulated symbols after spreading) per second
NOTE: The UTRA FDD chip rate is 3,84 Mchip/s.
environmental profile: range of environmental conditions under which equipment, within the scope of the present
document, is required to comply with the provisions of the present document
local area Base Station: Base Stations characterized by requirements derived from picocell scenarios with a BS to UE
minimum coupling loss equal to 45 dB
maximum output power: mean power level per carrier of the Base Station measured at the antenna connector in a
specified reference condition
ETSI
---------------------- Page: 10 ----------------------
SIST EN 301 908-3 V3.2.1:2007
9 ETSI EN 301 908-3 V3.2.1 (2007-05)
mean power: power (transmitted
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.