Satellite Earth Stations and Systems (SES) - Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

The present document defines an information model and protocol for reconfigurable radio frequency interface for reconfigurable MDs. The work is based on the Use Cases defined in ETSI TR 102 944 [i.1], on the system requirements defined in ETSI EN 302 969 [1] and on the radio reconfiguration related architecture for mobile devices defined in ETSI EN 303 095 [i.8].

Satelitske zemeljske postaje in sistemi (SES) - Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU, za zemeljske postaje na mobilnih platformah (ESOMP), ki oddajajo proti satelitom v geostacionarni orbiti in delujejo v frekvenčnih pasovih od 27,5 GHz do 30,0 GHz

Ta dokument opredeljuje informacijski model in protokol za spremenljivi radiofrekvenčni vmesnik za spremenljive MD-je. Delo temelji na primerih uporabe iz dokumenta ETSI TR 102 944 [i.1], sistemskih zahtevah iz dokumenta ETSI EN 302 969 [1] ter preoblikovanju radia glede na arhitekturo za mobilne naprave iz dokumenta ETSI EN 303 095 [i.2].

General Information

Status
Published
Public Enquiry End Date
15-May-2016
Publication Date
14-Jun-2016
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-Jun-2016
Due Date
11-Aug-2016
Completion Date
15-Jun-2016

Buy Standard

Standard
SIST EN 303 978 V2.1.1:2016
English language
73 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Standard
ETSI EN 303 978 V2.1.1 (2016-05) - Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU
English language
73 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.33.060.30Radiorelejni in fiksni satelitski komunikacijski sistemiRadio relay and fixed satellite communications systemsICS:Ta slovenski standard je istoveten z:ETSI EN 303 978 V2.1.1 (2016-05)SIST EN 303 978 V2.1.1:2016en01-september-2016SIST EN 303 978 V2.1.1:2016SLOVENSKI

STANDARD
SIST EN 303 978 V2.1.1:2016

ETSI EN 303 978 V2.1.1 (2016-05) Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

HARMONISED EUROPEAN STANDARD SIST EN 303 978 V2.1.1:2016
ETSI ETSI EN 303 978 V2.1.1 (2016-05) 2

Reference REN/SES-00399 Keywords antenna, earth station, GSO, mobile, regulation, satellite ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88

Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016. All rights reserved.

DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 303 978 V2.1.1:2016

ETSI ETSI EN 303 978 V2.1.1 (2016-05) 3 Contents Intellectual Property Rights ................................................................................................................................ 8 Foreword ............................................................................................................................................................. 8 Modal verbs terminology .................................................................................................................................... 8 Introduction ........................................................................................................................................................ 8 1 Scope ...................................................................................................................................................... 10 2 References .............................................................................................................................................. 11 2.1 Normative references ....................................................................................................................................... 11 2.2 Informative references ...................................................................................................................................... 12 3 Definitions, symbols and abbreviations ................................................................................................. 12 3.1 Definitions ........................................................................................................................................................ 12 3.2 Symbols ............................................................................................................................................................ 14 3.3 Abbreviations ................................................................................................................................................... 14 4 Technical requirements specifications ................................................................................................... 15 4.1 General ............................................................................................................................................................. 15 4.1.1 Environmental profile ................................................................................................................................. 15 4.1.2 Operational configurations ......................................................................................................................... 16 4.1.3 Determination of geographic location of the ESOMP ................................................................................ 16 4.1.4 EIRPAggregate for networks of ESOMPs ........................................................................................................ 16 4.1.5 Presentation of equipment for testing purposes .......................................................................................... 16 4.1.6 Choice of model for testing ........................................................................................................................ 16 4.1.7 Mechanical and electrical design ................................................................................................................ 17 4.1.7.0 General .................................................................................................................................................. 17 4.1.7.1 Marking (equipment identification) ...................................................................................................... 17 4.1.7.2 Equipment identification ....................................................................................................................... 17 4.2 Conformance requirements .............................................................................................................................. 17 4.2.1 Off-axis spurious radiation ......................................................................................................................... 17 4.2.1.1 Justification ........................................................................................................................................... 17 4.2.1.2 Specification.......................................................................................................................................... 17 4.2.1.3 Conformance tests ................................................................................................................................. 18 4.2.2 On-axis spurious radiation .......................................................................................................................... 18 4.2.2.1 Justification ........................................................................................................................................... 18 4.2.2.2 Specification.......................................................................................................................................... 18 4.2.2.2.1 "Carrier-on" radio state .................................................................................................................... 18 4.2.2.2.2 "Carrier-off" and "Emissions disabled" radio states ........................................................................ 19 4.2.2.3 Conformance tests ................................................................................................................................. 19 4.2.3 Off-axis EIRP emission density within the band ........................................................................................ 19 4.2.3.0 General .................................................................................................................................................. 19 4.2.3.1 Justification ........................................................................................................................................... 19 4.2.3.2 Co-polarized Specification .................................................................................................................... 19 4.2.3.3 Void....................................................................................................................................................... 20 4.2.3.4 Cross-polarization Specification ........................................................................................................... 20 4.2.3.5 Burst Transmission Specification .......................................................................................................... 20 4.2.3.6 Off-axis Geometry Specification .......................................................................................................... 20 4.2.3.7 Conformance tests ................................................................................................................................. 21 4.2.4 Uplink Power Control Specification ........................................................................................................... 21 4.2.5 Carrier suppression ..................................................................................................................................... 21 4.2.5.1 Justification ........................................................................................................................................... 21 4.2.5.2 Specification.......................................................................................................................................... 21 4.2.5.3 Conformance tests ................................................................................................................................. 21 4.2.6 Antenna pointing and polarization alignment ............................................................................................. 21 4.2.6.1 Antenna pointing accuracy .................................................................................................................... 21 4.2.6.1.1 Justification ..................................................................................................................................... 21 4.2.6.1.2 Pointing accuracy specification ....................................................................................................... 21 4.2.6.1.3 On-axis cross polarization isolation specification ........................................................................... 22 SIST EN 303 978 V2.1.1:2016

ETSI ETSI EN 303 978 V2.1.1 (2016-05) 4 4.2.6.1.4 Conformance tests ........................................................................................................................... 22 4.2.6.2 Antenna Pointing Error Detection ......................................................................................................... 22 4.2.6.2.0 General ............................................................................................................................................ 22 4.2.6.2.1 Pointing error detection specification .............................................................................................. 22 4.2.6.2.2 Polarization angle alignment specification ...................................................................................... 23 4.2.6.2.3 Conformance tests ........................................................................................................................... 23 4.2.7 Cessation of emissions ................................................................................................................................ 23 4.2.7.1 Justification ........................................................................................................................................... 23 4.2.7.2 Specification.......................................................................................................................................... 23 4.2.7.2.1 Specification 1: Mode of cessation of emissions ............................................................................. 23 4.2.7.2.2 Specification 2: Conditions under which the ESOMP shall cease emissions .................................. 24 4.2.7.2.3 Specification 3: Cessation of emissions .......................................................................................... 24 4.2.7.2.4 Specification 4: Fault conditions ..................................................................................................... 24 4.2.7.3 Conformance tests ................................................................................................................................. 24 4.2.8 Identification of the ESOMP ...................................................................................................................... 24 4.2.8.1 Justification ........................................................................................................................................... 24 4.2.8.2 Specification.......................................................................................................................................... 24 4.2.8.3 Conformance tests ................................................................................................................................. 25 4.2.9 Control and Monitoring Functions (CMFs) ................................................................................................ 25 4.2.9.1 ESOMP States ....................................................................................................................................... 25 4.2.9.1.0 General ............................................................................................................................................ 25 4.2.9.1.1 CMF state diagram .......................................................................................................................... 26 4.2.9.2 Processor monitoring ............................................................................................................................ 27 4.2.9.2.1 Justification ..................................................................................................................................... 27 4.2.9.2.2 Specification .................................................................................................................................... 27 4.2.9.2.3 Conformance tests ........................................................................................................................... 27 4.2.9.3 Transmit subsystem monitoring ............................................................................................................ 28 4.2.9.3.1 Justification ..................................................................................................................................... 28 4.2.9.3.2 Specification .................................................................................................................................... 28 4.2.9.3.3 Conformance tests ........................................................................................................................... 28 4.2.9.4 Power-on/Reset ..................................................................................................................................... 28 4.2.9.4.1 Justification ..................................................................................................................................... 28 4.2.9.4.2 Specification .................................................................................................................................... 28 4.2.9.4.3 Conformance tests ........................................................................................................................... 28 4.2.9.5 Control Channel (CC) and Response Channel (RC) ............................................................................. 28 4.2.9.5.1 Justification ..................................................................................................................................... 28 4.2.9.5.2 Specification .................................................................................................................................... 28 4.2.9.5.3 Conformance tests ........................................................................................................................... 29 4.2.9.6 Network control commands .................................................................................................................. 29 4.2.9.6.1 Justification ..................................................................................................................................... 29 4.2.9.6.2 Specification .................................................................................................................................... 29 4.2.9.6.3 Conformance tests ........................................................................................................................... 30 4.2.9.7 Initial burst transmission ....................................................................................................................... 30 4.2.9.7.1 Justification ..................................................................................................................................... 30 4.2.9.7.2 Specification .................................................................................................................................... 30 4.2.9.7.3 Conformance tests ........................................................................................................................... 30 4.2.9.8 Inhibition of transmissions .................................................................................................................... 30 4.2.9.8.1 Justification ..................................................................................................................................... 30 4.2.9.8.2 Specification .................................................................................................................................... 30 4.2.9.8.3 Conformance tests ........................................................................................................................... 30 4.2.10 Receive antenna off-axis gain pattern ......................................................................................................... 31 4.2.10.1 Justification ........................................................................................................................................... 31 4.2.10.2 Specification.......................................................................................................................................... 31 4.2.10.3 Conformance tests ................................................................................................................................. 31 4.2.11 Blocking performance ................................................................................................................................. 31 4.2.11.1 Justification ........................................................................................................................................... 31 4.2.11.2 Specification.......................................................................................................................................... 31 4.2.11.3 Conformance tests ................................................................................................................................. 32 4.2.12 Adjacent Signal Selectivity ......................................................................................................................... 32 4.2.12.1 Justification ........................................................................................................................................... 32 4.2.12.2 Specification.......................................................................................................................................... 32 4.2.12.3 Conformance tests ................................................................................................................................. 32 SIST EN 303 978 V2.1.1:2016

ETSI ETSI EN 303 978 V2.1.1 (2016-05) 5 5 Testing for compliance with technical requirements .............................................................................. 32 5.1 Environmental conditions for testing ............................................................................................................... 32 5.2 Radio test suites ................................................................................................................................................ 32 6 Test methods for all aspects of the ESOMP ........................................................................................... 33 6.1 General ............................................................................................................................................................. 33 6.1.0 Introduction................................................................................................................................................. 33 6.1.1 Interpretation of measurement results ......................................................................................................... 33 6.1.2 Measuring receiver ..................................................................................................................................... 34 6.2 Off-axis spurious radiation ............................................................................................................................... 35 6.2.0 Introduction................................................................................................................................................. 35 6.2.1 Test method ................................................................................................................................................ 35 6.2.1.0 Test method introduction ...................................................................................................................... 35 6.2.1.1 General .................................................................................................................................................. 35 6.2.1.2 Multi-carrier operation .......................................................................................................................... 35 6.2.2 Measurements up to 1 000 MHz ................................................................................................................. 36 6.2.2.1 Test site ................................................................................................................................................. 36 6.2.2.2 Measuring receivers .............................................................................................................................. 36 6.2.2.3 Procedure .............................................................................................................................................. 36 6.2.3 Measurements above 1 000 MHz ............................................................................................................... 36 6.2.3.0 General .................................................................................................................................................. 36 6.2.3.1 Identification of the significant frequencies of spurious radiation ........................................................ 37 6.2.3.1.1 Test site............................................................................................................................................ 37 6.2.3.1.2 Procedure ......................................................................................................................................... 37 6.2.3.2 Measurement of radiated power levels of identified spurious radiation ................................................ 37 6.2.3.2.1 Test site............................................................................................................................................ 37 6.2.3.2.2 Procedure ......................................................................................................................................... 38 6.2.3.3 Measurement of conducted spurious radiation at the antenna flange .................................................... 39 6.2.3.3.1 Test site............................................................................................................................................ 39 6.2.3.3.2 Procedure ......................................................................................................................................... 39 6.3 On-axis spurious radiation ................................................................................................................................ 40 6.3.1 Test method ................................................................................................................................................ 40 6.3.1.0 General .................................................................................................................................................. 40 6.3.1.1 Test site ................................................................................................................................................. 40 6.3.1.2 Method of measurement ........................................................................................................................ 40 6.3.1.2.1 General ............................................................................................................................................ 40 6.3.1.2.2 Method of measurement at the antenna flange ................................................................................ 40 6.3.1.2.3 Method of measurement for an EUT with antenna .......................................................................... 41 6.4 Off-axis EIRP emission density within the band .............................................................................................. 42 6.4.1 Test method ................................................................................................................................................ 42 6.4.1.0 Introduction ........................................................................................................................................... 42 6.4.1.1 Transmit output power density .............................................................................................................. 42 6.4.1.1.1 General ............................................................................................................................................ 42 6.4.1.1.2 Test site............................................................................................................................................ 42 6.4.1.1.3 Method of measurement .................................................................................................................. 42 6.4.1.2 Antenna transmit gain ........................................................................................................................... 43 6.4.1.2.1 General ............................................................................................................................................ 43 6.4.1.2.2 Test site............................................................................................................................................ 43 6.4.1.2.3 Method of measurement .................................................................................................................. 44 6.4.1.3 Antenna transmit radiation patterns ...................................................................................................... 45 6.4.1.3.1 General ............................................................................................................................................ 45 6.4.1.3.2 Test site............................................................................................................................................ 45 6.4.1.3.3 Test arrangement ............................................................................................................................. 45 6.4.1.3.4 Co-polar radiation pattern - azimuth ................................................................................................ 45 6.4.1.3.5 Co-polar radiation pattern - elevation .............................................................................................. 46 6.4.1.3.6 Cross-polar radiation pattern - azimuth ..........................................................

...

ETSI EN 303 978 V2.1.1 (2016-05)
HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Harmonised Standard for Earth Stations on Mobile Platforms
(ESOMP) transmitting towards satellites in geostationary orbit,
operating in the 27,5 GHz to 30,0 GHz frequency bands
covering the essential requirements
of article 3.2 of the Directive 2014/53/EU
---------------------- Page: 1 ----------------------
2 ETSI EN 303 978 V2.1.1 (2016-05)
Reference
REN/SES-00399
Keywords
antenna, earth station, GSO, mobile, regulation,
satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the

print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM

DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.

3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.

ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 303 978 V2.1.1 (2016-05)
Contents

Intellectual Property Rights ................................................................................................................................ 8

Foreword ............................................................................................................................................................. 8

Modal verbs terminology .................................................................................................................................... 8

Introduction ........................................................................................................................................................ 8

1 Scope ...................................................................................................................................................... 10

2 References .............................................................................................................................................. 11

2.1 Normative references ....................................................................................................................................... 11

2.2 Informative references ...................................................................................................................................... 12

3 Definitions, symbols and abbreviations ................................................................................................. 12

3.1 Definitions ........................................................................................................................................................ 12

3.2 Symbols ............................................................................................................................................................ 14

3.3 Abbreviations ................................................................................................................................................... 14

4 Technical requirements specifications ................................................................................................... 15

4.1 General ............................................................................................................................................................. 15

4.1.1 Environmental profile ................................................................................................................................. 15

4.1.2 Operational configurations ......................................................................................................................... 16

4.1.3 Determination of geographic location of the ESOMP ................................................................................ 16

4.1.4 EIRP for networks of ESOMPs ........................................................................................................ 16

Aggregate

4.1.5 Presentation of equipment for testing purposes .......................................................................................... 16

4.1.6 Choice of model for testing ........................................................................................................................ 16

4.1.7 Mechanical and electrical design ................................................................................................................ 17

4.1.7.0 General .................................................................................................................................................. 17

4.1.7.1 Marking (equipment identification) ...................................................................................................... 17

4.1.7.2 Equipment identification ....................................................................................................................... 17

4.2 Conformance requirements .............................................................................................................................. 17

4.2.1 Off-axis spurious radiation ......................................................................................................................... 17

4.2.1.1 Justification ........................................................................................................................................... 17

4.2.1.2 Specification.......................................................................................................................................... 17

4.2.1.3 Conformance tests ................................................................................................................................. 18

4.2.2 On-axis spurious radiation .......................................................................................................................... 18

4.2.2.1 Justification ........................................................................................................................................... 18

4.2.2.2 Specification.......................................................................................................................................... 18

4.2.2.2.1 "Carrier-on" radio state .................................................................................................................... 18

4.2.2.2.2 "Carrier-off" and "Emissions disabled" radio states ........................................................................ 19

4.2.2.3 Conformance tests ................................................................................................................................. 19

4.2.3 Off-axis EIRP emission density within the band ........................................................................................ 19

4.2.3.0 General .................................................................................................................................................. 19

4.2.3.1 Justification ........................................................................................................................................... 19

4.2.3.2 Co-polarized Specification .................................................................................................................... 19

4.2.3.3 Void....................................................................................................................................................... 20

4.2.3.4 Cross-polarization Specification ........................................................................................................... 20

4.2.3.5 Burst Transmission Specification .......................................................................................................... 20

4.2.3.6 Off-axis Geometry Specification .......................................................................................................... 20

4.2.3.7 Conformance tests ................................................................................................................................. 21

4.2.4 Uplink Power Control Specification ........................................................................................................... 21

4.2.5 Carrier suppression ..................................................................................................................................... 21

4.2.5.1 Justification ........................................................................................................................................... 21

4.2.5.2 Specification.......................................................................................................................................... 21

4.2.5.3 Conformance tests ................................................................................................................................. 21

4.2.6 Antenna pointing and polarization alignment ............................................................................................. 21

4.2.6.1 Antenna pointing accuracy .................................................................................................................... 21

4.2.6.1.1 Justification ..................................................................................................................................... 21

4.2.6.1.2 Pointing accuracy specification ....................................................................................................... 21

4.2.6.1.3 On-axis cross polarization isolation specification ........................................................................... 22

ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 303 978 V2.1.1 (2016-05)

4.2.6.1.4 Conformance tests ........................................................................................................................... 22

4.2.6.2 Antenna Pointing Error Detection ......................................................................................................... 22

4.2.6.2.0 General ............................................................................................................................................ 22

4.2.6.2.1 Pointing error detection specification .............................................................................................. 22

4.2.6.2.2 Polarization angle alignment specification ...................................................................................... 23

4.2.6.2.3 Conformance tests ........................................................................................................................... 23

4.2.7 Cessation of emissions ................................................................................................................................ 23

4.2.7.1 Justification ........................................................................................................................................... 23

4.2.7.2 Specification.......................................................................................................................................... 23

4.2.7.2.1 Specification 1: Mode of cessation of emissions ............................................................................. 23

4.2.7.2.2 Specification 2: Conditions under which the ESOMP shall cease emissions .................................. 24

4.2.7.2.3 Specification 3: Cessation of emissions .......................................................................................... 24

4.2.7.2.4 Specification 4: Fault conditions ..................................................................................................... 24

4.2.7.3 Conformance tests ................................................................................................................................. 24

4.2.8 Identification of the ESOMP ...................................................................................................................... 24

4.2.8.1 Justification ........................................................................................................................................... 24

4.2.8.2 Specification.......................................................................................................................................... 24

4.2.8.3 Conformance tests ................................................................................................................................. 25

4.2.9 Control and Monitoring Functions (CMFs) ................................................................................................ 25

4.2.9.1 ESOMP States ....................................................................................................................................... 25

4.2.9.1.0 General ............................................................................................................................................ 25

4.2.9.1.1 CMF state diagram .......................................................................................................................... 26

4.2.9.2 Processor monitoring ............................................................................................................................ 27

4.2.9.2.1 Justification ..................................................................................................................................... 27

4.2.9.2.2 Specification .................................................................................................................................... 27

4.2.9.2.3 Conformance tests ........................................................................................................................... 27

4.2.9.3 Transmit subsystem monitoring ............................................................................................................ 28

4.2.9.3.1 Justification ..................................................................................................................................... 28

4.2.9.3.2 Specification .................................................................................................................................... 28

4.2.9.3.3 Conformance tests ........................................................................................................................... 28

4.2.9.4 Power-on/Reset ..................................................................................................................................... 28

4.2.9.4.1 Justification ..................................................................................................................................... 28

4.2.9.4.2 Specification .................................................................................................................................... 28

4.2.9.4.3 Conformance tests ........................................................................................................................... 28

4.2.9.5 Control Channel (CC) and Response Channel (RC) ............................................................................. 28

4.2.9.5.1 Justification ..................................................................................................................................... 28

4.2.9.5.2 Specification .................................................................................................................................... 28

4.2.9.5.3 Conformance tests ........................................................................................................................... 29

4.2.9.6 Network control commands .................................................................................................................. 29

4.2.9.6.1 Justification ..................................................................................................................................... 29

4.2.9.6.2 Specification .................................................................................................................................... 29

4.2.9.6.3 Conformance tests ........................................................................................................................... 30

4.2.9.7 Initial burst transmission ....................................................................................................................... 30

4.2.9.7.1 Justification ..................................................................................................................................... 30

4.2.9.7.2 Specification .................................................................................................................................... 30

4.2.9.7.3 Conformance tests ........................................................................................................................... 30

4.2.9.8 Inhibition of transmissions .................................................................................................................... 30

4.2.9.8.1 Justification ..................................................................................................................................... 30

4.2.9.8.2 Specification .................................................................................................................................... 30

4.2.9.8.3 Conformance tests ........................................................................................................................... 30

4.2.10 Receive antenna off-axis gain pattern ......................................................................................................... 31

4.2.10.1 Justification ........................................................................................................................................... 31

4.2.10.2 Specification.......................................................................................................................................... 31

4.2.10.3 Conformance tests ................................................................................................................................. 31

4.2.11 Blocking performance ................................................................................................................................. 31

4.2.11.1 Justification ........................................................................................................................................... 31

4.2.11.2 Specification.......................................................................................................................................... 31

4.2.11.3 Conformance tests ................................................................................................................................. 32

4.2.12 Adjacent Signal Selectivity ......................................................................................................................... 32

4.2.12.1 Justification ........................................................................................................................................... 32

4.2.12.2 Specification.......................................................................................................................................... 32

4.2.12.3 Conformance tests ................................................................................................................................. 32

ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 303 978 V2.1.1 (2016-05)

5 Testing for compliance with technical requirements .............................................................................. 32

5.1 Environmental conditions for testing ............................................................................................................... 32

5.2 Radio test suites ................................................................................................................................................ 32

6 Test methods for all aspects of the ESOMP ........................................................................................... 33

6.1 General ............................................................................................................................................................. 33

6.1.0 Introduction................................................................................................................................................. 33

6.1.1 Interpretation of measurement results ......................................................................................................... 33

6.1.2 Measuring receiver ..................................................................................................................................... 34

6.2 Off-axis spurious radiation ............................................................................................................................... 35

6.2.0 Introduction................................................................................................................................................. 35

6.2.1 Test method ................................................................................................................................................ 35

6.2.1.0 Test method introduction ...................................................................................................................... 35

6.2.1.1 General .................................................................................................................................................. 35

6.2.1.2 Multi-carrier operation .......................................................................................................................... 35

6.2.2 Measurements up to 1 000 MHz ................................................................................................................. 36

6.2.2.1 Test site ................................................................................................................................................. 36

6.2.2.2 Measuring receivers .............................................................................................................................. 36

6.2.2.3 Procedure .............................................................................................................................................. 36

6.2.3 Measurements above 1 000 MHz ............................................................................................................... 36

6.2.3.0 General .................................................................................................................................................. 36

6.2.3.1 Identification of the significant frequencies of spurious radiation ........................................................ 37

6.2.3.1.1 Test site............................................................................................................................................ 37

6.2.3.1.2 Procedure ......................................................................................................................................... 37

6.2.3.2 Measurement of radiated power levels of identified spurious radiation ................................................ 37

6.2.3.2.1 Test site............................................................................................................................................ 37

6.2.3.2.2 Procedure ......................................................................................................................................... 38

6.2.3.3 Measurement of conducted spurious radiation at the antenna flange .................................................... 39

6.2.3.3.1 Test site............................................................................................................................................ 39

6.2.3.3.2 Procedure ......................................................................................................................................... 39

6.3 On-axis spurious radiation ................................................................................................................................ 40

6.3.1 Test method ................................................................................................................................................ 40

6.3.1.0 General .................................................................................................................................................. 40

6.3.1.1 Test site ................................................................................................................................................. 40

6.3.1.2 Method of measurement ........................................................................................................................ 40

6.3.1.2.1 General ............................................................................................................................................ 40

6.3.1.2.2 Method of measurement at the antenna flange ................................................................................ 40

6.3.1.2.3 Method of measurement for an EUT with antenna .......................................................................... 41

6.4 Off-axis EIRP emission density within the band .............................................................................................. 42

6.4.1 Test method ................................................................................................................................................ 42

6.4.1.0 Introduction ........................................................................................................................................... 42

6.4.1.1 Transmit output power density .............................................................................................................. 42

6.4.1.1.1 General ............................................................................................................................................ 42

6.4.1.1.2 Test site............................................................................................................................................ 42

6.4.1.1.3 Method of measurement .................................................................................................................. 42

6.4.1.2 Antenna transmit gain ........................................................................................................................... 43

6.4.1.2.1 General ............................................................................................................................................ 43

6.4.1.2.2 Test site............................................................................................................................................ 43

6.4.1.2.3 Method of measurement .................................................................................................................. 44

6.4.1.3 Antenna transmit radiation patterns ...................................................................................................... 45

6.4.1.3.1 General ............................................................................................................................................ 45

6.4.1.3.2 Test site............................................................................................................................................ 45

6.4.1.3.3 Test arrangement ............................................................................................................................. 45

6.4.1.3.4 Co-polar radiation pattern - azimuth ................................................................................................ 45

6.4.1.3.5 Co-polar radiation pattern - elevation .............................................................................................. 46

6.4.1.3.6 Cross-polar radiation pattern - azimuth ........................................................................................... 46

6.4.1.3.7 Cross-polar radia
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.